08/09 Hatches, Stand up and show yourselves!!!
Scooby Regular
iTrader: (5)
Side under Spoiler ST96030ZR020
"Original" STi front spoiler ST96020ZR180 now SG517FG010 (additionally fitted with rubber skirt lip ST960204S291)
Adopted by Subaru as an OEM accessory hence change of part number
"Revised" STi front spoiler ST96020ZR260 (additionally fitted with rubber skirt lip ST960204S291)
Don, Rob etc - planned to get Japspeed FMIC but seems an endless wait at present in them getting re-stocked although they did hope to get them back in a month ago. Any other links for 08 STi Hatch FMIC without paying very inflated price guys?
I have some plans for car and the FMIC is the only item not avail at present?
I have some plans for car and the FMIC is the only item not avail at present?
Scooby Senior
PERRIN!!!!
http://shop.scoobyclinic.com/index.p...product_id=159
get what you pay for... look awesome fitted too with the black pipe work.
http://shop.scoobyclinic.com/index.p...product_id=159
get what you pay for... look awesome fitted too with the black pipe work.
Had looked at this Phil but having spent £5k 9 months ago and another poss £4k soon the Perrin wasn't going to come into the budget unless I dropped some other goodies - on speaking to Rob he was pretty impressed with his one without the need to go so high budget on FMIC hence looking for one lower than Perrin cost.
Last edited by ScottishRayman; 23 April 2014 at 07:54 AM.
Scooby Regular
Join Date: Aug 2011
Location: aberdeen
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
So it's that time of year again that the sun is shinning so I'm looking into getting some new suspension and wheels. I'm going for a set of coilovers and rota force 18x9 et 35. Only problem stopping me ordering them is which colour , my sti is wr blue, I was thinking white to be different but they only look good when clean and my cars a daily driver so do I stick with black or gunmetal or Evan bronze ?? Decisions decisions.
P.s bc or meister coilovers?
P.s bc or meister coilovers?
Scooby Regular
Join Date: Aug 2011
Location: aberdeen
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
This might sound like a very silly question from my previous post but since I can't get rota force, I have came across rota mxr wheels, they are also 18x9 et 35 5x114.3 but will they fit over the bermbos? I know they are exactly the same size so does that mean yea they will fit?
Thanks
Thanks
Scooby Regular
Join Date: Jun 2013
Location: North Yorks
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Easter at the Ring
We went to the ring over Easter again but this time with the hatch instead of the spec C. so was not to sure how it would go with the 2,0l in a heavy car but was very pleased with it,she turned in very well after the powerstation mods and was very balenced on the limit, the best lap was a 8.20 btg
This is a lap trying to catch my mate Rob in his Spec C it was his second lap of the weekend and I had done about 7 at this time
This is a lap trying to catch my mate Rob in his Spec C it was his second lap of the weekend and I had done about 7 at this time
Scooby Regular
Join Date: Apr 2014
Location: leicester
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Hi, I have been advised that Rob Ostle is the man to speak to regarding a fault that I have with my 330s that no one can seem to get to the bottom of! Rob if you read this and you have time please can you send me a message.
regards Lee
regards Lee
Scooby Regular
iTrader: (5)
My advice would be to unplug the ecu from the passenger foot well and check the resistance's on the wiring which heads back to the CTS. if this checks out ok it would be advised to check the pin connections on both the plug and the ecu for good connectivity. There are no known issues with ECU failures to press but that doesn't mean it cant happen. But going by what your dealer has said by moving the wires etc the fault goes its a connectivity issue rather than an ecu fault.
For information the ecu's were removed on the cars for reflashing so it could be that there has been either a wire broken/trapped etc or the pins misaligned causing future issues.
I have no service manual to hand on this laptop so cant tell you wiring colours and pin numbers at present. I can check this back at the workshop on Monday.
Hope this information assists. Its back to basics really with the wiring and resistance checks and continuity to grounds
Scooby Senior
wanting to get my 19" rebalanced this week and have the tyres rotated round. then re fit on my car, removing the orange winter alloys.
thinking of swapping the wheel nuts, which should I be looking at and what size?
anything here?
http://www.just-subaru.com/impreza-2...erby=relevance
or recommend me a set.
tnx
thinking of swapping the wheel nuts, which should I be looking at and what size?
anything here?
http://www.just-subaru.com/impreza-2...erby=relevance
or recommend me a set.
tnx
Scooby Regular
iTrader: (11)
wanting to get my 19" rebalanced this week and have the tyres rotated round. then re fit on my car, removing the orange winter alloys.
thinking of swapping the wheel nuts, which should I be looking at and what size?
anything here?
http://www.just-subaru.com/impreza-2...erby=relevance
or recommend me a set.
tnx
thinking of swapping the wheel nuts, which should I be looking at and what size?
anything here?
http://www.just-subaru.com/impreza-2...erby=relevance
or recommend me a set.
tnx
Scooby Senior
Which ones should I look at?
Scooby Regular
iTrader: (9)
Join Date: Nov 2010
Location: Cheltenham
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
Hi everyone.
I have a 2009 with a standard exhaust system.
I can get hold of prodrive back box.. What do these sound like? Are they any good?
Thanks
I have a 2009 with a standard exhaust system.
I can get hold of prodrive back box.. What do these sound like? Are they any good?
Thanks
Scooby Senior
Hi.
Prodrive back box is stainless steal. 3.5" tail pipe exits.
Same as 330s
Mine sounds o.k. Nothing loud tho.
Prodrive back box is stainless steal. 3.5" tail pipe exits.
Same as 330s
Mine sounds o.k. Nothing loud tho.
Scooby Regular
Join Date: Mar 2006
Location: Down the road from Oulton Park
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
The spec is listed in my profile. It's done 30k and has a new MOT and 6 months tax. I'm about 5 miles from Oulton Park.
Has the original Prodrive exhaust and second set of wheels with winter tyres and most of the original bits that have been upgraded.
Has the original Prodrive exhaust and second set of wheels with winter tyres and most of the original bits that have been upgraded.
Scooby Senior
taken off for the summer...
refitted...
refitted...
The prodrive exhaust is louder than the standard issue but not loud enough to upset the neighbours. The twin chrome tailpipes also look miles better than the original
Scooby Regular
Scooby Regular
Yes mate changing the springs and the alloys from 17 to 18s resulted in a drop of only 35mm which keeps it ok for speed bumps! the 18s fill the arches a lot better than the 17s giving it a nicer look!