Fitting an HKS D/V
#1
Scooby Regular
Thread Starter
iTrader: (11)
Join Date: Jul 2002
Location: Milton Keynes
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
Hi
Can someone please helf with some simple instructions or diagrams on how to fit an HKS D/V to a 94WRX??
I have bought one second hand but the owner didnt have any instructions.
Thanks
Can someone please helf with some simple instructions or diagrams on how to fit an HKS D/V to a 94WRX??
I have bought one second hand but the owner didnt have any instructions.
Thanks
#3
should be a direct swap with existing DV. big hose from intercooler and small hose to throttle body.
bought mine 2nd hand and swapped dircetly, no problems.
hope this helps. u might need hoses and clips if the size of current hose is different
bought mine 2nd hand and swapped dircetly, no problems.
hope this helps. u might need hoses and clips if the size of current hose is different
#6
I wouldn't bother Peggy, it's more or less identical to yours. The better STI intercoolers are the 97 onwards ones, which are double the size, but really need new bonnet, scoop, headlights and grill....
FMIC is what you want, you know it makes sense
FMIC is what you want, you know it makes sense
Trending Topics
#8
Yes it is a straight swap..
All you do is remove old dump valve..... which will leave 2 pipe ends one going into the intercooler and one coming from the air inlet from the air filter...
The HKS DV should have a fitment. so you connect the HKS DV to the right hand pipe thats goes to the intercooler, the other pipe hole coming from the inlet hose will need to have a bug fitted in it...
And then connect the vac line to the old DV vac line you can see it in the pictures...
See here:
Hope this helps mate...!!!
Dan
[Edited by dhorwich - 9/11/2002 1:15:33 PM]
All you do is remove old dump valve..... which will leave 2 pipe ends one going into the intercooler and one coming from the air inlet from the air filter...
The HKS DV should have a fitment. so you connect the HKS DV to the right hand pipe thats goes to the intercooler, the other pipe hole coming from the inlet hose will need to have a bug fitted in it...
And then connect the vac line to the old DV vac line you can see it in the pictures...
See here:
Hope this helps mate...!!!
Dan
[Edited by dhorwich - 9/11/2002 1:15:33 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM
aaron_ions
General Technical
1
17 September 2015 10:42 AM