aftermarket coolers
#2
Steve
Does it have the 1155 socket ? I presume it does.
This is a great cooler for the money,
http://www.overclockers.co.uk/showpr...odid=HS-036-CM
You'll have to put the backplate on and add some thermo past which you know anyway but its a fairly easy fit and it gives great air cooling, i had one before i bought a Phanteks, i used the 612S on an i5 as well, the 3570K. Its a big cooler so just make sure you have enough room to fit it in, also what RAM do you have ? Is it low profile, if you have tall RAM you will be restricted on coolers.
Does it have the 1155 socket ? I presume it does.
This is a great cooler for the money,
http://www.overclockers.co.uk/showpr...odid=HS-036-CM
You'll have to put the backplate on and add some thermo past which you know anyway but its a fairly easy fit and it gives great air cooling, i had one before i bought a Phanteks, i used the 612S on an i5 as well, the 3570K. Its a big cooler so just make sure you have enough room to fit it in, also what RAM do you have ? Is it low profile, if you have tall RAM you will be restricted on coolers.
Last edited by Rob_Impreza99; 07 February 2013 at 01:08 AM.
#6
Fitted it this morning and unfortunately I had to strip the board out to get the back plate on I have tweaked it to run at 4735ghz and it seems to run quite low idle temps as compared to a standard cooler on standard speeds. If its works well at this speed I think I will up the tuning a little
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM