Uni-Chip & MY00
Thread Starter
Scooby Regular
Joined: Sep 1998
Posts: 496
Likes: 0
A little help needed,
I know this subject has been done many times but I have not yet seen anyone report on fitting a Uni-Chip to this model year.
Have already fitted a new downpipe, de-cat centre section , backbox and induction kit.
Any response from 99/00 model year converstions especially appreciated.
Thanks
I know this subject has been done many times but I have not yet seen anyone report on fitting a Uni-Chip to this model year.
Have already fitted a new downpipe, de-cat centre section , backbox and induction kit.
Any response from 99/00 model year converstions especially appreciated.
Thanks
Scooby Regular
Joined: Nov 1998
Posts: 1,445
Likes: 0
From: Derby, land of road legal race cars.
Hey there Grant...
I am in a similar position...I carried forward all my mods from my 97 Turbo to my 2000 spec car.
I too am considering the various ECU options at present...but I am swayed toward brake upgrades as I use my car quite regularly on the track.
I will follow this thread with interest
Happy Hunting
Ian
I am in a similar position...I carried forward all my mods from my 97 Turbo to my 2000 spec car.
I too am considering the various ECU options at present...but I am swayed toward brake upgrades as I use my car quite regularly on the track.
I will follow this thread with interest
Happy Hunting
Ian
Scooby Regular
Joined: Mar 2000
Posts: 8,619
Likes: 24
From: 5 beats 4 - RS3 Rulez!!!
Grant...
The UNICHIP conversion will work the same for any MY year model. It all depends on how much boost you wish to run, to how BHP/TORQUE you want!
1.2 bar is about the limit for a UK car, for reliability!
From this you should expect about 30 bhp (or 50 bhp on other rollers!
)with a exhaust and filter! If you are considering a CHIP upgrade, then I would suggest you go for a cat-less exhaust system as well. Scoobies seem to have a major bottleneck in the cat side of things, if more power is required.
Just remember that NEARLY all exhausts and filter system's will not give much BHP over standard. If you want REAL power, you need to ditch the cats & get a chip/ecu (or take your car to POWER ENGINEERING)
Speak to Rich @ Powerstation for more info...
Shaun.
P.S. Ignore the article in Banzai magazine, concerning the UNICHIP upgrade. The boost was not raised that much, hence the low power figures!
The UNICHIP conversion will work the same for any MY year model. It all depends on how much boost you wish to run, to how BHP/TORQUE you want!
1.2 bar is about the limit for a UK car, for reliability!
From this you should expect about 30 bhp (or 50 bhp on other rollers!
)with a exhaust and filter! If you are considering a CHIP upgrade, then I would suggest you go for a cat-less exhaust system as well. Scoobies seem to have a major bottleneck in the cat side of things, if more power is required.Just remember that NEARLY all exhausts and filter system's will not give much BHP over standard. If you want REAL power, you need to ditch the cats & get a chip/ecu (or take your car to POWER ENGINEERING
)Speak to Rich @ Powerstation for more info...
Shaun.
P.S. Ignore the article in Banzai magazine, concerning the UNICHIP upgrade. The boost was not raised that much, hence the low power figures!
Thread Starter
Scooby Regular
Joined: Sep 1998
Posts: 496
Likes: 0
Thanks for the input,
Shaun I already have a full cat-less system but when I spoke to Power they did not recommend chip this model.
Just happened to be in Luton today so popped along to PTS for a run on their dyno and was very pleased.
235 bhp
251 lbft
I wonder what fitting a Uni-Chip may acheive now.
Grant
Shaun I already have a full cat-less system but when I spoke to Power they did not recommend chip this model.
Just happened to be in Luton today so popped along to PTS for a run on their dyno and was very pleased.
235 bhp
251 lbft
I wonder what fitting a Uni-Chip may acheive now.
Grant
Scooby Regular
Joined: Mar 2000
Posts: 8,619
Likes: 24
From: 5 beats 4 - RS3 Rulez!!!
Was the comment made by PE, anything to do with the fact that THEY don't have any maps for that year for there ECU conversion
The principal of the UNICHIP will work on any car. The UNICHIP itself WILL fit ANY car, it's just the wiring that would be different!
It uses the simple modification of fueling & ignition & boost!!!! The principal of mapping is the same, regardless of car type or model!
Shaun.
The principal of the UNICHIP will work on any car. The UNICHIP itself WILL fit ANY car, it's just the wiring that would be different!
It uses the simple modification of fueling & ignition & boost!!!! The principal of mapping is the same, regardless of car type or model!
Shaun.
Thread Starter
Scooby Regular
Joined: Sep 1998
Posts: 496
Likes: 0
Shaun what I meant was that Power Engineering did not recommend any chip upgrade to this model year at all.
Having spoken to Powerstation they agreed that the superchip was definatley not advisable on this model year but the Uni-Chip was more than appropriate and though they had only done a couple of convertions to this model year the customers had been pleased with the results.
The results that I got at PTS today have made me wonder is there is more torque to be had given that this is very near the standard for a WRX .
Having spoken to Powerstation they agreed that the superchip was definatley not advisable on this model year but the Uni-Chip was more than appropriate and though they had only done a couple of convertions to this model year the customers had been pleased with the results.
The results that I got at PTS today have made me wonder is there is more torque to be had given that this is very near the standard for a WRX .
Trending Topics
Scooby Regular
Joined: Mar 2000
Posts: 8,619
Likes: 24
From: 5 beats 4 - RS3 Rulez!!!
Grant...
Not wishing to get inthrawled in another "Who's got the most accurate Dyno", but forget what figures you have now.
If you do back to back testing - before and after on the same day -, you will get a relevant comparison. By fitting a UNICHIP (by a good mapper aka PS) YOU WILL have an increase in torque and bhp! The figures may be different on different rollers, but the before & after will show an increase nether the less.
Take the plunge, and become another happy UNICHIPPER!
Shaun.
Not wishing to get inthrawled in another "Who's got the most accurate Dyno", but forget what figures you have now.
If you do back to back testing - before and after on the same day -, you will get a relevant comparison. By fitting a UNICHIP (by a good mapper aka PS) YOU WILL have an increase in torque and bhp! The figures may be different on different rollers, but the before & after will show an increase nether the less.
Take the plunge, and become another happy UNICHIPPER!
Shaun.
Grant,
I believe the same rollers that you went on produced over 380ft/lb of torque for a LINK modded Scoob (STi)
Make of that what you will!
R
[This message has been edited by Rannoch (edited 10-06-2000).]
I believe the same rollers that you went on produced over 380ft/lb of torque for a LINK modded Scoob (STi)
Make of that what you will!
R
[This message has been edited by Rannoch (edited 10-06-2000).]
Scooby Regular
Joined: Jan 2000
Posts: 516
Likes: 0
Sorry off the topic a bit but after removing the cat as mentioned above does this mean that the car involved will not pass an MoT due to high CO emissions.
Presumably the cat removes nearly all the CO from exhaust gases so removing it will result in high CO levels and MoT failure. Or is the test not that rigorous?
I would like to replace the whole exhaust system but I would like to run the car for more than 3 years.
D.
Presumably the cat removes nearly all the CO from exhaust gases so removing it will result in high CO levels and MoT failure. Or is the test not that rigorous?
I would like to replace the whole exhaust system but I would like to run the car for more than 3 years.
D.
Scooby Regular
Joined: Nov 1998
Posts: 1,391
Likes: 0
From: Bristol
The car will not pass an MOT with no cats. Unless you can get an MOT down the pub it will be cats on MOT cats off await another year cats on MOT cats off. Hope your ok with the spanners or it could work out expensive. 
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
17
Nov 3, 2021 11:07 AM
aaron_ions
General Technical
1
Sep 17, 2015 10:42 AM