Lets see your "One off" modifications!
I'm now bored with all the usual mods that everyone does, so lets see some one offs. Anything that you cant buy in the shops/on the net.
Here is one of mine. Commander in a dash mount. http://www.smitheyclose.co.uk/scooby.../Commander.JPG |
|
Commander in a dash mount.
Commander in a dash mount. that looks pretty cool and looks very smart fairplay thats deffo worth copy writing :lol1:
|
|
|
Welloil/P1
Excellent. Like the FC in the dash (if you have the face lift) and that TMIC bracket is great! Novel thread, wish i could contribute! Graham |
probably the most expensive one...
Made my own intercooler :D http://www.ashlyn.plus.com/projects/coolerfinish.jpg |
Originally Posted by Fuzz
probably the most expensive one...
Made my own intercooler :D http://www.ashlyn.plus.com/projects/coolerfinish.jpg |
Mark your putting all of us to shame :o what an array of gadgetry :cool:
Right not quite on such a grand scale but here I go, Firstly SECS monitor with Knocklink built in... http://img.photobucket.com/albums/v11/Simon/SECS001.jpg Now an off the car mod ;) Ever noticed how much a pain it is to jack the car up with a trolly jack, well ended up modding the jack so there is a rubber coated lump of ally on the end with a groove cut into it ;) just allows the sill jacking points to sit in it nicely. http://img.photobucket.com/albums/v11/Simon/jack2.jpg http://img.photobucket.com/albums/v1...n/phone004.jpg How's that :D |
The knocklink in the secs monitor looks superb Simon!:cool:
Im liking the trolley jack mod BUT its still not clever IMHO doing it on the chassis rails with a trolley jack. Just put it on the sump to lift both fronts up, or the rear diff to do the rears. |
Originally Posted by jonjo
Intresting...does this work well?
Will let you know when i get my hands on the group buy for the inlet temp gauge kit in a few weeks. Andy |
Originally Posted by p1mark
The knocklink in the secs monitor looks superb Simon!:cool:
Im liking the trolley jack mod BUT its still not clever IMHO doing it on the chassis rails with a trolley jack. Just put it on the sump to lift both fronts up, or the rear diff to do the rears. |
my own little spoiler lifters... made the world of difference on the wing :)
http://www.ocuk-motors.co.uk/gallery...serialNumber=2 |
Lifting it on the sump... OUCH!!
better to lift on the steel plate just behind the sump. Andy |
Originally Posted by Fuzz
Lifting it on the sump... OUCH!!
better to lift on the steel plate just behind the sump. Andy Great job on the IC by the way Andy! make me one????:D |
does this count i made the sti stencil to spray the intercooler
http://www.ftos.net/albums/album350/IMG_0377.sized.jpg |
|
I added another little one off last night! Bit of OTT bling never hurt anyone:lol1:
Over on the P1woc, one of the guys organises a group buy for limited edition plaques (unlike RB5/WR1 the P1 does not have a factory fitted one) Normal place for fitment is in the centre console tray, but i have stuck one on a polished stainless plate and mounted it at the rear of the engine bay. obviously only works with a FMIC. http://img.photobucket.com/albums/v3...rk/plaque1.jpg http://img.photobucket.com/albums/v3...rk/plaque2.jpg |
All very, very cool! Keep them coming!
|
Si, you an engineer mate, like the jack idea,
|
P1 Mark,
Your mods are stunning mate, My favorite gas to be the battery cover!! Love stuff like that because it looks better than factory :d Great work mate, keep it up. Shame you dont make more of that stuff, id buy some :D |
Originally Posted by MickWrx
Si, you an engineer mate, like the jack idea,
|
Some great stuff here! :notworthy
Originally Posted by frayz
Your mods are stunning mate, My favorite gas to be the battery cover!!
Love stuff like that because it looks better than factory :d Great work mate, keep it up. Shame you dont make more of that stuff, id buy some :D |
Originally Posted by SirFozzalot
Some great stuff here! :notworthy
I reckon there would be quite a few people interested! Best get in the que;) I normally make a couple of most things if i have time, but its for mates really. its not my full time employment so i dont need to make a living out of it so would rather keep it as a hobby IYSWIM Obviously i am an engineer, and lucky enough to have access to kit and materials to make anything i want to really, but im sure you will understand its best not to take the pi$$ with these matters! Obviously things like the battery covers and reservoir caps i could make a lot of money on but its not worth the risk:thumb: |
Bought 3 back boxs that were the wrong size/model so in the end made i "made it av it". Not sure if made any difference but power is up from 264 to 284 with this mod and a K&N Induction kit rather than panel filter and a unduction pipe.
http://bbs.scoobynet.co.uk/showthread.php?t=504237 |
Knocklink LEDs in A-pillar pod
http://server2.uploadit.org/files/jaymawrx-AFRKL1.jpg Cold air shield http://i9.photobucket.com/albums/a80...ru/16gbay3.jpg |
I think Mark and Andy are the winning duo so far. Like the stencil for the STI logo. Have you thought about making some and selling them on?
|
Mark thats very nice m8 looking forward to seeing it and pinching some ideas this Year;)
Heres my input to the thread. https://smg.photobucket.com/albums/v...ooby/grey1.jpg |
What we looking at? :)
|
All times are GMT +1. The time now is 05:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands