B@st@rd Linksys 10/100 3-port printserver
13 September 2002, 08:18 AM
#1
Scooby Regular
Thread Starter
Join Date: May 2000
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
WTF is up with this or me?
2 PCs running XP. PC 1 has a cable modem via USB and a NIC for the domestic LAN. IP addy 192.168.0.1 / 255.255.255.0 etc.
PC 2 nabs its IP via DHCP from PC 1.
Printserver set to 192.168.0.3. IP does not conflict with PC 1.
The printserver can be pinged but it's BiAdmin config util can't find it (even though both TCP/IP and IPX are installed as required). Printing to it via its driver yields a "cannot connect to printserver" error.
Stumped. Any ideas?
2 PCs running XP. PC 1 has a cable modem via USB and a NIC for the domestic LAN. IP addy 192.168.0.1 / 255.255.255.0 etc.
PC 2 nabs its IP via DHCP from PC 1.
Printserver set to 192.168.0.3. IP does not conflict with PC 1.
The printserver can be pinged but it's BiAdmin config util can't find it (even though both TCP/IP and IPX are installed as required). Printing to it via its driver yields a "cannot connect to printserver" error.
Stumped. Any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
VR6man
Computer & Technology Related
30
19 July 2002 04:36 PM