Newage twin scroll turbo 650 bhp front turbo project
Scooby Regular
Joined: Jan 2006
Posts: 2,629
Likes: 3
From: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
DDWHP figure was 501.1hp, technical hitches at work have killed the ability to post the graph today.
On Sunoco MAXNOS race fuel we have seen as much as 706bhp from the 35/42R.
On Sunoco MAXNOS race fuel we have seen as much as 706bhp from the 35/42R.
Scooby Regular
Joined: Jan 2006
Posts: 2,629
Likes: 3
From: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
Different dynos for you Andy, fwhp figures seem to tally on similar cars but wheel figures are worlds apart.
Scooby Regular
iTrader: (11)
Joined: Nov 2007
Posts: 1,081
Likes: 3
From: 2.1cdb, gt30 billet, syvecs
pmsl. so what you two are trying to say is. dynos are b0ll0cks ?
a wheel figure is a wheel figure. i ran mine on area 52 dyno and made 602 hp and 523 atw. this was a dyno dynamics. jase will comfirm this.
i ran it on the dastek dyno and it made 603 hp and 525 atw.
the difference in temperature was a mere 3 degrees.
so this is living proof that a wheel figure is a wheel figure.
or am i just still living in a bubble
a wheel figure is a wheel figure. i ran mine on area 52 dyno and made 602 hp and 523 atw. this was a dyno dynamics. jase will comfirm this.
i ran it on the dastek dyno and it made 603 hp and 525 atw.
the difference in temperature was a mere 3 degrees.
so this is living proof that a wheel figure is a wheel figure.
or am i just still living in a bubble
This has been discussed time and time again, and commented on by people that have far greater frontal lobes than I have. 
If you ever want to get any meaningful comparisons, you are best advised to compare the runs on the same dyno at the same venue. From the perspective of someone that has spent 100's of hours on various dyno's, I speak from experience.

If you ever want to get any meaningful comparisons, you are best advised to compare the runs on the same dyno at the same venue. From the perspective of someone that has spent 100's of hours on various dyno's, I speak from experience.
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next
FW and ATW RR figures!!!
Who cares as long as its what you want from your car and it can perform
Now where is my graph
Who cares as long as its what you want from your car and it can perform

Now where is my graph
Last edited by Fai17; Aug 3, 2010 at 11:34 PM. Reason: spelling
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next
Right got the car down to Greersport this morning to get some prep work done for TOTB.
Out with the heavy oem seat and in with a pair of Recaros and Sabelt Harnesses


And set of much needed Gucciness
Out with the heavy oem seat and in with a pair of Recaros and Sabelt Harnesses
And set of much needed Gucciness
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next

8 1/2 x 17 et+44
Scooby Regular
iTrader: (24)
Joined: May 2009
Posts: 1,015
Likes: 0
From: STI V8 with 558bhp 580ft/lbs on V-Power (2.5 cdb)
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Jan 2008
Posts: 1,447
Likes: 0
From: MY 10s blobeye 10.87@132 2.35/TO4Z next
Scooby Regular
iTrader: (24)
Joined: May 2009
Posts: 1,015
Likes: 0
From: STI V8 with 558bhp 580ft/lbs on V-Power (2.5 cdb)








