well,my 1st time on the rollers and...........
lol i do like them alot, but to find one which will cause no problems would be like finding rocking horse ****.... these days most people take the abs off them as its soo rubbish lol
Fitting AVCS heads is not the problem getting them to work is,my wife is doing it on here classic as I'm swapping my engine into her classic,but I think with her car is more problems as she is keeping her loom and inlet manifold so at minimum her car needed after market ecu custom loom extension to run the AVCS heads but as yours is a newage it might be a tad more simpler.SJ.
Fitting AVCS heads is not the problem getting them to work is,my wife is doing it on here classic as I'm swapping my engine into her classic,but I think with her car is more problems as she is keeping her loom and inlet manifold so at minimum her car needed after market ecu custom loom extension to run the AVCS heads but as yours is a newage it might be a tad more simpler.SJ.
newage sti loom and ecu or syvecs
On a Newage WRX you will need a Newage Sti ecu at the least to run it as the WRX one doesn't have the function, Not too difficult after that, If you still have the TGV wiring they us that and add an additional 2/3 more to the ecu I did it on my last scoob, Bad luck BTW but that's modding for you love it or hate it 
Scooby Senior
iTrader: (3)
Joined: Jun 2006
Posts: 14,333
Likes: 0
From: Slowly rebuilding the kit of bits into a car...
Sorry to hear your news, but my STI went from 265 to 400+ over ten years and was thrashed and abused on track as well, before I had a 2.1 build done before I broke it by running 2+ bar of boost for the last couple of years....
dunx
dunx
i guess its just a random thing i suppose,im not gonna get all pissy over it.in one way its pushed me now to get a proper build done
just had a look on real street website................very good prices.did you get stung with import tax etc?
ive not really had any major problems to be honest
-i had to replace the original turbo after 98k it was goosed-these dont last forever
-the brakes gave me a nightmare as the persons that fitted them had never head of a torque wrench/copper grease.cant blame the car for this
and the gearbox had to be changed but it wasnt a major hassle
looking through the service history the car up to 57k when the original engine failed was given a engine flush with every oil change........
the car has been super reliable using no liquids between servicing and i have never had to take it to my mechanic for anything else other than mentioned so i wouldnt say its been un-reliable
i think i am going to save for a rebuild and go for a stroker..........if im going to do it im gonna do it properly.
what do you think of the graphs?
-i had to replace the original turbo after 98k it was goosed-these dont last forever
-the brakes gave me a nightmare as the persons that fitted them had never head of a torque wrench/copper grease.cant blame the car for this
and the gearbox had to be changed but it wasnt a major hassle
looking through the service history the car up to 57k when the original engine failed was given a engine flush with every oil change........
the car has been super reliable using no liquids between servicing and i have never had to take it to my mechanic for anything else other than mentioned so i wouldnt say its been un-reliable
i think i am going to save for a rebuild and go for a stroker..........if im going to do it im gonna do it properly.
what do you think of the graphs?
But the above shows it's had a hard life and been driven to death or not warmed and cooled properly, a turbo and box replacement under 100k? Loads of cars have gone past that.
Fair enough it's got the service history but as you've just seen it means jack at this present time. And are you sure it's had a sti bottom end rebuild at power station, I know you have receipt but have you had a good look at the actual part? Just the brake tourque problem shows a incompetent mechanic or owner, so who knows the rest.
Onwards and upwards fella
Sorry about your luck fella.
But the above shows it's had a hard life and been driven to death or not warmed and cooled properly, a turbo and box replacement under 100k? Loads of cars have gone past that.
Fair enough it's got the service history but as you've just seen it means jack at this present time. And are you sure it's had a sti bottom end rebuild at power station, I know you have receipt but have you had a good look at the actual part? Just the brake tourque problem shows a incompetent mechanic or owner, so who knows the rest.
Onwards and upwards fella
But the above shows it's had a hard life and been driven to death or not warmed and cooled properly, a turbo and box replacement under 100k? Loads of cars have gone past that.
Fair enough it's got the service history but as you've just seen it means jack at this present time. And are you sure it's had a sti bottom end rebuild at power station, I know you have receipt but have you had a good look at the actual part? Just the brake tourque problem shows a incompetent mechanic or owner, so who knows the rest.
Onwards and upwards fella
On a Newage WRX you will need a Newage Sti ecu at the least to run it as the WRX one doesn't have the function, Not too difficult after that, If you still have the TGV wiring they us that and add an additional 2/3 more to the ecu I did it on my last scoob, Bad luck BTW but that's modding for you love it or hate it
Jura
Last edited by The Pink Ninja; Jun 7, 2013 at 04:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post