Newage twin scroll turbo 650 bhp front turbo project
If its about general banter and info then i don't mind who is posting what but it's a slagging match then i'm having none of it.
Duncan
Progress has been very slow of late and i just managed to get hold of a custom sized rad today.Its not the usual alloy one but its made from a copper core iirc.Are these units good or bad?
As from now the garage has both the rad and fmic,work will commence at the earnest and will get pics posted as soon as poss.

Duncan
Progress has been very slow of late and i just managed to get hold of a custom sized rad today.Its not the usual alloy one but its made from a copper core iirc.Are these units good or bad?
As from now the garage has both the rad and fmic,work will commence at the earnest and will get pics posted as soon as poss.
Scooby Regular
iTrader: (11)
Joined: Nov 2007
Posts: 1,081
Likes: 3
From: 2.1cdb, gt30 billet, syvecs
Scooby Regular
iTrader: (12)
Joined: Jun 2007
Posts: 3,734
Likes: 0
From: 700+ WR1 aka The Vuvu Zela...10.6 @ 136 weighing 1370kg....say no more....

Peter - Ducan is right, sorry to hijack your thread m8. I for one cannot wait to see the end result of your build. I think Andy H's turbo talk/power output has certainly given food for thought to all. In the meantime any new pics of on your build?
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next
More pics of the cooler....i would show you the core insider the cooler but that would be letting you see something that is for my eyes only


The copper rad that we got made up by East End Radiator in Glasgow.



Will be mounted soon and will need some fairy dust to get it going

The copper rad that we got made up by East End Radiator in Glasgow.
Will be mounted soon and will need some fairy dust to get it going
Last edited by Fai17; Aug 20, 2009 at 04:31 PM.
Scooby Regular
iTrader: (12)
Joined: Jun 2007
Posts: 3,734
Likes: 0
From: 700+ WR1 aka The Vuvu Zela...10.6 @ 136 weighing 1370kg....say no more....
i hope so mine engine should be started soon 
i was in andys car yesterday peter doing a bit of work on it and i was very impressed how the turbo spooled it was only taken to 5000 rpm and not even mapped (running low boost)and it felt awesome so your twin scroll should be amazing
does anyone want to buy a gt3542

i was in andys car yesterday peter doing a bit of work on it and i was very impressed how the turbo spooled it was only taken to 5000 rpm and not even mapped (running low boost)and it felt awesome so your twin scroll should be amazing

does anyone want to buy a gt3542
Scooby Regular
iTrader: (11)
Joined: Nov 2007
Posts: 1,081
Likes: 3
From: 2.1cdb, gt30 billet, syvecs
i hope so mine engine should be started soon 
i was in andys car yesterday peter doing a bit of work on it and i was very impressed how the turbo spooled it was only taken to 5000 rpm and not even mapped (running low boost)and it felt awesome so your twin scroll should be amazing
does anyone want to buy a gt3542

i was in andys car yesterday peter doing a bit of work on it and i was very impressed how the turbo spooled it was only taken to 5000 rpm and not even mapped (running low boost)and it felt awesome so your twin scroll should be amazing

does anyone want to buy a gt3542

i can get you the same spec turbo as me for 820 quid delivered mate
or i can get you a turbo same spec as andy gallagher for 880 quid
cam timing, who invented adjustable pullies, its a feckin mine feild
thanks again neil, you can try my monster fmic on your when your ready
andy h
Scooby Regular
iTrader: (12)
Joined: Jun 2007
Posts: 3,734
Likes: 0
From: 700+ WR1 aka The Vuvu Zela...10.6 @ 136 weighing 1370kg....say no more....
i hope so mine engine should be started soon 
i was in andys car yesterday peter doing a bit of work on it and i was very impressed how the turbo spooled it was only taken to 5000 rpm and not even mapped (running low boost)and it felt awesome so your twin scroll should be amazing
does anyone want to buy a gt3542

i was in andys car yesterday peter doing a bit of work on it and i was very impressed how the turbo spooled it was only taken to 5000 rpm and not even mapped (running low boost)and it felt awesome so your twin scroll should be amazing

does anyone want to buy a gt3542


Sounds like Andy H's car's bloody good.
I have been in an evo with a t04z turbo fitted and I thought it was good and faster than mine due to sitting in the passenger seat, when I drove mine in anger the next day I didn't think it was that much better!
Scooby Regular
iTrader: (12)
Joined: Jun 2007
Posts: 3,734
Likes: 0
From: 700+ WR1 aka The Vuvu Zela...10.6 @ 136 weighing 1370kg....say no more....
Shawy - is your scoob at Chy's then? Mine is parked up on her own
in the right workshop. If you are using the same turbo as Andy's, it will be insane m8! Will your's be geared as a track, drag or daily driver?
Andy - when you looking at having your's finished off? Think I'm going to struggle with mine in getting a run on the drag strip due to further mods - hopefully should be able to catch one or two of the finals in Sept! Was speaking to Peter and we are going to aim to have both our's ready at the same time.
in the right workshop. If you are using the same turbo as Andy's, it will be insane m8! Will your's be geared as a track, drag or daily driver? Andy - when you looking at having your's finished off? Think I'm going to struggle with mine in getting a run on the drag strip due to further mods - hopefully should be able to catch one or two of the finals in Sept! Was speaking to Peter and we are going to aim to have both our's ready at the same time.
No my car is being built at home chy is doing the engine build ,
i dont think mine will be finished until christmas as chy hasnt got the parts for ther engine yet . i will be using the car for scoobysprint and time attack .
Andys car should be ready midweek fingers crossed
if i dont blow it on a test run
i dont think mine will be finished until christmas as chy hasnt got the parts for ther engine yet . i will be using the car for scoobysprint and time attack .
Andys car should be ready midweek fingers crossed
if i dont blow it on a test run
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next
i hope so mine engine should be started soon 
i was in andys car yesterday peter doing a bit of work on it and i was very impressed how the turbo spooled it was only taken to 5000 rpm and not even mapped (running low boost)and it felt awesome so your twin scroll should be amazing
does anyone want to buy a gt3542

i was in andys car yesterday peter doing a bit of work on it and i was very impressed how the turbo spooled it was only taken to 5000 rpm and not even mapped (running low boost)and it felt awesome so your twin scroll should be amazing

does anyone want to buy a gt3542

My car....well i can't wait to get it running and i've been away fishing down at Rutland (Eyebrook) and it was great to away from the internet and SN madness

I will be popping to the garage to see what they have done in the last few days and will report back with a few pics
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next
Andy H has alot more power lower down the rev range and i would love a wee pax lap in his scooby

Wellone again Andy
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next

I will try me best to get the garage to get it ready for september but no promises mate
Scooby Regular
iTrader: (11)
Joined: Nov 2007
Posts: 1,081
Likes: 3
From: 2.1cdb, gt30 billet, syvecs
its not me that needs the praise thow
its my mapper edmy, i would advise anyone to give him a try, he is a genuine bloke and listens to what you want, and wont stop until he is 100% happy with his work. perfection
i will polish my passenger seat for you

andy h
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next
Scooby Regular
iTrader: (11)
Joined: Nov 2007
Posts: 1,081
Likes: 3
From: 2.1cdb, gt30 billet, syvecs
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next
No pics yet as there has been little progress because of various reason out of our contrl....new baby and such likes for the garage owner
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next





.....now don't go stealing any of mine!