3.9 to 3.54 output shaft
#1
Scooby Regular
Thread Starter
3.9 to 3.54 output shaft
Hey all,
I was wondering, if I have an STI 6 speed gearbox with a final drive of 3.9 and I want the rear diff to receive a final drive of 3.54, what ratio would I need to change the factory output shaft to?
The current is 1:1 ratio output shaft (31 teeth). What output shaft would I need to accomplish this?
Here is a picture of the output shaft and transfer gear:
I found some output shaft part numbers on the internet but can find any information on how many teeth they have.
33128AA160, 33128AA180
Any help would be much appreciated!
Thanks
I was wondering, if I have an STI 6 speed gearbox with a final drive of 3.9 and I want the rear diff to receive a final drive of 3.54, what ratio would I need to change the factory output shaft to?
The current is 1:1 ratio output shaft (31 teeth). What output shaft would I need to accomplish this?
Here is a picture of the output shaft and transfer gear:
I found some output shaft part numbers on the internet but can find any information on how many teeth they have.
33128AA160, 33128AA180
Any help would be much appreciated!
Thanks
#2
Scooby Regular
It would need to run a 1:1.1 ratio.
The later GDB cars ran a drop set ratio of 1:1.1 with a 3.54 rear diff. Off to top of my head it started from revision F.
So basically, MY06-MY07 cars should run the 3.54 setup from factory, so thats the model year you should be looking at for parts in terms of converting your gearbox.
Best bet would be to speak to @stockcar, it's very likely he will have done this at some point and be able to help further.
The later GDB cars ran a drop set ratio of 1:1.1 with a 3.54 rear diff. Off to top of my head it started from revision F.
So basically, MY06-MY07 cars should run the 3.54 setup from factory, so thats the model year you should be looking at for parts in terms of converting your gearbox.
Best bet would be to speak to @stockcar, it's very likely he will have done this at some point and be able to help further.
#3
Scooby Regular
Thread Starter
It would need to run a 1:1.1 ratio.
The later GDB cars ran a drop set ratio of 1:1.1 with a 3.54 rear diff. Off to top of my head it started from revision F.
So basically, MY06-MY07 cars should run the 3.54 setup from factory, so thats the model year you should be looking at for parts in terms of converting your gearbox.
Best bet would be to speak to @stockcar, it's very likely he will have done this at some point and be able to help further.
The later GDB cars ran a drop set ratio of 1:1.1 with a 3.54 rear diff. Off to top of my head it started from revision F.
So basically, MY06-MY07 cars should run the 3.54 setup from factory, so thats the model year you should be looking at for parts in terms of converting your gearbox.
Best bet would be to speak to @stockcar, it's very likely he will have done this at some point and be able to help further.
Thank you very much for the info! Appreciate it!
Thread
Thread Starter
Forum
Replies
Last Post