Injector update
18 September 2002, 10:56 AM
#1
Scooby Regular
Thread Starter
I know people have been on contact via email, but this is the status.
Injectors will be going out today, and I have cleaned out the supplier for now.
I should be able to get them to the cleaners for friday, and should have some sets ready monday-tuesday to cover those people that need them for mapping. Rest will be done thursday I hope, and will go out together.
If anyone is interested in some more, I have been told some should be available in a few weeks. In which case I won't need upfront payment, so can get some in anyway.
Paul
Injectors will be going out today, and I have cleaned out the supplier for now.
I should be able to get them to the cleaners for friday, and should have some sets ready monday-tuesday to cover those people that need them for mapping. Rest will be done thursday I hope, and will go out together.
If anyone is interested in some more, I have been told some should be available in a few weeks. In which case I won't need upfront payment, so can get some in anyway.
Paul
. Suppose you are too busy re wiring peoples house eh!
18 September 2002, 11:42 AM
#6
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
lol at steve... yeah but still had to knock the back out of some...
50 patress boxes sunk and wired now...
3 ring mains in..
All lighting done..
Just cooker point and some more earthbonding to replace...
All tested ok.
Then just a bit of plastering to do.. (oh and board the celing)
Eitherway I have at least 70m of 6mm T&E so I can have some more sockets for the welders!
David
50 patress boxes sunk and wired now...
3 ring mains in..
All lighting done..
Just cooker point and some more earthbonding to replace...
All tested ok.
Then just a bit of plastering to do.. (oh and board the celing)
Eitherway I have at least 70m of 6mm T&E so I can have some more sockets for the welders!
David
Trending Topics
19 September 2002, 11:07 AM
#10
Scooby Regular
Thread Starter
Injectors have arrived back at home, should have got them deliveried to work, nevermind.
Anyway, I will get these to the cleaners tomorrow (friday) and pick some up on monday, get them in the post mon/tues.
So all is looking good for those than needed them in a hurry.
Will post a pic when I get home.
Edited to say, I only received 24 injectors this time round, so Tom, YHM!
Paul
[Edited by Pavlo - 9/19/2002 11:12:50 AM]
Anyway, I will get these to the cleaners tomorrow (friday) and pick some up on monday, get them in the post mon/tues.
So all is looking good for those than needed them in a hurry.
Will post a pic when I get home.
Edited to say, I only received 24 injectors this time round, so Tom, YHM!
Paul
[Edited by Pavlo - 9/19/2002 11:12:50 AM]
19 September 2002, 11:33 AM
#13
Scooby Regular
Thread Starter
nice.
I got her indoors to inspect them, and many are still in the old fuel rails, so I will have some parts that can be butchered to fit these to a phase 1 engine.
David, I'll send you some, you might be able to do something with them.
Paul
I got her indoors to inspect them, and many are still in the old fuel rails, so I will have some parts that can be butchered to fit these to a phase 1 engine.
David, I'll send you some, you might be able to do something with them.
Paul
19 September 2002, 09:19 PM
#15
Scooby Regular
Thread Starter
There are 2 of the 24 which will need to be replaced due to rust, so I will get that sorted ASAP, it won't affect anyone waiting for a remap.
I also found this on the fuel rails...
This is what 24 injectors look like:
I also found this on the fuel rails...
This is what 24 injectors look like:
19 September 2002, 10:55 PM
#17
Scooby Regular
Thread Starter
I got a similar reaction from the supplier.
+"I want such and such an injector"
-"Oh yes, we've got lots of those"
So upon phoning the supplier again, I speak the phone monkey.
+"I'm phoning about the injectors"
-"Yes, how many do you want?"
+"28 please"
-"I'll get the boss..."
*"How big is your engine??????"
+"I want such and such an injector"
-"Oh yes, we've got lots of those"
So upon phoning the supplier again, I speak the phone monkey.
+"I'm phoning about the injectors"
-"Yes, how many do you want?"
+"28 please"
-"I'll get the boss..."
*"How big is your engine??????"
25 September 2002, 01:25 PM
#19
Scooby Regular
Thread Starter
Right then ladies,
After a bit of a mistake with the injector cleaning bods (they bought the wrong adaptor) we are finally moving.
They are currently being cleaned (no adaptor needed) and the flow testing can commence later today with luck (quick process).
So for those that were worried, Scott and Stephen in paticular, there should be no problem in getting the injectors out.
New O-rings look likely, but they are 50-60p EACH, which to me is expensive, but I won't be after more money.
I will let you know more tomorrow.
Paul
After a bit of a mistake with the injector cleaning bods (they bought the wrong adaptor) we are finally moving.
They are currently being cleaned (no adaptor needed) and the flow testing can commence later today with luck (quick process).
So for those that were worried, Scott and Stephen in paticular, there should be no problem in getting the injectors out.
New O-rings look likely, but they are 50-60p EACH, which to me is expensive, but I won't be after more money.
I will let you know more tomorrow.
Paul
)?
25 September 2002, 08:42 PM
#24
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Paul, being an honest yorkshire man, if you are desperate for the money for the o rings, then knock them off what you will owe me for the spark plugs. That is if you still want me to buy them and you get them at WL???
Steven
[Edited by P20SPD - 9/26/2002 8:23:34 AM]
Steven
[Edited by P20SPD - 9/26/2002 8:23:34 AM]
26 September 2002, 03:30 PM
#25
Scooby Regular
Thread Starter
Right then,
3 sets of injectors are done,
Scott w has one (will delivery tonight)
P20SPD has another (will post tomorrow)
Does anyone else need them ASAP? Otherwise I will send the 3rd set to Dowser, as he was first in line.
The rest should be sent out mondayish.
And yes I am working on getting some more.
Paul
3 sets of injectors are done,
Scott w has one (will delivery tonight)
P20SPD has another (will post tomorrow)
Does anyone else need them ASAP? Otherwise I will send the 3rd set to Dowser, as he was first in line.
The rest should be sent out mondayish.
And yes I am working on getting some more.
Paul
26 September 2002, 03:46 PM
#28
Scooby Regular
Thread Starter
I have your's david, I want to at least check they open and close first, and I'll get some carb cleaner just swiz em up a bit, I'll send em tomorrow.
Paul
Paul
26 September 2002, 03:57 PM
#30
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Dave...still feeling groggy. Take it your asking cause i put TY instead of ta. TY=Thank You.
Looks like i will be in work at about 5:30 tomorrow to catch up on todays porr attempt at work.
Looks like i will be in work at about 5:30 tomorrow to catch up on todays porr attempt at work.