Feels like a missfire/ fuel cut at over half throttle
14 May 2004, 09:30 PM
#1
Scooby Regular
Thread Starter
Join Date: May 2002
Location: Dunfermline,Fife Xbox/PS3 Gamertag: RB5black
Posts: 4,746
Likes: 0
Received 0 Likes
on
0 Posts
Feels like a missfire/ fuel cut at over half throttle
My car is an MY99 RB5 with Tek2 + decat + K&N panel I have a boost guage but I don't have a Knocklink
The car hesitaltes and jerk's violently when any more than 50% throttle was applied. The car drove without any problems as long as the throttle application was below 50% @ 13/14 psi
I'm offshore so the car has been parked for two weeks and the fix will have to come when I get home. Does anyone have any experience of similar problem
my first guess would be Plugs/Coil/Throttle sensor ?
Help
Just to add that The Cel hasn't popped up once during this problem.
The car hesitaltes and jerk's violently when any more than 50% throttle was applied. The car drove without any problems as long as the throttle application was below 50% @ 13/14 psi
I'm offshore so the car has been parked for two weeks and the fix will have to come when I get home. Does anyone have any experience of similar problem
my first guess would be Plugs/Coil/Throttle sensor ?Help
Just to add that The Cel hasn't popped up once during this problem.
Last edited by RB5-Black; 14 May 2004 at 09:34 PM. Reason: adding info
06 June 2004, 03:57 PM
#3
Scooby Regular
Join Date: Feb 2004
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
my car doing this as well??? seem's to be fine below 1 bar but if you floor the peddel it's like a miss fire!! but fine if you feed the peddel in have you got it sorted?? if so let me know please
07 June 2004, 06:06 PM
#4
Scooby Regular
Join Date: Oct 2001
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JOHNSTI
my car doing this as well??? seem's to be fine below 1 bar but if you floor the peddel it's like a miss fire!! but fine if you feed the peddel in have you got it sorted?? if so let me know please
His car had not long been serviced before this issue arised... it turned out to be a loose plug lead onto the plug itself.
Reseated and it's sorted!
J
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
