Lets see your "One off" modifications!
#391
#392
Granby, can you remember where you got the piece of Silicon Hose mate?
Also, the sizes if possible.
Thanks in advance
Also, the sizes if possible.
Thanks in advance
Decided to change the air filter that came with the APS induction pipe as it looked a bit small and had seen better days, couldn't fit the new filter on the induction pipe so had to use a nice big piece of silicon hose with a 45 degree bend
Standard filter in the wheel arch
New filter against the old
New filter in the wheel arch
Filter should get plenty of cold air through the fog light cover
Standard filter in the wheel arch
New filter against the old
New filter in the wheel arch
Filter should get plenty of cold air through the fog light cover
#393
Scooby Regular
iTrader: (5)
Hose is 89mm 45 degree elbow - A45-89
You will also need a 89mm alloy hose joiner - FMHJ89
K & N filter - RU-1785
#408
#409
Scooby Regular
iTrader: (1)
Join Date: Jul 2007
Location: Between a speed bump and a pot hole
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Meaning to post this for a while. Poor picture, but heres my Knocklink installed in my PSI3 Data monitor. Went for a factory look and I think it worked
The LEDs are perfectly vertical, the camera lens has made them go all
The LEDs are perfectly vertical, the camera lens has made them go all
#411
Scooby Regular
Join Date: Mar 2008
Location: AZ, USA
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
CF Subaru badge and I installed a trunk STI badge on the grill.
This is how close you have to be to see how I made sure it wouldn't fly off at 160+ MPH
It's a little bigger than the normal front STI badge; Saw a similar thing done on GT-R's before.
This is how close you have to be to see how I made sure it wouldn't fly off at 160+ MPH
It's a little bigger than the normal front STI badge; Saw a similar thing done on GT-R's before.
Last edited by John2.5RS; 20 January 2010 at 02:53 AM.
#412
Scooby Regular
Join Date: Aug 2006
Location: ESSEX ...BORN AND BRED PETROL HEAD....................... MANS BEST FRIEND IS A ENGLISH BULL TERRIER
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
Know its been a while since ive been on here and just sat and re read the front mount intercooler fitting guide I wrote now in archives noticed Inever put the finished bumper pics up so here they are.
KIP
CAR NOW FOR SALE
KIP
#413
Scooby Regular
Join Date: Dec 2006
Location: Burton on Trent
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
here's mine, custom driving lights install into fog covers on a blobeye(dont seem to have any pics of during the build)
and one off custom door builds for focal speakers
and one off custom door builds for focal speakers
#415
Scooby Regular
Join Date: Dec 2006
Location: Burton on Trent
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
yeah lol, could only find 2 way stretch vinyl at the time and i was in a rush to get it back together lookin halfway decent so bodged them a bit lol. gonna try and make a fibreglass mould of it then i can lose the mdf and filler hopefully to save some weight and then trim them properly
#417
Scooby Senior
iTrader: (51)
Join Date: Nov 2005
Location: Wherever I park my car, that's my home
Posts: 20,491
Likes: 0
Received 2 Likes
on
2 Posts
yeah lol, could only find 2 way stretch vinyl at the time and i was in a rush to get it back together lookin halfway decent so bodged them a bit lol. gonna try and make a fibreglass mould of it then i can lose the mdf and filler hopefully to save some weight and then trim them properly
Beware of making the too thin and light as they'll just end up rattling and sounding awful.
If you put the effort into getting the finish good you could always paint them