Power steering pump
#1
Has any of u lot ever had a leaking power steering pump? ive taken the resevoir off and checked it for leaks and it seems ok,
the seal on the bottom, the 2 pipes on the side of the bottle and the cap all ok (are the pumps servicable)ie can i re-do gaskets myself ????? CHEERS LADS.
the seal on the bottom, the 2 pipes on the side of the bottle and the cap all ok (are the pumps servicable)ie can i re-do gaskets myself ????? CHEERS LADS.
#2
Scooby Regular
Join Date: Sep 2002
Location: Strathclyde
Posts: 2,443
Likes: 0
Received 0 Likes
on
0 Posts
Thinks its a pretty common problem. I had that and just changed it for a legacy one with the square tank uptop instead. Think you can do a decent fix, but probably best just getting a 2nd hand unit from Grade A or similar.
[Edited by Marky-San - 1/12/2004 8:04:55 PM]
[Edited by Marky-San - 1/12/2004 8:04:55 PM]
#5
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
There are two seals I believe.. one between resevior and pump and one around the shaft on the pump.
Mine was the resevior one leaking and was a few pence from the dealer I bought the other one too which was about £4.
There is also space for another seal but not sure if it is required or not but I fitted one.. between cradle and resevoir but I think it depends on year as to whether you have the cradle or not.
You shouldn't need to replace the resevoir..
Grade A though are www.gradea-subaru.co.uk
JGM
Mine was the resevior one leaking and was a few pence from the dealer I bought the other one too which was about £4.
There is also space for another seal but not sure if it is required or not but I fitted one.. between cradle and resevoir but I think it depends on year as to whether you have the cradle or not.
You shouldn't need to replace the resevoir..
Grade A though are www.gradea-subaru.co.uk
JGM
#7
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: Chester
Posts: 1,052
Likes: 0
Received 0 Likes
on
0 Posts
Mine was leaking through the earth wire on the back of the pump ,sealent had perished .Removed pump and resealed earth wire wire Aroldite and used gasket sealer on bottom gasket and replaced resovoir o-ring , topped up with new fluid and now fine cost £8 for bits and fluid second hand pumps can cost £120 and new £200 worth trying to fix it yourself.
Mark
Mark
Trending Topics
#8
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
You can obtain the manuals via Chris Palmers website here and the power steering pump make up diagram is in the engine section of the manual iirc.
JGM
JGM
#9
Hello!
some days ago i have big problems with fluid coming of the Fillercap on Hillclimb events, after every run i had to top up the fluid caus it was nearly empty! i put a second gasket in the cap itself and the Problem was solved
some days ago i have big problems with fluid coming of the Fillercap on Hillclimb events, after every run i had to top up the fluid caus it was nearly empty! i put a second gasket in the cap itself and the Problem was solved
Thread
Thread Starter
Forum
Replies
Last Post