R160 4.44 Used in Forester?
#1
R160 4.44 Used in Forester?
I'm finding it difficult to locate one of these but have noticed the R160 is used in the Forester and wonder if anyone has worked out if Forester uses a 4.44 version as might be easier and probably Forester bits are not so expensive
#2
Scooby Regular
They do, but not in Europe. (1.081 drop down transfer gears and a 4.111 rear diff)
MY03
MY06 ( K0,K1,KA - Australasian Markets)
MY07 (typo on gear ratio)
EC = Europe LHD
EK = Europe RHD
ER = Europe Ireland
MY03
MY06 ( K0,K1,KA - Australasian Markets)
MY07 (typo on gear ratio)
EC = Europe LHD
EK = Europe RHD
ER = Europe Ireland
Last edited by Don Clark; 12 July 2022 at 09:47 AM.
The following users liked this post:
#5
Scooby Regular
JDM cars up to around 2007 use a 1to1 straight drop gear.........
UK cars have pretty much used the 1.1 to 1 drop to reduce the rear axle speed
what exactly are you trying to do as R160 (or R180) only applies to the rear set-up albeit with slight variances in drive shaft fitment over the years
UK cars have pretty much used the 1.1 to 1 drop to reduce the rear axle speed
what exactly are you trying to do as R160 (or R180) only applies to the rear set-up albeit with slight variances in drive shaft fitment over the years
Thread
Thread Starter
Forum
Replies
Last Post