HELP WITH KNOCK LINK PLEASE!!
#1
ok i am installing the knock link, without sounding too stupid..(opp too late!)
i need a pic of one installed to the knocklink sensor. any piccies? or advise?
car is a MY95 uk
i need a pic of one installed to the knocklink sensor. any piccies? or advise?
car is a MY95 uk
Trending Topics
#8
Scooby Regular
Not sure what your asking!!!
The Knock sensor bolts to the block (find a threaded hole (theres one under the intercooler) and stick a bolt through the sensor in to it)
Is that what you wanted to know?
Iain.
The Knock sensor bolts to the block (find a threaded hole (theres one under the intercooler) and stick a bolt through the sensor in to it)
Is that what you wanted to know?
Iain.
#9
Hi
I have a knocklink fitted to my car with 2 sensors.One on each head.Problem is I am out of town for a few days but if you can wait until thurs next week I will send you some jpegs of the sensor mountings as well as pics of were I mounted them in my car.Mail me at stevenl29@hotmail.com if I can be any help only a pleasure.
I have a knocklink fitted to my car with 2 sensors.One on each head.Problem is I am out of town for a few days but if you can wait until thurs next week I will send you some jpegs of the sensor mountings as well as pics of were I mounted them in my car.Mail me at stevenl29@hotmail.com if I can be any help only a pleasure.
#11
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
I unbolted the ecu one... stuck the kncocklink one in its place.. stuck the ecu one on top and used a longer bolt...
Look under the bonnet between the throttle body and iscv and down.
David
Look under the bonnet between the throttle body and iscv and down.
David
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM