Is it an easy job, looking at the replacement wing, looks like a bolt hides behind the bumper, can the front corner of the bumper be moved to gain access ?


any tips appreciated

cheers

 

its easy if you take the front bumper off. theyre are 2 bolts behind it,also there are 3 bolts running down the door shut 2 you can see if you open the door and 1 underneath.

 

here buddy, if you look in the relevant bit theres pics to show you...

https://www.scoobynet.com/technical-...r-project.html

 

be careful with advice on here, im sure the above is correct but my friend asked for advice on front wing removal and an idiot who is a regular poster on here told her some crap about removing inner wing etc...

 

cheers guys and cheers for the link, using the pic in that thread, its only the 1 bolt on th left that requires the bumper off, so i suppose i could loosen the bumper that side to get to the bolt, seems alot of work to remove the whole bumper for that 1 bolt LOL

 

You don't need to remove front bumper just done mine you can get a bolts by removing wheel arch liner.

 

yup,thats what i did, removed arch liner, then removed the 1 bumper bolt on the corner then eased out the bumper to gain access to that 1 wing bolt thats hidden by bumper

 

I didn't touch my bumper, got to it by wheel arch liner