??any ideas??
RB5 MY99
Due a service, booked for a couple of weeks time.
Clutch does need replacing.
Question.
Noticed when driving the car on Sunday there's a vibration coming from the engine area that i can feel through the steering wheel.
It's only when i'm in a gear pulling away.
Any gear when pulling away i can feel the vibration, foot off the gas and it stops, put the clutch down and it stops, free wheel in neutral with clutch up and i can't notice it.
The gearbox oil is fine.
Engine oil was a bit low 2 weeks ago so i topped it up. now it's a bit high but been that high before.
Any ideas??
Thanks Adam
Due a service, booked for a couple of weeks time.
Clutch does need replacing.
Question.
Noticed when driving the car on Sunday there's a vibration coming from the engine area that i can feel through the steering wheel.
It's only when i'm in a gear pulling away.
Any gear when pulling away i can feel the vibration, foot off the gas and it stops, put the clutch down and it stops, free wheel in neutral with clutch up and i can't notice it.
The gearbox oil is fine.
Engine oil was a bit low 2 weeks ago so i topped it up. now it's a bit high but been that high before.
Any ideas??
Thanks Adam
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Flywheel judder?...try this...slowly press the clutch pedal in bit by bit(with engine on)...if you feel a vibration on the pedal its defo the flywheel.
Bob
Bob
Only feel the vibration when in gear and speeding up.
Can now hear a scrapping noise, more when turning wheel right slightly.
Think it could be a drive shaft.
How much ££££ should i be looking to spend getting it done at a subaru garage?
Adam
Can now hear a scrapping noise, more when turning wheel right slightly.
Think it could be a drive shaft.
How much ££££ should i be looking to spend getting it done at a subaru garage?
Adam
When i asked the question on how much? i ment for a new drive shaft.
Now that clutches have been brought up, what and how much for a good one i.e. a high performance low slip heavy duty. Cars producing 286 bhp.
Thanks Adam
Now that clutches have been brought up, what and how much for a good one i.e. a high performance low slip heavy duty. Cars producing 286 bhp.
Thanks Adam
Originally Posted by rb5037
When i asked the question on how much? i ment for a new drive shaft.
Now that clutches have been brought up, what and how much for a good one i.e. a high performance low slip heavy duty. Cars producing 286 bhp.
Thanks Adam
Now that clutches have been brought up, what and how much for a good one i.e. a high performance low slip heavy duty. Cars producing 286 bhp.
Thanks Adam
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
Sep 25, 2015 08:31 PM






