Dan,sorry to hear the news, hopefully it will not be too bad.
Let me know if I can help and return the favour you did for me.
We will see you again soon tearing up the streets!!

 

Thanks guys.

Now now frayz, wouldn't want to be embarissing you would I?

Peedee - Paul @ extreme has worked on my car since I got it so ill speak to him first.

Ed - you can come and rebuild it if ya want? Seems like a fair return favour to me.

Matt - I've actually got a 2.0 block in the garage, could have a 2.1 built up. Not too sure if ill miss the torque from the 2.5 though

 

I have an engine from my 1/18 scale impreza, can fit that and give you the remote control!
Seriously let me know happy to help and get my tools out.

 

Embarrass away Dan, I've nothing to be embarrassed about

 

Damn you and your reverse psychology pier pressure

 

Dan I think Frayz is challenging you, obviously you 'll do the right thing

 

Seriously, I'd stay 2.5 and get the block worked properly.

Certainly the least amount of messing about for you. You have 2.5l heads with 99.5mm combustion chambers. They suit the 2.5 best or will work on a 2.35. But staying 2.5 is the most cost effective. Personally I'd add some proper rods, pistons, bearings etc. new oil pump, timing belt, head studs and add an SC46. You will have a very responsive and torquey 500bhp motor.

 

Really?

 

You may even keep up with me with the above

 

I made white wee wee reading that. Would need to pin the block if I go for that power?
Tbh I was going to leave the rods as I'm not looking at much above 400. Trouble is when I do things I do them with no expense spared and waving 500 stallions in front of my face is not good for my ego!!!
And the rest. Even frayz can't keep with ya on his 8th map!!

 

I was thinking about the .25 engine from my rc buggy. Think of the weight saving

 

Thing is Dan, if you do the rods and pistons then you know it's future proof.
I'd be looking for a solid 450+ spec car and you can sleep knowing its going to be okay.

 

Do it do it do it do it!

 

+1

 

On the shopping list

Pistons
Rods
Big end and main acl bearings
11 oil pump
Water pump
Oil modine
Cosworth timing belt

And because I'm a bling tart...

CDF red lightweight pulleys.


Already have head studs and exedy clutch

Will access the crank when it's out

Once build is complete and I gain more funds ill be investing in

BIG injectors
Oil cooler
And most likely a sc42 turbo and ill most likely be maxing out on the top mount ic.

 

Sounds like a good start Dan, for a road car 400/400 in a newage is plenty.

You'll struggle to use more. But I promise no matter how much you have, you'll want more.
I still want more, so if you're doing a build, then may aswell do the right groundwork from the outset.
Then it's just a case of bigger blower and more fuel

 

Sounds like you also need...........to start a project thread

You know full well she's going to be pretty amazing in no time at all.

 

Haha commence project....

BABY BOMBER!!!!!

 

Good luck