matt-c

iTrader: (5)

Hello all.

Just had my drive done in Marshall's Tegula, the guys had to cut a lot of blocks and apparently the car was not far enough away, so has a film of dust on it !!!

I scared to touch it now in case it scratches the paint/glass, I did put a hose over it, but that has not shifted it.

Can anyone offer some advise

Thanks.

JDM_Stig

iTrader: (3)

snow foam, may need a couple of doses and a jet wash, I wouldnt be putting a mitt near it

allandrick

+1 on the snow foam!

matt-c

iTrader: (5)

OK, thanks, I'm going to try that.

V4JDMSTi

iTrader: (2)

A good thurough jet wash on high pressure,
foam and leave to dwell for 5 to 10 mins,
Jetwash on high pressure,
foam and leave to dwell again,
Jetwash on high pressure,
foam,
wash 2bm with mitt,
Jetwash,
Dry,
Inspect the paint,
Polish if need,
seal / wax.
Job done.