F itting a SS backbox
#1
Hopefully buying a Second hand magnex bb tomorow,
Any tips on fitting it (tools equipement etc)
never get my hands dirty, but need to start so I
will try and fit myself,
also any tips on what to look out for on buying
a second hand backbox,
Cheers Taffyboyo!!!!!!!
Any tips on fitting it (tools equipement etc)
never get my hands dirty, but need to start so I
will try and fit myself,
also any tips on what to look out for on buying
a second hand backbox,
Cheers Taffyboyo!!!!!!!
#2
Scooby Regular
iTrader: (4)
Join Date: Sep 1999
Location: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Posts: 11,468
Received 22 Likes
on
19 Posts
A set of ramps
Socket set
spanners
Fairy liquid
Be careful don't let the car fall on you or more importantly the B/Box
Two bolts through flange and gasket between
Fairy may help removing 3 rubber band that also hold up Xhorst and the dirt of you hands
Tony
Socket set
spanners
Fairy liquid
Be careful don't let the car fall on you or more importantly the B/Box
Two bolts through flange and gasket between
Fairy may help removing 3 rubber band that also hold up Xhorst and the dirt of you hands
Tony
#3
Scooby Regular
Join Date: Jun 2002
Location: From Kent to Gloucestershire to Berkshire
Posts: 2,905
Likes: 0
Received 0 Likes
on
0 Posts
If it's a new shape, you don't even need the socket set. Just a 14mm socket with a ratchet, and a 14mm spanner to put on the other end. Think the bolts on the clasic are the same.
you might want to think about changing the gasket between the centre and backbox whilst you're at it, doing so adds about 3 seconds to the fitting time, and is less likely to leak than reusing the old one.
you might want to think about changing the gasket between the centre and backbox whilst you're at it, doing so adds about 3 seconds to the fitting time, and is less likely to leak than reusing the old one.
#5
Scooby Regular
Join Date: Jun 2001
Location: S Wales
Posts: 1,318
Likes: 0
Received 0 Likes
on
0 Posts
#7
How important is the gasket ? I changed my center and back box last Monday but the old gasket fell apart so u used some exhaust paste to join the center and back box together, its not leaking yet so i supose it will be ok....ohhh and those damn spring bolts joining the center to the down pipe ...pain in the ***
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM