Notices
General Technical
Sponsored by:
Sponsored by: CARiD

My99 engine hesitation!

Thread Tools
 
Search this Thread
 
Old Sep 16, 2007 | 08:28 PM
  #1  
LongJonnyGspot's Avatar
LongJonnyGspot
Thread Starter
Scooby Regular
iTrader: (12)
 
Joined: Sep 2007
Posts: 359
Likes: 0
Default My99 engine hesitation!

I have just bought a MY99 with only 41,000 miles. I have noticed a slight hesitation around 2500 - 2750 rpm even when engine is warm. It happens even if only applying a small amount of throttle. The engine feels like it struggling for fuel just for a brief moment. I know this is just before the turbo comes in. It seems to smoothen out when the turbo kicks in! Is this normal?
Thanks in advance for any advice.
Reply
Old Sep 16, 2007 | 08:41 PM
  #2  
drb5's Avatar
drb5
Scooby Regular
20 Year Member
iTrader: (4)
 
Joined: Jun 2003
Posts: 9,201
Likes: 0
From: Scotchland
Default

Possibly get some new Subaru coil leads, or if you know anyone with a similar year car, then swop the leads over for a trial first?
Reply
Old Sep 16, 2007 | 08:52 PM
  #3  
LongJonnyGspot's Avatar
LongJonnyGspot
Thread Starter
Scooby Regular
iTrader: (12)
 
Joined: Sep 2007
Posts: 359
Likes: 0
Default

Cheers, I'll try that. Any other possible solutions?
Reply
Old Sep 16, 2007 | 09:12 PM
  #4  
exvaux's Avatar
exvaux
Scooby Regular
iTrader: (1)
 
Joined: Jun 2007
Posts: 1,845
Likes: 0
From: throwing pieces oot a 20 storey flat
Default

the old favourite the mass air flow meter might be on its way out or when was it last serviced?
Reply
Old Sep 16, 2007 | 09:19 PM
  #5  
Skooby53's Avatar
Skooby53
Scooby Regular
iTrader: (1)
 
Joined: Aug 2007
Posts: 641
Likes: 0
Default

I had exactly the same problem on my MY99 I have put in a new KN panel filter, thrown the standard one in the bin! It seems to have cured the problem. Good luck.
Reply
Old Sep 17, 2007 | 09:01 AM
  #6  
tmo's Avatar
tmo
Scooby Regular
 
Joined: Mar 2003
Posts: 3,122
Likes: 0
From: Rotherham, Oderint Dum Metuant
Default

MAF or Boost valve.

i put a procedure up a couple of years ago for cleaning the valve, do a search it should be still around.
Reply
Old Sep 17, 2007 | 09:15 AM
  #7  
drb5's Avatar
drb5
Scooby Regular
20 Year Member
iTrader: (4)
 
Joined: Jun 2003
Posts: 9,201
Likes: 0
From: Scotchland
Default

If it's revs related, then i doubt it's MAF or solenoid.

IMHO it's leads or plugs.
Reply
Old Sep 17, 2007 | 09:22 AM
  #8  
Zola-the-master's Avatar
Zola-the-master
Scooby Regular
 
Joined: Mar 2007
Posts: 258
Likes: 0
From: Shropshire
Default

I had this problem at exactly the same rev range in my 00MY It turned out to be a broken lambda sensor which i replaced with a non genuine part from a certain auction site at the huge cost of £15
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
Sam Witwicky
Engine Management and ECU Remapping
17
Nov 13, 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
Oct 2, 2015 05:26 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
tjapplejuice
Drivetrain
9
Sep 25, 2015 03:46 PM




All times are GMT +1. The time now is 09:18 AM.