hi all

does anyone no where i can get a oil pressure sensor from for my prosport gauges as its driving me mad flashing red

 

You need one of these

oil pressure sender

 

cheers fella is there any were over here though i can get one ????

 

This will probably work. They all do the same kind of thing. You need to attach two of the three wires from the cable to this.

GAUGEPLACE ELECTRONIC OIL PRESSURE SENDER 1/8NPT on eBay, also Other Performance Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 17-Apr-08 15:00:00 BST)

The third black wire is ground and should be attached to a grounding point.

 

Oh and you'll need one of these to attach both the oil pressure sender and the OEM switch (for the oil warning light)

GAUGEPLACE SUBARU IMPREZA REMOTE OIL PRESS. ADAPTOR on eBay, also Other Performance Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 17-May-08 19:59:59 BST)

See here for what I mean (first picture)

https://www.scoobynet.com/members-ga...er-gauges.html

 

cheers for the link mate already got the braided adapter just my gauge not reading no oil pressure no more so continuity tested all wiring an found sensor must be u/s or gauge itself so goin for the cheaper an more obvious option first

 

when you buy the stepper gauge pack from xyberautos does it come with this , if not what else will i need to buy to install them ( oil pressure, temp and boost)

 

email nick at gauge place mate you will need the braided hose as shown an you will also need the adapter bung for above no.3 cylinder for oil temp as these do not come with the gauges the sensors do though

 

which gauges are they? the warning and peak recall ones?