Shaks-STI

iTrader: (7)

Looks amazing what you have done mate

prodriverules

iTrader: (52)

Thanks lads

Ricey-they are custom made mate

trails

iTrader: (41)

holy moly Ryan that does look good

mickywrx

iTrader: (29)

Have you just drilled and tapped the manifold for the throttle cable retainer, Ryan?

In this pic;



Build keeps getting better and better, mate.

prodriverules

iTrader: (52)

Cheers Ian
Micky-It's a 8mm thick piece of alloy that has been welded on to which I tapped it with a 6mm thread mate

mickywrx

iTrader: (29)

Cheers Ryan. food for thought mate.

prodriverules

iTrader: (52)

Stopped on tonight to get the boost lines finished off as Alex had sent down the hose and unions needed to do them.
Tim also sent down a new stainless oil pressure switch along with another temp sensor as I pinched the oil one to have a union adapted by Alex for fuel temperature plus he also now stocks MAP sensors with 1/8th thread which came in very handy for adapting for AN unions.
Big thanks going out to both for sorting the items
Pretty much par putting the injectors into the rails I'm ready for the wiring to commence,Tim emailed to say the mil spec connector for the bulkhead is on route so once it lands I can get it mounted in the bulkhead and Tim can then come and work the magic!!
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

Cannon Fodder

iTrader: (100)

I wish you would clean under your nails young man.

Hurry up and finish this, just so I can embarrass you.

prodriverules

iTrader: (52)

Some of us have real jobs that require more than sitting at a computer and driving a van 'old man'

Embarrass my ****,you'll be not only left for dust but over shadowed at all the shows

Cannon Fodder

iTrader: (100)

Some people think for a living, meanwhile others just do as they're told...

It will be hard for people to see it once it's parked next to the rubbish bin and beside the gazebo, at the back of the stand.

Silver Scooby Sport

iTrader: (15)

Looks great Ryan... There's a lot of bespoke mods going on with this car no wonder it is taking so long to finish off

prodriverules

iTrader: (52)

Cheers Si,yes it soaks up time for fun when it's all custom!

Calipers are in the prep stage at last mate

Silver Scooby Sport

iTrader: (15)

Yes custom is the way to go if you have the opportunity, plus you can refine areas right up to date.... We forget its 10 year plus technology on the classics.

In prep great to hear feel free to add pics on my thread.

prodriverules

iTrader: (52)

Quite right Si,there has been plenty of area's where I felt it just couldn't be left as it was,just wish I had more spare time!!

I'll add some pics no worries

BLU

iTrader: (27)

This is just epic, can't wait to see it finished!!

JonMc

iTrader: (51)

Now you can hand your woes onto someone else to do something and we should here less of this premadonna like break it or finish it rubbish - just need that final push now

Hammer man

iTrader: (25)

Ooh thats a "low punch" if ever I`ve seen one.

prodriverules

iTrader: (52)

It's ok cliff,Ty will pay for that comment and he knows it

g.pain

Had the pleasure of seeing ryans car in the flesh today. WOW amazing
attention to detail is unreal.
Thanks for showing me round it ryan

prodriverules

iTrader: (52)

My pleasure Allan,glad you liked it mate

Big thanks to Tim for getting the Mil spec connector sorted and down to me,tomorrow's job is getting the hole cut into the bulk head for it.
Big thanks to the metal master for coming over this morning and making a start on the IC pipes,the IC to throttle body is all cut and ready for welding but after Matt starting to route the turbo to IC he decided that cutting the pipe on the IC for a smoother run would be a better option we stopped play on that,going over Monday evening so he can modify it while I wait.
While he was at the workshop he made a cardboard template for a washer bottle to be mounted in the boot plus templates for the brackets to retain the top of the IC.

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

mickywrx

iTrader: (29)

Looking good.

Get a wiggle on get it finished.

Silver Scooby Sport

iTrader: (15)

Great pipe work... Simples

prodriverules

iTrader: (52)

Went down the workshop with the intention of cutting the hole for the mil-spec connector but found I don't have a hole cutter of the right size so that stopped play on that so I got to work on the rest of the wiring for the O/S headlight and the loom running across the front of the lower slam panel,I've been holding off on this as I hate wiring lol but it's almost done,got the rivnuts in place to retain the little anodised brackets I went and got from Alex at Torques this morning[got done for speeding on my way which pi55ed me off but hayho].
Just need to finish up the wiring for the N/S side light and join up the wiring for the washer pump plus run the EGT sensor wire across to the N/S where it will go into the cabin area through the A-pillar.
I also swapped out a few other brackets in the bay along with coupling up all the boost lines as one to stop them jiggling about.

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

JonMc

iTrader: (51)

Those clips look good, I've thrown a couple of black ones on my coolant hoses but could improve my wiring no end with some more

prodriverules

iTrader: (52)

Big thanks going out to the metal master Bennet,as per usual he's pulled the stops out and not only modded the IC to perfection but he had the washer bottle and top IC pipe to throttle body waiting for me when I landed,you the man chap cheers.
The washer bottle is contoured to fit the inner wheel house and fits perfectly in position as does the IC pipe which while just resting in the silicone hose on the IC is smack on inline with the throttle body!
Pics say the rest.....
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

JonMc

iTrader: (51)

Looks really well put together, now the washer bottle in the boot is a trick idea, but I've already finished the routing for the pipework - I have my own twist on that anyway

BLU

iTrader: (27)

wow

prodriverules

iTrader: (52)

Had a little message from Martyn at ET today offering up a little more bling for the engine bay which also serves a good purpose,uprated Turbo Technics actuator for the Billet S206 blower,billet body and anodised blue and being the tart I am I couldn't say no lol.
It was a massive coincidence as I was only thinking over the weekend about how I could make the standard one look better!!
Big thanks mate
[IMG][/IMG]
[IMG][/IMG]

M2RTXhawkeye

iTrader: (61)

When's my car coming yours Ry for a make over honestly this is going to be the best car on Scoobynet Ry no doubt about it

Martin

prodriverules

iTrader: (52)

Cheers Martyn,I hope it ends up as good as everyone is thinking!!

Big thanks again to the metal master for coming over this morning and mocking up the turbo to IC pipe and the custom inlet pipe for the turbo which needed a reducer from 80-70mm and once complete and worked over by Matt will look sick,I couldn't happier.
The pipe for the IC is so clean and short it's unreal tbho!!

[IMG][/IMG]
[IMG][/IMG]