08/09 Hatches, Stand up and show yourselves!!!
27 July 2009, 11:25 AM
#451
Scooby Newbie
Join Date: Jun 2005
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
I hear what your saying. 
If its got a tracker you should have some paper work and certificate.
Talking of paper work have you got your manuals yet?
I only knew to look out for these because my previous WRX was a euro import too.
I had to pay extra to have the tracker alarm fitted
If its got a tracker you should have some paper work and certificate.
Talking of paper work have you got your manuals yet?
I only knew to look out for these because my previous WRX was a euro import too.
I had to pay extra to have the tracker alarm fitted
27 July 2009, 11:37 AM
#452
Fogs, yep, came in a huge box with stalk, relay and all the gear, seems the car is pre-wired for the fogs so hoping they should be relativly easy to fit. Seems a wates of money though to have a whole new stalk dedictated to cars with fogs, unless it also goes on something like the new Legacy that may have fos as standard!
Mesh, went for the Zunsport mesh that fits the stock grill, originally wanted the Subaru option mesh but thought Silver Mesh on a silver car was not for me so went for the black. Was tempted by your new grill but quite liked the
silver accent on the stock grill, especially as it matches the silver on the fogs.
Did notice though yesterday that the new fogs have some mesh in which now won't match my new grills, grrr.
Mesh, went for the Zunsport mesh that fits the stock grill, originally wanted the Subaru option mesh but thought Silver Mesh on a silver car was not for me so went for the black. Was tempted by your new grill but quite liked the
silver accent on the stock grill, especially as it matches the silver on the fogs.
Did notice though yesterday that the new fogs have some mesh in which now won't match my new grills, grrr.
i've just been messing around with overlays for hte rear lights
did a 100% red and a 75% black
i quite liked the look of the tinted black.
27 July 2009, 11:49 AM
#454
Scooby Regular
iTrader: (3)
Join Date: Nov 2000
Location: Norfolk
Posts: 2,239
Likes: 0
Received 0 Likes
on
0 Posts
they said to post copy of the logbook and copy my passport and they will send out the manual and service book with warranty papers same as my last 2 subaru i had from them.I called them up today to find out if it is fitted with the alarm and tracker the sales man i dealed with is out they said he will call me back.I will let khow what happens as soon as they get back to me.hoping they will pay for alarm and tracker if there is one not fitted.
27 July 2009, 12:01 PM
#455
Scooby Regular
iTrader: (15)
Join Date: Apr 2006
Location: Kent
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
Thought you had the spoiler already, wondered why it was not on the car yet, how does it look? I emailed them this am to see if they were going to make a V-lip in carbon but alas no their not unfortunately!
27 July 2009, 04:36 PM
#459
Scooby Regular
iTrader: (15)
Join Date: Apr 2006
Location: Kent
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
Don't forget H&S Direct,
Stainless exhausts manifolds headers
Quad pipe £464 + £182 for centre pipe.
Stainless exhausts manifolds headers
Quad pipe £464 + £182 for centre pipe.
27 July 2009, 09:14 PM
#465
Scooby Regular
Join Date: May 2001
Location: Suffolk, very near Adnams !!
Posts: 2,860
Likes: 0
Received 0 Likes
on
0 Posts
rb5 286
Whats the fit like on your rear light tints as I am having problems with the guy who has done mine...bubbles, ragged edge, lifting etc, where abouts are you as the FSTi needs doing as well.
Mog
Whats the fit like on your rear light tints as I am having problems with the guy who has done mine...bubbles, ragged edge, lifting etc, where abouts are you as the FSTi needs doing as well.
Mog
27 July 2009, 09:56 PM
#466
i got a few bubble in them but i cant be arsed to pop them as they will go on their own.
i just used a heat gun to warm the vinyl then pulled it to stretch over and round
i now have some unused red overlay stuff that turned up today that i ordered but never used as i prefer the tinted ones i made myself
Rob, that scoobyworl one sounds awesome!!! thanks
i just used a heat gun to warm the vinyl then pulled it to stretch over and round
i now have some unused red overlay stuff that turned up today that i ordered but never used as i prefer the tinted ones i made myself
Rob, that scoobyworl one sounds awesome!!! thanks
28 July 2009, 12:20 AM
#467
they advertised that the car comes with cat 1 alarm and tracker how can i find out if my has it or not because i will make them pay for it.
the link were they say it has cat 1 alarm and tracker
new Subaru Impreza hatchback's at Motor Depot Car Supermarkets
the link were they say it has cat 1 alarm and tracker
new Subaru Impreza hatchback's at Motor Depot Car Supermarkets
28 July 2009, 01:24 PM
#468
2008 STI Hatch Part Numbers.
ST96020ZR040 :: STi V-Limited Lip
ST960204S290 :: STi V-Limited Lip Rubber Protector
ST1654621010 :: STI Sports Air Cleaner Filter Element
Suspension
ST20330ZR010 :: Front springs rated at 50N/mm, approximately 5kgf/mm (Lowers the vehicle approximately -15mm)
ST20330ZR020 :: Rear Springs rated at 40N/mm, approximately 4kgf/mm (Lowers the vehicle approximately -15mm)
ST20106ZR000 :: STI Front Cross Member Support kit (Supports the front cross member / The arms support the front two sides to increase the stiffness of the front crossmember)
ST20502ZR000 :: STI Front Strut Brace (New concept with patent pending center flexible link ball / High rigidity construction with all mounting hardware included)
ST20512ZR010 :: STI Flexible Lower Arm Bar
ST20250ZR000 :: STI Rear Suspension Link Set
Wheels
ST28170ST060 :: STI security wheel nut set
ST96020ZR040 :: STi V-Limited Lip
ST960204S290 :: STi V-Limited Lip Rubber Protector
ST1654621010 :: STI Sports Air Cleaner Filter Element
Suspension
ST20330ZR010 :: Front springs rated at 50N/mm, approximately 5kgf/mm (Lowers the vehicle approximately -15mm)
ST20330ZR020 :: Rear Springs rated at 40N/mm, approximately 4kgf/mm (Lowers the vehicle approximately -15mm)
ST20106ZR000 :: STI Front Cross Member Support kit (Supports the front cross member / The arms support the front two sides to increase the stiffness of the front crossmember)
ST20502ZR000 :: STI Front Strut Brace (New concept with patent pending center flexible link ball / High rigidity construction with all mounting hardware included)
ST20512ZR010 :: STI Flexible Lower Arm Bar
ST20250ZR000 :: STI Rear Suspension Link Set
Wheels
ST28170ST060 :: STI security wheel nut set
28 July 2009, 10:01 PM
#469
Scooby Regular
Join Date: May 2009
Location: Berkshire
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
NooScoob Meet @Litchfield September 5th
winmoz (Handling kit - to be fitted on the day)
StanS (coming to see Hatches amd meet peeps, discuss mods etc - no work on car).
MOTORS S GT
Mobius 1 (Cossy Panel filter, ALK, Springs?, Steering feel, Wheel alignment)
Dave P
lord h
riggedSTI
Rob84
Codie247
Midichlorian
sammyh
stuart2008sti and friend in his 2008 sti
Simon C (possible)
Any more for any more?
Don't forget that if you book any work or order any parts on the day you will qualify for a discount.
Cheers
W
29 July 2009, 09:17 AM
#471
Scooby Regular
iTrader: (15)
Join Date: Apr 2006
Location: Kent
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
That looks ace, was not sure about the rear light tints yesterday but now with the spoiler it looks spot on.
Sorry to spend your money but have you considered the carbon front v-lip and carbon exhaust finishers!!!
Sorry to spend your money but have you considered the carbon front v-lip and carbon exhaust finishers!!!
