Injection Timing of stock ECUs
#1
Does Delta Dash, or the ECUTEK programing software let you know the Injection Timing values ..... ?
If so, anyone knows if the IT values on the stock JECS or DENSO WRX ECUs are only RPM based or RPM and LOAD based ?
IIRC the LINK's IT values could not be changed so probably it uses the same values as the stock JECS/DENSO ECU's .....
Carlos H.
If so, anyone knows if the IT values on the stock JECS or DENSO WRX ECUs are only RPM based or RPM and LOAD based ?
IIRC the LINK's IT values could not be changed so probably it uses the same values as the stock JECS/DENSO ECU's .....
Carlos H.
#5
I think Carlos is referring to when during the engine cycle does the fuel injection pulse start or end.
I certainly don't know this for the standard ECU. The only easy way to find out is to study the injector pulses with an oscillascope.
paul
I certainly don't know this for the standard ECU. The only easy way to find out is to study the injector pulses with an oscillascope.
paul
Trending Topics
#8
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
Carlos
Not a direct answer but an interesting read non the less !!
http://www.stealth316.com/2-fuelinjection.htm#j2
Not a direct answer but an interesting read non the less !!
http://www.stealth316.com/2-fuelinjection.htm#j2
#9
more "interesting" reading:
http://bbs.22b.com/ubb/Forum1/HTML/001165.html
[Edited by carlos_hiraoka - 2/11/2003 8:27:11 PM]
http://bbs.22b.com/ubb/Forum1/HTML/001165.html
[Edited by carlos_hiraoka - 2/11/2003 8:27:11 PM]
Thread
Thread Starter
Forum
Replies
Last Post
jobegold@hotmail.co.uk
ScoobyNet General
2
27 September 2015 09:44 PM