Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

Ignition Lead recommendations

Thread Tools
 
Search this Thread
 
Old 22 November 2002, 10:50 AM
  #1  
jmca
Scooby Regular
Thread Starter
 
jmca's Avatar
 
Join Date: Nov 2001
Posts: 228
Likes: 0
Received 0 Likes on 0 Posts
Question


Guys,

Just wondering on a few ignition things, it misfires a bit & am going to try & sort the Bosch coils, obviously have to get a set of leads as the coil packs will then be replaced.

What leads do you recommend - any positive/negative thoughts of certain brands etc?

On the issue of spark plugs, I've done a bit of research & foudn the following comparisons -

HGK Denso Iridium HKS
PFR6B-11 PK20PR-P8 IK20 S30i
PFR7B-11 IK22 S35i

The info above shows from what I think & have read through a few searches on Scoobynet.

Just wondering on personal experiences here.

Regards

Johny.
Old 22 November 2002, 01:48 PM
  #2  
David_Wallis
Scooby Regular
 
David_Wallis's Avatar
 
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like on 1 Post
Post

std subaru leads work fine on my bosch coils..

plugs I use are NGKPFR7b's

David
Old 22 November 2002, 03:36 PM
  #3  
jmca
Scooby Regular
Thread Starter
 
jmca's Avatar
 
Join Date: Nov 2001
Posts: 228
Likes: 0
Received 0 Likes on 0 Posts
Post


Cheers David.

I take it the 7s are for a colder plug allowing for a more modified engine with possibility of higher temps inside?

Regards

Johny.
Old 22 November 2002, 09:34 PM
  #4  
Jaay
Scooby Regular
 
Jaay's Avatar
 
Join Date: Aug 2002
Posts: 273
Likes: 0
Received 0 Likes on 0 Posts
Post

I used bosch 8mm HT Leads,and I got NGk Iridiums IX from the states;
http://www.monarchproductsinc.com/ngk.htm

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
04 November 2021 07:12 PM
JTaylor
Non Scooby Related
202
25 December 2016 09:14 AM
toyney83
General Technical
10
02 October 2015 08:38 PM
ally d
ScoobyNet General
6
01 October 2015 09:22 PM
ALEXSTI
General Technical
5
28 September 2015 09:29 PM



Quick Reply: Ignition Lead recommendations



All times are GMT +1. The time now is 01:30 PM.