Lets see your "One off" modifications!
#361
Scooby Regular
iTrader: (5)
Decided to change the air filter that came with the APS induction pipe as it looked a bit small and had seen better days, couldn't fit the new filter on the induction pipe so had to use a nice big piece of silicon hose with a 45 degree bend
Standard filter in the wheel arch
New filter against the old
New filter in the wheel arch
Filter should get plenty of cold air through the fog light cover
Standard filter in the wheel arch
New filter against the old
New filter in the wheel arch
Filter should get plenty of cold air through the fog light cover
#363
Scooby Regular
iTrader: (7)
Join Date: Apr 2009
Location: DIESEL POWERED BORAT! SLAMMED, R32 WHEELS, MAPPED, DE-CAT, TINTS. LOVE IT!
Posts: 2,032
Likes: 0
Received 0 Likes
on
0 Posts
brillient thread!! no pics, but i have mounted LEDs in the top of the door cards (like vag cars have in the top of the door locks)
looks good at night!
looks good at night!
#364
Scooby Regular
iTrader: (7)
Join Date: Apr 2009
Location: DIESEL POWERED BORAT! SLAMMED, R32 WHEELS, MAPPED, DE-CAT, TINTS. LOVE IT!
Posts: 2,032
Likes: 0
Received 0 Likes
on
0 Posts
Decided to change the air filter that came with the APS induction pipe as it looked a bit small and had seen better days, couldn't fit the new filter on the induction pipe so had to use a nice big piece of silicon hose with a 45 degree bend
Standard filter in the wheel arch
New filter against the old
New filter in the wheel arch
Filter should get plenty of cold air through the fog light cover
Standard filter in the wheel arch
New filter against the old
New filter in the wheel arch
Filter should get plenty of cold air through the fog light cover
thats seriously cool!!
whats it like in the wet??
#368
Scooby Regular
iTrader: (5)
Sick of not being able to see when i open the doors on my car at home so i did a small mod abit like a volvo.
Remove Door Card Assy.
Mark out on Door card Were needs to be cut out.
Got a 4 Red Led flat Mounted Led Panel.
Mount Led Panel into the door Card which has been Cut out.
Route wires Through the door panel and through the Rubber Joint in the door.
Wire Light Panel up to the Door Pin Switch assy & there we have it courtesy Lights to illuminate the ground when opening the doors.
Remove Door Card Assy.
Mark out on Door card Were needs to be cut out.
Got a 4 Red Led flat Mounted Led Panel.
Mount Led Panel into the door Card which has been Cut out.
Route wires Through the door panel and through the Rubber Joint in the door.
Wire Light Panel up to the Door Pin Switch assy & there we have it courtesy Lights to illuminate the ground when opening the doors.
#373
Scooby Regular
iTrader: (36)
Join Date: Jun 2007
Location: Wolves
Posts: 2,798
Likes: 0
Received 0 Likes
on
0 Posts
I like this mod a lot might just have to copy it sorry
Sick of not being able to see when i open the doors on my car at home so i did a small mod abit like a volvo.
Remove Door Card Assy.
Mark out on Door card Were needs to be cut out.
Got a 4 Red Led flat Mounted Led Panel.
Mount Led Panel into the door Card which has been Cut out.
Route wires Through the door panel and through the Rubber Joint in the door.
Wire Light Panel up to the Door Pin Switch assy & there we have it courtesy Lights to illuminate the ground when opening the doors.
Remove Door Card Assy.
Mark out on Door card Were needs to be cut out.
Got a 4 Red Led flat Mounted Led Panel.
Mount Led Panel into the door Card which has been Cut out.
Route wires Through the door panel and through the Rubber Joint in the door.
Wire Light Panel up to the Door Pin Switch assy & there we have it courtesy Lights to illuminate the ground when opening the doors.
#375
#377
Scooby Regular
Join Date: Feb 2009
Location: East Yorks Coast
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Sick of not being able to see when i open the doors on my car at home so i did a small mod abit like a volvo.
Remove Door Card Assy.
Mark out on Door card Were needs to be cut out.
Got a 4 Red Led flat Mounted Led Panel.
Mount Led Panel into the door Card which has been Cut out.
Route wires Through the door panel and through the Rubber Joint in the door.
Wire Light Panel up to the Door Pin Switch assy & there we have it courtesy Lights to illuminate the ground when opening the doors.
Remove Door Card Assy.
Mark out on Door card Were needs to be cut out.
Got a 4 Red Led flat Mounted Led Panel.
Mount Led Panel into the door Card which has been Cut out.
Route wires Through the door panel and through the Rubber Joint in the door.
Wire Light Panel up to the Door Pin Switch assy & there we have it courtesy Lights to illuminate the ground when opening the doors.