modded xbox error code 5
#1
Scooby Regular
Thread Starter
Join Date: Sep 2001
Location: www.cumbrianscoobs.co.uk/bbs
Posts: 4,042
Likes: 0
Received 0 Likes
on
0 Posts
modded xbox error code 5
moved my xbox from my computer room to my bed room to watch a dvd and it won't boot up comes up with error code 05, whats happened, and how do i fix it?
cheers mike
cheers mike
#2
Scooby Regular
iTrader: (1)
Join Date: Apr 2001
Location: Yorkshire
Posts: 16,517
Likes: 0
Received 0 Likes
on
0 Posts
utorial written by : Superfro
Description:
When you attempt to boot, a 'you need service' message comes up, and has a LED style number on thetop left hand corner. Here is what they mean.
Disclaimer:
This information is a believed to be correct, should be as close as it gets;
Also:
Bootloader stuff you should never see, since if it fails kernel doesn't boot. (thus you see no message)
Code Who sets it - Description
0 - any - No error (duh)
1 - bootldr - Unknown exactly, something to do with checking the motherboard
2 - bootldr - Eeprom check failed
3 - bootldr - ??/not used
4 - bootldr - Ram check failed
5 - kernel - HDD not locked (retail bioses require the hd to be locked)
6 - kernel - Cannot unlock HDD
7 - kernel - HDD timeout
8 - kernel - No HDD found
9 - kernel - HDD parameters (PIO/DMA/or size {debug}, certain size minimum is required for debug)
10 - kernel - DVD timeout
11 - kernel - No DVD Founnd
12 - kernel - DVD parameters (PIO/DMA)
13 - kernel - Dashboard launch fail (due to missing/bad key, or anything else that would prevent it from running) and the dashboard didn't specify why it failed.
14 - dashboard - Error loading dashboard (dashboard generic error)
15 - - ??/not used
16 - dashboard - Other files to do with dashboard / dashboard settings (specific dashboard error)
17 - - ??/not used
18 - - ??/not used
19 - - ??/not used
20 - kernel - The dashboard was attempted to load and failed; It was a cold boot, and the dashboard didn't specify why it failed, but it (for some reason) needed to be noted that the dvd passed the challenge/response authentication
21 - anywhere - This error says that the machine was booted to display a error, basically someone told the machine to reboot (or launch a xbe) with this flag, and the error code just means its been rebooted by the flag
In closing:
21 was the highest number I could find, I dont think anynthing is past that. And for the unknown ones, I couldn't find anyreference to them at all, I don't believe they are used.
Greets to everyone (who is contributing) in the homebrew scene.
Description:
When you attempt to boot, a 'you need service' message comes up, and has a LED style number on thetop left hand corner. Here is what they mean.
Disclaimer:
This information is a believed to be correct, should be as close as it gets;
Also:
Bootloader stuff you should never see, since if it fails kernel doesn't boot. (thus you see no message)
Code Who sets it - Description
0 - any - No error (duh)
1 - bootldr - Unknown exactly, something to do with checking the motherboard
2 - bootldr - Eeprom check failed
3 - bootldr - ??/not used
4 - bootldr - Ram check failed
5 - kernel - HDD not locked (retail bioses require the hd to be locked)
6 - kernel - Cannot unlock HDD
7 - kernel - HDD timeout
8 - kernel - No HDD found
9 - kernel - HDD parameters (PIO/DMA/or size {debug}, certain size minimum is required for debug)
10 - kernel - DVD timeout
11 - kernel - No DVD Founnd
12 - kernel - DVD parameters (PIO/DMA)
13 - kernel - Dashboard launch fail (due to missing/bad key, or anything else that would prevent it from running) and the dashboard didn't specify why it failed.
14 - dashboard - Error loading dashboard (dashboard generic error)
15 - - ??/not used
16 - dashboard - Other files to do with dashboard / dashboard settings (specific dashboard error)
17 - - ??/not used
18 - - ??/not used
19 - - ??/not used
20 - kernel - The dashboard was attempted to load and failed; It was a cold boot, and the dashboard didn't specify why it failed, but it (for some reason) needed to be noted that the dvd passed the challenge/response authentication
21 - anywhere - This error says that the machine was booted to display a error, basically someone told the machine to reboot (or launch a xbe) with this flag, and the error code just means its been rebooted by the flag
In closing:
21 was the highest number I could find, I dont think anynthing is past that. And for the unknown ones, I couldn't find anyreference to them at all, I don't believe they are used.
Greets to everyone (who is contributing) in the homebrew scene.
#3
Scooby Regular
iTrader: (1)
Join Date: Apr 2001
Location: Yorkshire
Posts: 16,517
Likes: 0
Received 0 Likes
on
0 Posts
Have you got a bigger HD in it? If so you may have knocked the switch on the chip to off or the chip may have moved slightly. If so the Xbox will be trying to boot on the normal BIOS and if your HD isn't locked you will see that error message.
#5
Scooby Regular
iTrader: (1)
Join Date: Apr 2001
Location: Yorkshire
Posts: 16,517
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FASTER MIKE!!
just std hard drive, so the chip might have come lose when i moved it into my bedroom?
I'n not certain the best way to solve it. Let me look on Xbox scene. worth you checking it out as loads of useful info.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM