Bios help
#1
Scooby Regular
Thread Starter
Join Date: Oct 2000
Location: Mansfield Area
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
I have added my scanner but now it is telling me to set the I/O mode to EPP. I have been in the bios but cannot find this. Any one know what part it comes under. Thanks.
#2
Found this
But you might want to have a dig around Microsofts web site too
Cheers Nick
Reboot the system and enter the BIOS setup program (by pressing F2 at boot when prompted)
Select Advanced from the menu displayed across the top of the screen (use cursor keys)
From the Advanced menu, cursor down to Peripheral Configuration and press Enter
From the Peripheral Configuration menu, cursor-down to Parallel Port (which should be displayed as [PnP OS]) and press
Enter Select [Enabled] and press Enter
Cursor-down to Mode (which should be displayed as [ECP]) and press Enter
Dependant on the parallel port device and its requirements, select either EPP or Bi-directional and press Enter
Finally, Press F10 (save settings and exit) then select [Yes] and press return to re-boot the PC.
But you might want to have a dig around Microsofts web site too
Cheers Nick
Reboot the system and enter the BIOS setup program (by pressing F2 at boot when prompted)
Select Advanced from the menu displayed across the top of the screen (use cursor keys)
From the Advanced menu, cursor down to Peripheral Configuration and press Enter
From the Peripheral Configuration menu, cursor-down to Parallel Port (which should be displayed as [PnP OS]) and press
Enter Select [Enabled] and press Enter
Cursor-down to Mode (which should be displayed as [ECP]) and press Enter
Dependant on the parallel port device and its requirements, select either EPP or Bi-directional and press Enter
Finally, Press F10 (save settings and exit) then select [Yes] and press return to re-boot the PC.
Thread
Thread Starter
Forum
Replies
Last Post
scoobyster
Computer & Technology Related
6
15 September 2002 09:48 PM