'HTAutos' ,What would you like us to Manufacture??
Hi,
After much investment in machinery, i was wondering what products you want us to manufacture? We have several different ways of production, so most styling parts can be accomodated! Methods we now have; Hand lay Fibreglass ( Large parts) Injection moulded PU Plastic ( Splitters etc) Vacuum Forming ( Fog cover, diffusers etc.) and now, Urethane self skining Foam ( Spoilers etc.) Please list parts, and the ones we think will sell, we will put into production!!! Thankyou for you time. Cheers, Mark @ HTAutos:thumb: |
carbon fibrewheels. could that be done
|
I would be very interested in a P1 replica back wing... they look the best in my opinion.
|
Originally Posted by seddomyster
(Post 9380348)
carbon fibrewheels. could that be done
|
Originally Posted by Poechi
(Post 9380360)
I would be very interested in a P1 replica back wing... they look the best in my opinion.
Mark:thumb: |
Bugeye 'prodrive style' front bumper and fog covers.
Bugeye STI front grille or JDM grille Bugeye sti scoop fits forester too i think you used to do these?? Air ducting to replace fog lights - all models |
Wing Stiffis
|
Good quality pods
|
Blobeye STI winglets to fit WRX.
Front foglight covers for Blob WRX |
Hawkeye reverse bonnet scoop
Perrin style wing 'stiffies' |
Also would like to see a good quality P1 spoiler if you need a car to test it on im just down the road :thumb: lol
|
Can you do 'A' pillar interior trims for newages with built in gauge pods suitable for 60mm gauges? :wonder:
I have tried one from another manufacturer but the finish was not too good and cracked. :( |
Some kind of step up adaptor ring, so I can fit 3 X 52mm gauges in a 60mm pod!
No one in the world seems to make it & its only a ring of plastic!! |
Blob eye reverse bonnet scoop for me :)
|
As per the other thread, the lower half of this in something quite light:D
http://img.photobucket.com/albums/v5...UIP04RW-TB.jpg http://img.photobucket.com/albums/v5...4RW-TB__4_.jpg I'll have the first one:thumb: |
Originally Posted by rickya
(Post 9380420)
Some kind of step up adaptor ring, so I can fit 3 X 52mm gauges in a 60mm pod!
No one in the world seems to make it & its only a ring of plastic!! I'll have a check for you. |
A bit more 'OTT' rear diffuser, like the Time Attack guys are running
|
Originally Posted by Cannon Fodder
(Post 9380462)
I may have three from when I fitted an ATI pod, I'm sure it came with 52mm rings.
I'll have a check for you. |
Reverse bonnet scoops/vents for early classic, I know you do one but it looks a bit pants to be honest :) something nice and plain/small.
|
Originally Posted by bigvern
(Post 9380380)
Air ducting to replace fog lights - all models
|
And something like these please for classic Impreza (don't have to be carbon though).....
http://www.lancerregister.com/showth...irt+extensions ..... and some skirts like these (to put the above onto)..... http://www.autospecsltd.com/RIMG0242.jpg |
Getting some really good ideas now:norty: keep em coming:luxhello:
Cheers, Mark.:thumb: |
|
You having a skirt fetish Moley:D
|
Im after a decent looking fog light cover air duct on drivers side. (bugeye sti jdm):idea:
|
Originally Posted by Moley_WRX
(Post 9380470)
A bit more 'OTT' rear diffuser, like the Time Attack guys are running
http://i5.photobucket.com/albums/y17...DSC_0077-1.jpg http://i5.photobucket.com/albums/y175/VTRgary/_1.jpg http://i5.photobucket.com/albums/y175/VTRgary/_2.jpg http://i5.photobucket.com/albums/y175/VTRgary/_4.jpg http://i5.photobucket.com/albums/y17...s2fsubakx0.jpg I would buy one if you made it Or even something simple like the bit around the exhaust http://i5.photobucket.com/albums/y175/VTRgary/pair2.jpg |
Originally Posted by Cannon Fodder
(Post 9380491)
I have 3 x 52mm rubber rings so that you can fit 52mm gauges in a 60mm pod if you want them FOC. :)
|
Here's a bit of a strange one:
On ebay & everywhere you get non original oval grill badges. These can be made up in any design & look good but don not stick into grill properly. They are flat vinyl approx 2mm & not like OEM hard plastic domed that click into the grill & has a outer plastic rim for clicking in. If you could make a plain black plastic domed blank grill badge that clicks into place but has a smooth recess of approx 2 to 3mm in which you stick your vinyl personalised design that would solve the problem non OEM grill badges looking naff ! https://i31.photobucket.com/albums/c...g?t=1272726031 |
Originally Posted by rickya
(Post 9380692)
Cheers mate, let me know how much &Il send you payment through paypal gift :)
|
Your a star mate :)
Let me sort you out for postage or a pint or sumit! |
All times are GMT +1. The time now is 12:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands