Could be arranged but not for this Saturday I'm afraid.

Taking Samuel to Clacton. I had to endure it as a kid so he does as well

Still need to sort out the old man's van with you as well. He's gone full out on his own now.

When I removed mine I used warm water and gently cut the double foam tape with dental floss. The remaining glue residue was removed with warm water, rubbing and polishing.

Balsie, you have PM about the badges.

Well..quick update!

Car's been parked in the sun for the last 4 hours so nipped out and they all just flipped off with a finger nail!.... grabbed an alcohol wipe from my toolbox and all clean and tidy with no marks.

now trying to work out a witty sentence using the letters

S U B A R U I M P R E Z A

( and U R A BUS is not an option)

R U A BUS ?

best so far is PURE BRAWN (turning the M over to make a W, and one of the U's to make an N)

ha cheers Dunc!

Might be tempted as it's on the back...

Was looking for something less obvious!

PUBE WAR

Are you mixing up your threads Dunc...

surely that's from another "forum"

ok then SUBE WAR

PURE MAN might get you a few looks

pmsl..

latest (using all the letters)

REPAIR AS U BUM

or

BUM AS U REPAIR

lmao

Just got

PURE N RAW

I have seen one debadged completely (Subaru, Impreza Sti) and used the letters to have PTS in the corner where Sti was. His owner found it unique and I guess having a Powerstation upgrade package (330) it made sense

SIR BUMZ U A PEAR
Took me ages!! haha

Lee

Just spat my coffee

lol!

I used some dental floss believe it or not to remove my badges.

I heated up my badges (the Subaru and Impreza ones) with a hair dryer and they just pulled off. Used some lighter fluid on a rag to remove the glue left on the car

Looks much better IMO

Had some red stripe left so did a bit more, I'm not sure though

Arrggghhhh!

After a great track day at Castle Combe
http://www.youtube.com/watch?v=nmHciwl-ySA
I rushed to change my wheels over from track to road. The nuts were too hot to touch and I stupidly used my electric wrench to put the nuts on. All fine at the rear of the car, but awful at the front. Managed to strip both nut and stud thread on both fronts.

Subaru dealer is going t osplit the hubs and replace some studs on each side. Does anyone know what thread pattern the studs are? I need to find some dome nuts to replace my stripped (rubbish) nuts as I don't want this to happen again!

Demon Tweeks have these "19mm hex open ended head and M12 x 1.5 or M12 x 1.25 thread with a 60 degree tapered fixed seat". Question is will they fit? If not where can I get some nuts to fit the STi? The nuts that cam with the STi wheels are not deep enough.

Thanks

W

Scooby parts have some
12 X 1.25 thread with a 17mm hex head size
The 60 degree taper is fine but is the thread right?



W

So sorry to hear whats happened Mark, bit worrying all these engines going pop.

Ours went in a couple of months ago to have the map mod done by the dealer, they ammitted they had problems reflashing our ecu and when my trusty mapper ( Duncan) checked it the upgrade wasnt on there so we put it on our selfs.

Sorry we havent been on here for a while, busy with other things, will get some more photos up of Harry soon.


BTW, PMSL at the above acronyms

well I think that i have found the replacement

http://www.pistonheads.co.uk/sales/1680689.htm

Very tidy... not bad compared to the circa £32000 for a Type UK 330S !!

managed to win a prodrive b/box for £108 just now, bidding on c/section which is £10 at the mo

advice needed please guys, out for a drive this morning, 4th gear @50mph accelerate and the car starts making a really loud rough sucking noise. starts making the noise all the time. there is a burning smell as well. any ideas?

thanks

Luke

R205 looks very nice

Have you checked the black pipe that connects to the airbox, these have a tendancy to slip off the mounting and will wreck your fueling mixtures, IIRC you also will get a sucking noise.

just noticed the jubilee clip holding a hose on the turbo was really loose. tightened it back up but it popped off again within 10 mins.

I think Duncan recommended spraying the mounting point of the hose with hairspray and it sticks the hose in place.

Bought these a couple of weeks ago but following the engine failure I've lost heart in the car and serioulsy thinking of leaving scooby ownership

The ET35 will fit perfect for a HAWKEYE or HATCH STI filling the arches more but wont require any arch rolling.


Wheel Description:
Metal Type: Aluminium
Stud Diameter: 114
Rim Width: 8.5J
Brand: Ultralite
Rim Diameter: 18 inches
Rim Structure: One Piece
Offset: 35
Number of Studs: 5
Condition: Brand New still in boxes
Colour: Gunmetal polished lip
Each wheel comes with a complete fitting kit (metal valve and centre cap)


Link to ULTRALITE website: http://www.ultralitewheels.com/atec-2.htm


Pics of one of mine, tried to show the nice dish they have.











These cost me £185 a wheel plus P&P (just shy of £800 in total)


Open to offers around this price

In essex area for collectoin but can post using Parcel force