Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

Ignition Lead recommendations

Thread Tools
 
Search this Thread
 
Old Nov 22, 2002 | 10:50 AM
  #1  
jmca's Avatar
jmca
Thread Starter
Scooby Regular
 
Joined: Nov 2001
Posts: 228
Likes: 0
Question


Guys,

Just wondering on a few ignition things, it misfires a bit & am going to try & sort the Bosch coils, obviously have to get a set of leads as the coil packs will then be replaced.

What leads do you recommend - any positive/negative thoughts of certain brands etc?

On the issue of spark plugs, I've done a bit of research & foudn the following comparisons -

HGK Denso Iridium HKS
PFR6B-11 PK20PR-P8 IK20 S30i
PFR7B-11 IK22 S35i

The info above shows from what I think & have read through a few searches on Scoobynet.

Just wondering on personal experiences here.

Regards

Johny.
Reply
Old Nov 22, 2002 | 01:48 PM
  #2  
David_Wallis's Avatar
David_Wallis
Scooby Regular
 
Joined: Nov 2001
Posts: 15,239
Likes: 1
From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Post

std subaru leads work fine on my bosch coils..

plugs I use are NGKPFR7b's

David
Reply
Old Nov 22, 2002 | 03:36 PM
  #3  
jmca's Avatar
jmca
Thread Starter
Scooby Regular
 
Joined: Nov 2001
Posts: 228
Likes: 0
Post


Cheers David.

I take it the 7s are for a colder plug allowing for a more modified engine with possibility of higher temps inside?

Regards

Johny.
Reply
Old Nov 22, 2002 | 09:34 PM
  #4  
Jaay's Avatar
Jaay
Scooby Regular
 
Joined: Aug 2002
Posts: 273
Likes: 0
Post

I used bosch 8mm HT Leads,and I got NGk Iridiums IX from the states;
http://www.monarchproductsinc.com/ngk.htm

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
JTaylor
Non Scooby Related
202
Dec 25, 2016 09:14 AM
toyney83
General Technical
10
Oct 2, 2015 08:38 PM
ally d
ScoobyNet General
6
Oct 1, 2015 09:22 PM
ALEXSTI
General Technical
5
Sep 28, 2015 09:29 PM




All times are GMT +1. The time now is 09:26 AM.