Wots involved MY97/98 IC onto a MY93
Thread Starter
Scooby Regular
Joined: Aug 2001
Posts: 2,467
Likes: 0
From: Stockport Cheshire Xbox Gamertag: Scooby WRX SMACS Member
Wots involved MY97/98 IC onto a MY93
As above wots involed in doing this I take it the DV port on the right of the IC needs blanking off so that the OEM DV can be run, but does anthing else need hacking !!!!!
Si
Si
On an MY97/98 cooler you will need to cut off the dump valve elbow, in order to clear the idle control valve.
Also trim a small amount of the intake pipe wehre it joins the throttle housing via the thick dumpy hose.
You can also re-use the intercooler to turbo hoses to mount the DV, if you are lucky enough to have samco's from both the MY97/98 cooler and slanty Pre97 cooler.
A small amount of bulkhead massage may also be required to stop it rattling when driving.
See pics below of RobEvo5's car. As he done it last week.
Also trim a small amount of the intake pipe wehre it joins the throttle housing via the thick dumpy hose.
You can also re-use the intercooler to turbo hoses to mount the DV, if you are lucky enough to have samco's from both the MY97/98 cooler and slanty Pre97 cooler.
A small amount of bulkhead massage may also be required to stop it rattling when driving.
See pics below of RobEvo5's car. As he done it last week.
Scooby Regular
Joined: Oct 2004
Posts: 49
Likes: 0
From: Stafford
how u fit that ?
How did you get that IC to fit ? i have a IC off a 1999 model and will not fit in , way too big , hits bulkhead and also pipes underneath hit the stabliser bar mounting point...i found the only way it would fit is by changing inlet manifold.
Originally Posted by Scott.T
On an MY97/98 cooler you will need to cut off the dump valve elbow, in order to clear the idle control valve.
Also trim a small amount of the intake pipe wehre it joins the throttle housing via the thick dumpy hose.
You can also re-use the intercooler to turbo hoses to mount the DV, if you are lucky enough to have samco's from both the MY97/98 cooler and slanty Pre97 cooler.
A small amount of bulkhead massage may also be required to stop it rattling when driving.
See pics below of RobEvo5's car. As he done it last week.
http://img.photobucket.com/albums/v4...5/DSCF0158.jpg
Also trim a small amount of the intake pipe wehre it joins the throttle housing via the thick dumpy hose.
You can also re-use the intercooler to turbo hoses to mount the DV, if you are lucky enough to have samco's from both the MY97/98 cooler and slanty Pre97 cooler.
A small amount of bulkhead massage may also be required to stop it rattling when driving.
See pics below of RobEvo5's car. As he done it last week.
http://img.photobucket.com/albums/v4...5/DSCF0158.jpg
Scooby Regular
Joined: Apr 2003
Posts: 1,541
Likes: 0
From: Cambridgeshire
Before I fitted an FMIC I had a MY00 TMIC on MY96 - piccies below
You will need remove at least 5mm of material from the throttle body and from the TMIC outlet - you will also need to 'modify' 
the mount directly below either by cutting away or 'massaging' lol to gain clearance. I also fabricated my own mounting brackets - well worthwhile though 
Cheers
How did you get that IC to fit ? i have a IC off a 1999 model and will not fit in , way too big , hits bulkhead and also pipes underneath hit the stabliser bar mounting point...i found the only way it would fit is by changing inlet manifold.
the mount directly below either by cutting away or 'massaging' lol to gain clearance. I also fabricated my own mounting brackets - well worthwhile though Cheers
Scooby Regular
Joined: Oct 2004
Posts: 49
Likes: 0
From: Stafford
Nice one , may look into trying to fit it again as still got the IC that i got for £35 of ebay and have also got the bonnet plate too .. did you find a big difference in performance with larger IC ?
Also how do you put pic on here as can show you the IC i have to see if you think is the same ?
Cheers
Karl
Also how do you put pic on here as can show you the IC i have to see if you think is the same ?
Cheers
Karl
Originally Posted by Delboy2
Before I fitted an FMIC I had a MY00 TMIC on MY96 - piccies below
http://photos.fotango.com/p/eba00347408f00000039.jpg http://photos.fotango.com/p/eba00347408f00000040.jpg
http://photos.fotango.com/p/eba00347408f00000043.jpg http://photos.fotango.com/p/eba00347408f00000008.jpg
You will need remove at least 5mm of material from the throttle body and from the TMIC outlet - you will also need to 'modify' the mount directly below either by cutting away or 'massaging' lol to gain clearance. I also fabricated my own mounting brackets - well worthwhile though
Cheers
http://photos.fotango.com/p/eba00347408f00000039.jpg http://photos.fotango.com/p/eba00347408f00000040.jpg
http://photos.fotango.com/p/eba00347408f00000043.jpg http://photos.fotango.com/p/eba00347408f00000008.jpg
You will need remove at least 5mm of material from the throttle body and from the TMIC outlet - you will also need to 'modify'
the mount directly below either by cutting away or 'massaging' lol to gain clearance. I also fabricated my own mounting brackets - well worthwhile though Cheers
Scooby Regular
Joined: Oct 2004
Posts: 49
Likes: 0
From: Stafford
my IC
Cheers WAH
Just done pictures of my IC ...this is the one i tried to fit but too big , but you say they can be fitted..is this the same as yours ? and can it be fitted to 96 WRX ?
http://tinypic.com/1sdpjq
http://tinypic.com/1sdpvk
Just done pictures of my IC ...this is the one i tried to fit but too big , but you say they can be fitted..is this the same as yours ? and can it be fitted to 96 WRX ?
http://tinypic.com/1sdpjq
http://tinypic.com/1sdpvk
Trending Topics
Scooby Regular
Joined: Oct 2004
Posts: 49
Likes: 0
From: Stafford
nice
What is that off and how much different is that to the one i have ,i can see that its made of metal not alloy on the sides...but what about dimensions etc ?
Originally Posted by wah
Thread Starter
Scooby Regular
Joined: Aug 2001
Posts: 2,467
Likes: 0
From: Stockport Cheshire Xbox Gamertag: Scooby WRX SMACS Member
Right what I now need to know is what scoop/undertray can I fit to my MY93 bonnet that will slot straight in, I have borrowed a 99 scoop but it will need mass cutting of the bonnet which I don't really want to do
Si
Si
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
17
Nov 3, 2021 11:07 AM
aaron_ions
General Technical
1
Sep 17, 2015 10:42 AM