where are the engine loom earth points on an MY93??
08 July 2003, 06:25 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2003
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
I have taken a voltmeter to my coilpack connectors and found that the two that are not sparking dont seem to have an earth. does anyone know whether there is a seperate earth for each pair of packs or a shared one??
so far all i have is two ring connectors for the earth, is there meant to be another one that im not seeing??
so far all i have is two ring connectors for the earth, is there meant to be another one that im not seeing??
08 July 2003, 08:19 PM
#2
Scooby Regular
iTrader: (1)
Join Date: Mar 2002
Location: Norn Iron
Posts: 2,786
Likes: 0
Received 0 Likes
on
0 Posts
There are no 'earths' on the coils. They use a permanent/ign +12v feed, and the coils are triggered via a switched earth, controlled by the ecu. ( through an ign amplifier )
Not sure if the early cars trigger as pairs ( as it would on later cars with the single coil pack ) or as 4 serperate units.
Not sure if the early cars trigger as pairs ( as it would on later cars with the single coil pack ) or as 4 serperate units.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM