Pre wash foam recommendation
05 September 2013, 08:55 PM
#3
15 April 2014, 10:38 PM
#5
Scooby Regular
Join Date: Apr 2014
Location: Bristol
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Auto brite magi foam - comes out nice and thick and can dwell on the paintwork easily for around 15 minutes
Haven't used the chemical guys stuff but a friend with an s3 says it's good, little on the runny side but more than adequate as a pre soaker.
As for the last one, it is slightly cheaper, appears quite thin on the paintwork every if you dilute more concentrate with water.
All in all - probably chemical guys or magi foam. If you want 10% off auto brite direct I can get you a code and believe chemical guys are doing 15% off over Easter
Haven't used the chemical guys stuff but a friend with an s3 says it's good, little on the runny side but more than adequate as a pre soaker.
As for the last one, it is slightly cheaper, appears quite thin on the paintwork every if you dilute more concentrate with water.
All in all - probably chemical guys or magi foam. If you want 10% off auto brite direct I can get you a code and believe chemical guys are doing 15% off over Easter
Thread
Thread Starter
Forum
Replies
Last Post