'HTAutos' ,What would you like us to Manufacture??
#61
Scooby Regular
Join Date: Jul 2009
Location: north lanarkshire near glasgow
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
wrx wing spoiler risers
hi would like wrx wing risers at aresonable price im haveing to buy mine from the state s havent placed an order yet but if you did them would def buy from you there for a 2002 bugeye sti
Last edited by spacer567; 06 May 2010 at 10:02 PM. Reason: more info
#70
v5/6 front splitter in PU
Can't believe we've got to page three and nobody has asked for one of these. The Subaru ones are flippin' expensive and the only other one I can find is on ebay and the quality is poor.
I would love to see this slightly modified so the bottom edge is parallel to the floor. I think the P1 splitter is too big but the v5/6 could do with being a little larger.
Something in between would be great - by the end of the month will be fine
I would love to see this slightly modified so the bottom edge is parallel to the floor. I think the P1 splitter is too big but the v5/6 could do with being a little larger.
Something in between would be great - by the end of the month will be fine
#71
Former Sponsor
Thread Starter
iTrader: (24)
Join Date: Jan 2009
Location: Hyde Manchester
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
Can't believe we've got to page three and nobody has asked for one of these. The Subaru ones are flippin' expensive and the only other one I can find is on ebay and the quality is poor.
I would love to see this slightly modified so the bottom edge is parallel to the floor. I think the P1 splitter is too big but the v5/6 could do with being a little larger.
Something in between would be great - by the end of the month will be fine
I would love to see this slightly modified so the bottom edge is parallel to the floor. I think the P1 splitter is too big but the v5/6 could do with being a little larger.
Something in between would be great - by the end of the month will be fine
#73
Ok, lets see if I can describe this so it makes some degree of sense.
What I like about the V5 is that it follows the line of the side skirts along the top edge . . .
. . . . but I don't like the way the bottom edge goes up towards the front of the car. (if you look at the side it looks like a wedge)
I would prefer that the bottom edge is parallel to the top edge and the ground, this would make the front edge lower, abit like your V-Ltd one.
I would however like the front to take in the air ducts and the sides like the V5.
If I knew how to do 'photoshop' I'd have a go at creating a drawing but I'm afraid I don't.
Clear as mud??
Hopefully this gives you an idea what I'm talking about - if it's any consolation I know what I mean
PU would be the way forward as well IMO
What I like about the V5 is that it follows the line of the side skirts along the top edge . . .
. . . . but I don't like the way the bottom edge goes up towards the front of the car. (if you look at the side it looks like a wedge)
I would prefer that the bottom edge is parallel to the top edge and the ground, this would make the front edge lower, abit like your V-Ltd one.
I would however like the front to take in the air ducts and the sides like the V5.
If I knew how to do 'photoshop' I'd have a go at creating a drawing but I'm afraid I don't.
Clear as mud??
Hopefully this gives you an idea what I'm talking about - if it's any consolation I know what I mean
PU would be the way forward as well IMO
#74
Please please please can you make a copy of the WRC spec carbon mirrors! I love the style just not the price and would want them body colour anyway! Is there any way you can?
http://www.japspeed.co.uk/uploads/im..._large/410.jpg
http://www.ndrrallying.co.uk/userimages/DSC03194.JPG
http://www.japspeed.co.uk/uploads/im..._large/410.jpg
http://www.ndrrallying.co.uk/userimages/DSC03194.JPG
Last edited by Dspeed; 17 May 2010 at 09:17 PM.
#76
Scooby Regular
iTrader: (30)
Join Date: Dec 2005
Location: leicester
Posts: 3,508
Likes: 0
Received 0 Likes
on
0 Posts
Ok, lets see if I can describe this so it makes some degree of sense.
What I like about the V5 is that it follows the line of the side skirts along the top edge . . .
. . . . but I don't like the way the bottom edge goes up towards the front of the car. (if you look at the side it looks like a wedge)
I would prefer that the bottom edge is parallel to the top edge and the ground, this would make the front edge lower, abit like your V-Ltd one.
I would however like the front to take in the air ducts and the sides like the V5.
If I knew how to do 'photoshop' I'd have a go at creating a drawing but I'm afraid I don't.
Clear as mud??
Hopefully this gives you an idea what I'm talking about - if it's any consolation I know what I mean
PU would be the way forward as well IMO
What I like about the V5 is that it follows the line of the side skirts along the top edge . . .
. . . . but I don't like the way the bottom edge goes up towards the front of the car. (if you look at the side it looks like a wedge)
I would prefer that the bottom edge is parallel to the top edge and the ground, this would make the front edge lower, abit like your V-Ltd one.
I would however like the front to take in the air ducts and the sides like the V5.
If I knew how to do 'photoshop' I'd have a go at creating a drawing but I'm afraid I don't.
Clear as mud??
Hopefully this gives you an idea what I'm talking about - if it's any consolation I know what I mean
PU would be the way forward as well IMO
am looking for the same thing , like the sides of the v5 and the front of the v ltd one ... i have been so close in buying the v-ltd one so many times but the sides of them look shocking just dont look right .
think the v5 needs to be deeper at the front
#77
Former Sponsor
Thread Starter
iTrader: (24)
Join Date: Jan 2009
Location: Hyde Manchester
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
Ok, lets see if I can describe this so it makes some degree of sense.
What I like about the V5 is that it follows the line of the side skirts along the top edge . . .
. . . . but I don't like the way the bottom edge goes up towards the front of the car. (if you look at the side it looks like a wedge)
I would prefer that the bottom edge is parallel to the top edge and the ground, this would make the front edge lower, abit like your V-Ltd one.
I would however like the front to take in the air ducts and the sides like the V5.
If I knew how to do 'photoshop' I'd have a go at creating a drawing but I'm afraid I don't.
Clear as mud??
Hopefully this gives you an idea what I'm talking about - if it's any consolation I know what I mean
PU would be the way forward as well IMO
What I like about the V5 is that it follows the line of the side skirts along the top edge . . .
. . . . but I don't like the way the bottom edge goes up towards the front of the car. (if you look at the side it looks like a wedge)
I would prefer that the bottom edge is parallel to the top edge and the ground, this would make the front edge lower, abit like your V-Ltd one.
I would however like the front to take in the air ducts and the sides like the V5.
If I knew how to do 'photoshop' I'd have a go at creating a drawing but I'm afraid I don't.
Clear as mud??
Hopefully this gives you an idea what I'm talking about - if it's any consolation I know what I mean
PU would be the way forward as well IMO
Sort of know what u mean
#79
Scooby Senior
iTrader: (51)
Join Date: Nov 2005
Location: Wherever I park my car, that's my home
Posts: 20,491
Likes: 0
Received 2 Likes
on
2 Posts
Any news on the bugeye fog covers?
What about modding your wide-arch kit so it is vented at the rear of the arch, escort cosworth style if you get my drift
What about modding your wide-arch kit so it is vented at the rear of the arch, escort cosworth style if you get my drift
#81
(photoshop)
I think the gaps should be left alone. Just continue the line in the side of the spoiler throughout and make it more level.
It does look great...more aggressive stand.
Last edited by Poechi; 18 May 2010 at 10:33 AM.
#82
Thanks for that Poechi, that's getting there. Ideally, if I'm not getting too particular, what I'd like is the modified sides of the v5 and round to the lower grill where it will then merge into the V-Ltd lip under the existing bumper line. This may even leave a gap which could like cool.
Here we go - found this - lets throw this into the mix.
Last edited by Paucatuman; 18 May 2010 at 11:20 AM. Reason: found piccy