bigger intercooler for MY96 Help!!!!
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2002
Location: North East Subaru Forum
Posts: 3,920
Likes: 0
Received 0 Likes
on
0 Posts
pavlo will do you some coverters to fit phase 2 injectors into phase 1 rails, think he is doing them for around £30
his e-mail= pavlo@cdtech.co.uk
[Edited by jonny gav - 8/2/2003 9:44:15 PM]
his e-mail= pavlo@cdtech.co.uk
[Edited by jonny gav - 8/2/2003 9:44:15 PM]
#2
Scooby Regular
iTrader: (4)
Join Date: Jan 2003
Location: kent
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
Could anyone outthere help me? i'm trying to fit the later bigger intercooler to my 96 uk spec impreza. I sourced some bits from grade A components who have been very helpful but am still having lots of problems. has anyone done this or know of anyone who has done it?
#5
Scooby Regular
iTrader: (4)
Join Date: Jan 2003
Location: kent
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
I'm having problems with the throttle body and the mounting bractets. the shorter body i've got is the opposite way round to the original and the position switch has a different plug on it? Plus the brackets won't fit on the manifold? is a manifold from the later car the answer? I'm also tr
ying to fit injectors and rails from a 99 mhich is also giving me grief?????!!!!!
ying to fit injectors and rails from a 99 mhich is also giving me grief?????!!!!!
#6
Scooby Regular
Join Date: Apr 2003
Location: Cambridgeshire
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
I used the original throttle body on MY96 but machined it along with the IC. The throttle bodies from the newer models have the idle control valve located in the throttle body so I stuck with the original. When you have located the IC in position once Throttle body and IC have been modified you will find the brackets will not fit. I custom made mine which are a perfect fit. You will also find it easier to mount using a samco hose kit.
#7
Scooby Regular
iTrader: (4)
Join Date: Jan 2003
Location: kent
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
Cheers mate,is this the easiest way as the later throttle body is alredy smaller? how much did you have to take of to get them to fit? any ideas on fitting the 99 injectors as they have to be fitted with the rails and are different? all these mods are to get 300 BHP on a budget so any help for a newbie greatly appreciated!
Trending Topics
#8
Scooby Regular
Join Date: Apr 2003
Location: Cambridgeshire
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
I machined approx 8-9mm off both. To put it into context the standard hose between the Throttle body IC is 52.5mm whereas the samco I am using on the modded IC an Throttle body is 38.5mm. I found there was going to be too much hassle using the newer throttle body. I will be taking the IC off shortly to do some other mods so if time permits I will take some piccies for ya
As far as the injectors go speak to Pavlo as he has adapted various injectors to fit fuel rails.
As far as the injectors go speak to Pavlo as he has adapted various injectors to fit fuel rails.
#10
Scooby Regular
Join Date: Apr 2003
Location: Cambridgeshire
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
Got my samco hoses from demon tweeks they sell 70mm id tube in approx 100mm lengths for about £7-£10. You will need this one for the IC to Throttle body then cut to length.
#11
Scooby Regular
iTrader: (4)
Join Date: Jan 2003
Location: kent
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the help lads, emailed pavlo and will hopefully have the car ready for another trip to the rollers at power engineering soon, hopeing to get 300 bhp with a big lump of torque!
Thread
Thread Starter
Forum
Replies
Last Post
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM