Power tool oe elbow grease
#1
Scooby Regular
Thread Starter
Join Date: Oct 2003
Location: Falkirk, Scotland
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Power tool or elbow grease
Just a quick question, I have just ordered me a load of stuff from Ploished Bliss. Thinking of getting a power polisher, are they worth it and and suggestions on make/ costs and where to get one from?
Last edited by billywizz; 22 February 2006 at 05:16 PM. Reason: spelling
#2
Former Sponsor
iTrader: (3)
Join Date: Feb 2006
Location: AB51 0TH
Posts: 2,562
Likes: 0
Received 0 Likes
on
0 Posts
Thanks very much for the order - it's on it's way already. Machine polishers are well worth the money, but you need to be careful what you choose. I have written a detailed guide to polishing that contains lots of information on the polisher I would recommend - the Porter Cable 7424. This dual action unit is safe for novices and yet has the power to correct even serious paint defects. Cheap polishers (often cordless) often do more damage than good, and the same can be said of professional rotary polishers - in the wrong hands these can easily damage paintwork. Grab a cuppa and have a read of the following link...
How to polish your paint safely by hand or machine
How to polish your paint safely by hand or machine
#3
Scooby Regular
Thread Starter
Join Date: Oct 2003
Location: Falkirk, Scotland
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Had a look at on of the machines you reccomend earlie, looks fantastic, but out of my budget. Was thinging more around the tonne mark if you can advise on a safe alternative.
Also considering a air powered one as I have a compressor.
Will read your guide in lunch tomorrow.......
Also considering a air powered one as I have a compressor.
Will read your guide in lunch tomorrow.......
#4
Former Sponsor
iTrader: (3)
Join Date: Feb 2006
Location: AB51 0TH
Posts: 2,562
Likes: 0
Received 0 Likes
on
0 Posts
The basic 7424 unit is on sale for $129 at the moment - that's only £80 plus shipping. All you then need is a transformer, which will cost about £40, and some starter pads, which will be another £15. That's not much above your budget - I can't think of a decent alternative to the Porter Cable. If needs be, I'd save up a bit more for one rather than buy something else for less that doesn't work as well. I lashed £100 on the Meguiars Cordless Buffer early last year and ended up wishing I hadn't - I bought the PC a few months later and I haven't looked back.
#5
Y'know, it always restores faith to see someone in the business bigging up a product that they don't (and can't) sell. Tends to suggest that the person is not just selling things
Shame that there's no decent alternative - is there anything else in the "professional" marketplace worth looking at?
Shame that there's no decent alternative - is there anything else in the "professional" marketplace worth looking at?
#6
Former Sponsor
iTrader: (3)
Join Date: Feb 2006
Location: AB51 0TH
Posts: 2,562
Likes: 0
Received 0 Likes
on
0 Posts
Not in the dual action (ie randon orbital category) market. I have heard of a few folks modifying Bosch sanders and the like, but to be honest, the PC is such a good tool and so well supported in terms of accessories in my eyes there is no alternative. In the rotary market there is more choice, and Makita and Metabo units are good. However, rotary polishing is not for novices - I'm pretty skilled with the PC but there's no way I'm ready for rotary practice yet!
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Oct 2003
Location: Falkirk, Scotland
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Ok looks like I will be going for the PC, where is the best place to get one from? And what would be the best deal.
When you say transformer, do you mean the type used by most builders that steps down fron 240V to 110V?
When you say transformer, do you mean the type used by most builders that steps down fron 240V to 110V?
Last edited by billywizz; 23 February 2006 at 07:56 AM.
#9
Former Sponsor
iTrader: (3)
Join Date: Feb 2006
Location: AB51 0TH
Posts: 2,562
Likes: 0
Received 0 Likes
on
0 Posts
Yes, same transformer (110V, 700Va). Best place to buy is from Autopia...
www.autopia-carcare.com
They have a special offer on the basic 7424 unit at the moment, only $129 plus shipping. The SFZ pad kits are ok, but in my opinion Lake Country pads perform better and last longer. If you want to buy everything in one go and save money get the SFX pad kit from Autopia - if you want better quality and are prepared to pay out a bit more I can supply all the pads and backing plates you'll need.
www.autopia-carcare.com
They have a special offer on the basic 7424 unit at the moment, only $129 plus shipping. The SFZ pad kits are ok, but in my opinion Lake Country pads perform better and last longer. If you want to buy everything in one go and save money get the SFX pad kit from Autopia - if you want better quality and are prepared to pay out a bit more I can supply all the pads and backing plates you'll need.
#10
Scooby Regular
Join Date: Mar 2002
Location: Poole - in an Isuzu D-Max LE (Prodrive Version) Gamer Tag "Coin Slot"
Posts: 1,485
Likes: 0
Received 0 Likes
on
0 Posts
Another vote here for the PC, brought mine about 6 weeks ago, it's a superb tool.
I had a practise on my transit first, found it so easy that I then went to town on my black Legacy with these results using a mixture of Meguiars/P21S/Klasse.
I had a practise on my transit first, found it so easy that I then went to town on my black Legacy with these results using a mixture of Meguiars/P21S/Klasse.
#11
Scooby Regular
Thread Starter
Join Date: Oct 2003
Location: Falkirk, Scotland
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Well just bit the bullet and ordered a Sonus SFX Polisher Kit. Just got to find ne a transformer now...................... So if I can get hold of a builders one I take it i just need to fit a yellow 3 pin plug to it?
Then I can put some new like in the old girls body, lol
Then I can put some new like in the old girls body, lol
Last edited by billywizz; 23 February 2006 at 03:31 PM.
#13
Scooby Regular
Join Date: Feb 2006
Location: They may be out, but work "mates" keep thrusting them back in :o(
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
#19
Track Day Organiser
#20
Originally Posted by phil_stephens
I would buy one if I was not selling the scooby
#21
Former Sponsor
iTrader: (3)
Join Date: Feb 2006
Location: AB51 0TH
Posts: 2,562
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by phil_stephens
#23
Scooby Regular
Thread Starter
Join Date: Oct 2003
Location: Falkirk, Scotland
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
I ordered mine yesterday from Autopia, Sonus SFX Polisher Kit (250.99USD= £147.46 inc postage), had email this morning to say it was on the way. Then found this on ebay http://cgi.ebay.co.uk/240v-110v-step...QQcmdZViewItem
Hope the weather is good next weeked.........
Hope the weather is good next weeked.........
#24
Don't buy the transformer off eBay, it's no where near man enough for the job.
"consoles and other requiring less than 45 watts.please check your wattage requirements before buying ......watts= volts x amps"
You need nearer 500 watts.
"consoles and other requiring less than 45 watts.please check your wattage requirements before buying ......watts= volts x amps"
You need nearer 500 watts.
#25
Former Sponsor
iTrader: (3)
Join Date: Feb 2006
Location: AB51 0TH
Posts: 2,562
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by phil_stephens
No mention of import duty to be paid !!
#26
Scooby Regular
Thread Starter
Join Date: Oct 2003
Location: Falkirk, Scotland
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PeteT
Don't buy the transformer off eBay, it's no where near man enough for the job.
"consoles and other requiring less than 45 watts.please check your wattage requirements before buying ......watts= volts x amps"
You need nearer 500 watts.
"consoles and other requiring less than 45 watts.please check your wattage requirements before buying ......watts= volts x amps"
You need nearer 500 watts.
Cheers for the info on that one!!!!!!
#27
Moderator
iTrader: (15)
I purchased an item for a friend a few months from Hong Kong back paid the money got it delivered everyone happy.... then after another couple of weeks a bill from customs appeared for import duty... some export companys may not say that you get charged it but they don't charge it customs do I will add it was expected and it was labelled warranty replacment so that old chesnut never worked
Phil they will hear you in a minute GB sounds interesting !!
GB on polishers as well....... no no I don't need one
Simon
Phil they will hear you in a minute GB sounds interesting !!
GB on polishers as well....... no no I don't need one
Simon
#28
Scooby Regular
Join Date: Feb 2002
Location: Behind the 400BHP door :)
Posts: 1,403
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by phil_stephens
I have sent an E-mail to ask whether Import Duty will need to be paid, and to give me a total price delivered to a UK address.
I would defo be interested in Group Buy
#29
Scooby Regular
Join Date: Feb 2002
Location: Behind the 400BHP door :)
Posts: 1,403
Likes: 0
Received 0 Likes
on
0 Posts
Well, had a reply from Maxtool. $70 to ship to UK. They didnt really answer the Ques about the Import duty though.
Just said it will be $70 to ship to the UK using Fed Ex.
Just said it will be $70 to ship to the UK using Fed Ex.