velryba

when the power is turned on the PWR LED is constantly flashing, no connection established

any idea anyone?

has the modem passed it's working hours?

thanks

DemonDave

iTrader: (13)

Which model modem ... do you mean an efficent networks adsl router 5861 ?

stevem2k

you given it a hard reset ( tiny microswitch underneath )

[caveat: you'll probably need to back up the firmware first]

I seem to recall these had a problem with the psu's though - so it may be more terminal.

A couple of the guys ( though I remember not who ) are more familiar with the en5861 than me.

Steve

Figment

IIRC Mr Footlong is The Daddy with these

DemonDave

iTrader: (13)

Some Help ??

http://www.dslreports.com/forum/rema...,eff~mode=flat

http://www.broadbandreports.com/foru...,eff~mode=flat

http://en5861.5p.org.uk/5861.htm

http://www.btofaq.net/v3/forum/topic.asp?TOPIC_ID=120

I might have a new spare 5861 laying around

Dave.

velryba

basicly it's for kates office and their provider needs to know if the problem is in the modem to send an engineer there to repair it or swap it for new one, so I took it home as I have the same modem here and getting just the blinking PWR LED. So in theory I can say that the modem is the cause of trouble but wanted to be sure.

Thanks for replys, I'll have a look at those links.

velryba

btw yes it is the efficient networks 5861

velryba

ok
problem found, it was the power supply, so they came and changed it

thanks for those links ...