Impressive mate, what other mods

 

http://thrll.com/car/2004-subaru-impreza-12488

 

Still running standard block Harry?

 

No, I didn't mean any graphics... Just that it was coincidence that it made 555 - a la the BAT cigarettes sponsorship.

 

That's good power on pump fuel jura well done mate, is that with a .63 or .82 back housing ?, and what was the bhp at wheels mate ?

 

An educated ATW guess would be 440 bhp on the nose.

Well Jura...?

 

Thanks there

We are running .63AR housing,not sure what power is on wheels,but if Subaru transmission loss is 16% then from this figure(555bhp) 16% is 88.8bhp and ATW should be around 466.2WHP

But for sure I will try speak with Charlie@SRR

Jura

Not sure Joz as above I've posted,but hopefully someone will correct me if I'm wrong

If 16% is transmission loss on Subaru then ATW figure is around 460WHP

Jura

 

My guesstimate was based on, specifically, 20.79% (lol!) tranny/friction losses.

This is what I got when mine was mapped on Scooby Clinic's DD.

 

You should have an atw print out Jura

 

Thanks Joz,I was just assume Subaru transmission loss is around 16%

20.79% is more than I've expected,but still if those figures we apply,555bhp should be around 440bhp


Jura

Hi Simon

We don't have ATW/AFR prinout,we have only those two printouts

Jura

 

Yeah, so many variables, though.

IRO c.16% is prob more indicative of a 2WD drivetrain(?)

 

Hi, out of interest what are the main differences between an SC GT30 billet and a garrett GT30 billet please?

 

The Garrett unit uses an 11 blade compressor wheel of their design, the Scoobyclinic Billet 30 uses a 6 blade comp wheel of their design.
From my brief experience of the Garrett wheel it spools slower than the Blouch 63mm version but makes slightly more power. I also have a 65mm Blouch version fitted to a 2.35 that is nearing completion so I'll post the results for that here.

As an aside I'm currently waiting on a new GTX3582R turbo for my drag car which will replace the older GT35/42R so I'm excited to see what it'll do.
I'll post those results elsewhere so as not to dirty Kev's excellent thread up !

 

Nice 1 Martyn im looking forward to seeing the results of both those turbo`s,especially the new GTX3582R ,please keep us posted matey.

 

what is the differance with the gt35xtr and the gt35r

 

Kev, I know you now do a Billet version of the SC40..... But do you also do a genuine TWIN SCROLL (not twin entry) version of the same turbo?! (I can't remember, sorry).

 

Pretty sure they don't do the SC40 anymore and only offer the SC42?

 

Still listed on their site:-

http://shop.scoobyclinic.com/index.p...product_id=467

But it doesn't look like there is a TS version of it, regardless.


No worries though; If I were to go TS, I would invariably get a SC42 anyway.

 

give him a bell mate is the best bet, the turbo's are always under development so do change.

 

They do

 

I must admit I thought Kev did say it was being deleted, because the 38 and 42 rendered it obsolete(?)

But yeah, it's still listed on their site, regardless.

 

Indeed, I will (should I go for it).

 

just change the search options
http://shop.scoobyclinic.com/index.p...product_id=137

 

Yeah I know there is a TS SC42.

I wanted to know if there was a a TS SC40.


But no bother, I'd get the 42 anyway.

 

I wouldn't necessarily rely on the web to demonstrate that something is conclusively correct, always revert to phone if yer unsure.

 

Sure sure - I will (if I go for it lol).

 

kev any chance of letting me now

 

i just finish to read this thread.....9 days.....lol but interesting....

 

Thread (not post).

 

Any chance of a Xmas discount on an SC38