prodriverules

iTrader: (52)

I have no need to answer your question Dylan.

So your claiming that someone worked on the car after you and went about removing the pipe protection to leave it in a position to fail.....ok that's enough said I think lol

DYL 4N

You can't answer it because you don't understand or you just wanted to cause this on an open forum?

The fact you are aiming this at me offends me. The car has been away from me for two/three years. I don't know what's happened to it since then.

I think you should get on the American forums and show them the error of their ways, when it comes to fitting these sandwich plates.

Seen a few on there in the engine build threads. Maybe we are all wrong.

And you are right, if you understand the principle of it??

Cannon Fodder

iTrader: (100)

I haven't stated anything, I just want to get on and get the car sorted, there are issues that I could have brought to the fore previously but I have chosen not to bring out for public consumption.

I am not one to dwell on problems, I prefer to get them sorted and move on, learn a lesson and make sure they aren't repeated.

As for the issue of the oil cooler lines they have not been touched, removed, remounted, re-routed since they were fitted so I am at a loss as to where any protection would have gone?

I don't want this thread to be turned into a public slanging match, if that happens then I will ask for the posts to be removed and the thread locked until such time as the car is completed and then I will update the thread.

DYL 4N

Why did he have a grudge against me? He doesn't know me personally only what someone has told him.

I didn't want it to get to this either I bit my tongue until his last post edit.

Like I told you before if you had issue why not speak to me about them. You still have my phone number.

Good luck with the build and the future but I will defend myself if I feel that I am having unfair press.

Ryan, peace out and keep up the good work.

prodriverules

iTrader: (52)

I think you should read my post again as no name/s were mentioned only the findings

prodriverules

iTrader: (52)

I have no grudge against you Dylan nor do I judge a man on hear say,only what I see with my own eyes.

DYL 4N

It's in the welsh section. Everyone using the welsh section knows the history.

Enough said.

Keep up the good work.

Silver Scooby Sport

iTrader: (15)

No need to lock it Ty but if you would like a few bits removed then I'm happy to do so, we are all interested to watch things progress with the car here be a shame to loose sight of the plan evolve.

Cannon Fodder

iTrader: (100)

No that is okay Simon, it would seem to have calmed down and I hope that it stays that way.

I should have some more goodies arriving tomorrow and the day after, and so as they as onwards and upwards.

Silver Scooby Sport

iTrader: (15)

Ok cool well you know how to get hold of me anyway.... Your postman must have you red flagged at the office

prodriverules

iTrader: (52)

My opologies Simon I wasn't pointing fingers merely posting what i find which is why I won't get into a debate about it on here.

Cannon Fodder

iTrader: (100)

Let's put is this way the Royal Mail, DHL, TNT, Hermes, Citylink and Interlink all know who I am when they want something signed for.

Silver Scooby Sport

iTrader: (15)

No need for apologies Ryan at all the forum world can get a little hot at times and I know the subject a little I was just being diplomatic and helpful here myself for everyone

Have you got a parking space with Ty's name listed on it yet as we know he a man that like to mod all to well

Silver Scooby Sport

iTrader: (15)

Not if you have not ordered anything for a few months Ty as they will hardly recognise you there

Don't worry I have mobile numbers for TNT and FedEx plus I used to for UPS until they moved depot I text them when I have a parcel on route and they bring it to me... I know them all through work and they text me back asking where I want it dropped off to

prodriverules

iTrader: (52)

Yeah Ty's car has its very own space.....in the 'park it up,it's fooked,line

prodriverules

iTrader: (52)

It's a little joke we have when he comes to visit

Cannon Fodder

iTrader: (100)

I'll give you a kick in the buttocks the next time I'm up there, we all know that parking space is the one for cars for the scrappy to pick up.

And next time you can provide the refreshments, before long KFC in Hereford will be asking if I want a loyalty card and discount.

prodriverules

iTrader: (52)

Ill pay for your salad this weekend darling no problem

prodriverules

iTrader: (52)

Pipes all welded up,just need to prep them along with inlet manifold and give them all a coat of crinkle red

Cannon Fodder

iTrader: (100)

There's always a first time for everything.

That's looking really good, I can't wait for the waste gate chatter to begin.

redwards

iTrader: (6)

Well that looks a lot different since the last time I seen it!! Nice to see things progressing with all the hard graft you're both putting in.

GIBZY

iTrader: (4)

Don't inflate his ego Rich. Ty makes the tea and brings biscuits. Its Ry who does all the graft

Looking good there guys. Can't wait to see the big unvealing....again!

Cannon Fodder

iTrader: (100)

Thanks Rich, yes it is coming together nicely just waiting on one more item to arrive from the USA and that (hopefully) should be it on the parts.

I did actually make the tea last Saturday but no I didn't bring any biscuits, so you are wrong again.

As for graft, hmmm I have to earn the money to spend it but Ryan does the graft and I do the planning.

It will still be a while before it's ready as it had to go down to Enginetuner for the mapping but it is getting closer.

DannyBoy007

iTrader: (7)

Coming along nicely Ty. Nearly there

A couple of shocking pics there though,

I thought it was bad practice to remove the standard oil cooler as this would work whilst the car is sat in traffic/slow moving traffic.

Cannon Fodder

iTrader: (100)

Thanks Danny, I'm looking forward to getting it mapped and then the drive back.

prodriverules

iTrader: (52)

So Ty made another visit today with loads of goodies in hand which consisted of
New oil modine+retaining bolt


Titanium turbo blanket



Fuel rail adapter to enable FPR fitment

Water pipe with samco elbows to go onto modine

Bigger K+N filter to fit onto the CAIK kit


Filter sock

Perrin short shifter kit


Millers CFS nanodrive oil

IggyRB320

iTrader: (9)

Cracking read! Nice one Ty

Cannon Fodder

iTrader: (100)

Thanks, I hope it's all going to be worthwhile.

prodriverules

iTrader: (52)

It will all be great as long as this new tubby doesn't blow up your engine

Cannon Fodder

iTrader: (100)

Thanks for that, I'm nervous enough as it is.