Scoobysport Backbox.....safe on an STi5 fuelling wise
#1
Scooby Regular
Thread Starter
Join Date: May 2001
Location: Scotland
Posts: 4,580
Likes: 0
Received 0 Likes
on
0 Posts
After the stories on here of STi's blowing up potentially not helped by decatting/induction mods I'm kinda worried about fitting a Scoobysport backbox to my STi5 RA
Can anyone tell me if fitting this backbox to my otherwise standard car (catted downpipe with resonater Sti centre) will be enough to alter the fuelling of the car?
It's been mentioned that perhaps an O2 sensor adjustment is recommended
What you reckon?, I run the car on Optimax and NF, just found a Lamba Link that I've hopefully got 1st dibs on aswell to keep an eye on things.
Cheers for any info
John
Can anyone tell me if fitting this backbox to my otherwise standard car (catted downpipe with resonater Sti centre) will be enough to alter the fuelling of the car?
It's been mentioned that perhaps an O2 sensor adjustment is recommended
What you reckon?, I run the car on Optimax and NF, just found a Lamba Link that I've hopefully got 1st dibs on aswell to keep an eye on things.
Cheers for any info
John
#6
Scooby Regular
Join Date: Aug 2002
Location: Lancashire
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
Hi Meg_S,
I doubt it will 'flow' any more then the air intake/downpipe will allow.
If this is all still standard, no worries!
If your only talking backbox, just do it mate
I run P1 with full decat, induction, etc... if you go this far, get a knocklink/lambda & make sure the fuelling is right at all times.
Enjoy,
Steve.
[Edited by The TunnelMeister - 1/18/2003 8:30:31 AM]
I doubt it will 'flow' any more then the air intake/downpipe will allow.
If this is all still standard, no worries!
If your only talking backbox, just do it mate
I run P1 with full decat, induction, etc... if you go this far, get a knocklink/lambda & make sure the fuelling is right at all times.
Enjoy,
Steve.
[Edited by The TunnelMeister - 1/18/2003 8:30:31 AM]
#7
Scooby Regular
iTrader: (1)
John,
Who told you it could alter the fuelling... be interested to know. If you want to check get a lambdalink and knocklink to be on the safe side. If it was MY car i wouldn't worry about just the backbox.... but that's just my opinion.
Go for it .
Tony.
P.s Good choice for the backbox.... i love the sound of my Scoobysport .
Who told you it could alter the fuelling... be interested to know. If you want to check get a lambdalink and knocklink to be on the safe side. If it was MY car i wouldn't worry about just the backbox.... but that's just my opinion.
Go for it .
Tony.
P.s Good choice for the backbox.... i love the sound of my Scoobysport .
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: May 2001
Location: Scotland
Posts: 4,580
Likes: 0
Received 0 Likes
on
0 Posts
Well, fitted it, and the fr1cking thing is knocking under the car somewhere....can't see where
Think it may have something to do with the extra bits underneath for my Diff control
So it looks like its gonna have to come off tomorrow, it does sound superb though
Anyone wanna buy a Scoobysport backbox for a classic?
Think it may have something to do with the extra bits underneath for my Diff control
So it looks like its gonna have to come off tomorrow, it does sound superb though
Anyone wanna buy a Scoobysport backbox for a classic?
#9
Scooby Regular
Join Date: Aug 2002
Location: Lancashire
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
Hi Mega, glad you did it, sorry to hear you've got a prob.
For what its worth I would have thought the b/b joins the centre to the rear of your diff bits. If anything is knocking it it would be the existing centre section? May be worth checking the brackets to make sure they're properly fixed in place?
Just a suggestion mate, don't give up, it's worth it!!
Steve.
For what its worth I would have thought the b/b joins the centre to the rear of your diff bits. If anything is knocking it it would be the existing centre section? May be worth checking the brackets to make sure they're properly fixed in place?
Just a suggestion mate, don't give up, it's worth it!!
Steve.
#10
Scooby Regular
Join Date: Aug 2001
Location: Hampshire
Posts: 10,954
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate!
The knocking SS is quite a common thing I think! I'm pretty sure its the bracket on the left hand side of the BB catching on the bracket on the car. A little bending should cure it
The knocking SS is quite a common thing I think! I'm pretty sure its the bracket on the left hand side of the BB catching on the bracket on the car. A little bending should cure it
#11
Chances are its hitting the rear diff, I had this problem on my type-r with the Scoobysport b/b.
Try a putting couple of small Jubilee clips on the rear hangers to move the b/b over to one side slightly. Worked for me.
Try a putting couple of small Jubilee clips on the rear hangers to move the b/b over to one side slightly. Worked for me.
#12
Scooby Regular
iTrader: (1)
Join Date: Apr 2002
Location: www.ladsoc.co.uk
Posts: 1,135
Likes: 0
Received 0 Likes
on
0 Posts
I have a full ss system on my STi 5. It was running with a HKS induction kit, which after fitting a knocklink and seeing it was detting the odd time, was quickly replaced with the standard air box and K+N.
No more detting and car is a lot smoother.
Run on optimax and millers.
TEK 3 in the pipe line though, just for piece of mind.
XXX
No more detting and car is a lot smoother.
Run on optimax and millers.
TEK 3 in the pipe line though, just for piece of mind.
XXX
#13
Scooby Regular
Join Date: Oct 1998
Location: Scoobysport, Basildon, UK
Posts: 4,300
Likes: 0
Received 0 Likes
on
0 Posts
Mega Stream
If you bought it from Rally Performance (seeing your US address) it is not a Scoobysport sourced backbox.
Rally Performance are still selling the old Hayward and Scott backboxes and these do foul the STi diffs.
Our new Janspeed made backboxes clear both diffs.
If you bought it from Rally Performance (seeing your US address) it is not a Scoobysport sourced backbox.
Rally Performance are still selling the old Hayward and Scott backboxes and these do foul the STi diffs.
Our new Janspeed made backboxes clear both diffs.
Thread
Thread Starter
Forum
Replies
Last Post
charlesr
Engine Management and ECU Remapping
7
26 September 2015 10:46 AM
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM