Hayward & Scott Group Buy
#271
ah what the hell, i can't resist!!
Headers
Mneame - Equal length headers - Classic
swiggi - Equal length headers - Bugeye (SIDC)
Jay_bee - UNEQUAL length headers - PAID & WRAP/SPRAY/LOCKWIRE SENT
De-cat down pipe
Mneame - decat downpipe - Classic
pwhittle - decat downpipe 93 WRX - Classic
Ricky81 sti - decat downpipe - twin scroll jdm v8 (plus resistor fix) 3"
jonnygPDV - decat downpipe - classic (tbc) (SIDC)
wrxtankie - decat downpipe open neck - JDM STI RA 02 in 3"
Dezi 240 - decat downpiepe - classic rb5
rmtypeR - decat downpipe - classic
wrx_rich - decat downpipe 3" - newage to mate to hks hiper without linkpipe
Kwaky - decat downpipe - STi4 2.5" Open Neck
satpink - decat downpipe - classic ver 4 type r- 3" to mate to nur spec r
nullfork - decat downpipe - 3" - P1
Wonder Wagon - decat downpipe open neck - classic
cts5555 - decat downpipe - classic p1
sampit - decat dp - jdm sti v8 - 3" open neck.
DRINKYWRX- decat downpipe-my01 uk 2.5"open neck
Ozzy_B - decat downpipe - classic STi 5 - 3" open neck to mate to 3" HKS Hiper centre section
Catted Down pipe
Ben v7 - catted down pipe - MY01 WRX - (if 5+)
NXG - catted down pipe - MY03 WRX (if 5+) 3" pipework
scants - catted down pipe - classic (if 5+) (p1) (SIDC)
Flat Eric - catted down pipe - MY03 WRX
ScoobyDawg - catted down pipe - classic 1998 WRX TypeR JDM - (if 5+) 3" pipework?
vj sti - catted downpipe - 53 plate STi UK (3")
Jap Back Box
NXG - MY03 WRX (if 5+ 3" pipework)
Baggers - Classic (3" pipework)
RB5 69 - Classic (2.5" pipework)
wrx-ian - MY03 WRX
vj sti - 53 plate STi UK (3")
Original Back Box
Scants - classic (p1) - if 5+ - tbc
Centre Section
frayz - centre section ( long bit only )- Newage (tbc)
Caveman - de cat centre section - forrester - classic
NXG - Straight through centre section - (if 5+ 3" pipework)
gazjenno - centre section - classic (if 5+)
rmtypeR - centre section - classic
Scants - centre section - classic (p1) (if 5+)
Flat Eric - Straight through long centre section - MY03 WRX
satpink - centre section - classic ver 4 type r 3" - mate to nur spec r
NAK - decat and staight through centre pipe - my03
Plym51 - long centre section with a silencer - 2001 Bugeye wrx
Stainy - Straight through long centre section - MY04 WRX
nullfork - 3"->2.5" centre section with resonator - P1
VJ_STi - de cat centre section + Resonated centre both 3" for a 53 plate STi UK
obi - centre section with resonator - 2003 forrester xt
New_scooby_04 - Centre section for a classic MY99
Up Pipe
Blue Streak 2 - up-pipe - newage (2002 wrx)
NXG - up pipe - MY03 WRX (if 5+ 3" pipework)
Legacysti - up pipe - classic sti v2.
Flat Eric - up pipe - MY03 WRX (No boss for EGT Sensor - Thanks)
Ben v7 - up pipe - MY01 WRX
Forrester Back Box
Mark Champion - Forester Classic backbox
Mark Champion - Forester Classic backbox
obi - backbox - 2003 forrester xt
Headers
Mneame - Equal length headers - Classic
swiggi - Equal length headers - Bugeye (SIDC)
Jay_bee - UNEQUAL length headers - PAID & WRAP/SPRAY/LOCKWIRE SENT
De-cat down pipe
Mneame - decat downpipe - Classic
pwhittle - decat downpipe 93 WRX - Classic
Ricky81 sti - decat downpipe - twin scroll jdm v8 (plus resistor fix) 3"
jonnygPDV - decat downpipe - classic (tbc) (SIDC)
wrxtankie - decat downpipe open neck - JDM STI RA 02 in 3"
Dezi 240 - decat downpiepe - classic rb5
rmtypeR - decat downpipe - classic
wrx_rich - decat downpipe 3" - newage to mate to hks hiper without linkpipe
Kwaky - decat downpipe - STi4 2.5" Open Neck
satpink - decat downpipe - classic ver 4 type r- 3" to mate to nur spec r
nullfork - decat downpipe - 3" - P1
Wonder Wagon - decat downpipe open neck - classic
cts5555 - decat downpipe - classic p1
sampit - decat dp - jdm sti v8 - 3" open neck.
DRINKYWRX- decat downpipe-my01 uk 2.5"open neck
Ozzy_B - decat downpipe - classic STi 5 - 3" open neck to mate to 3" HKS Hiper centre section
Catted Down pipe
Ben v7 - catted down pipe - MY01 WRX - (if 5+)
NXG - catted down pipe - MY03 WRX (if 5+) 3" pipework
scants - catted down pipe - classic (if 5+) (p1) (SIDC)
Flat Eric - catted down pipe - MY03 WRX
ScoobyDawg - catted down pipe - classic 1998 WRX TypeR JDM - (if 5+) 3" pipework?
vj sti - catted downpipe - 53 plate STi UK (3")
Jap Back Box
NXG - MY03 WRX (if 5+ 3" pipework)
Baggers - Classic (3" pipework)
RB5 69 - Classic (2.5" pipework)
wrx-ian - MY03 WRX
vj sti - 53 plate STi UK (3")
Original Back Box
Scants - classic (p1) - if 5+ - tbc
Centre Section
frayz - centre section ( long bit only )- Newage (tbc)
Caveman - de cat centre section - forrester - classic
NXG - Straight through centre section - (if 5+ 3" pipework)
gazjenno - centre section - classic (if 5+)
rmtypeR - centre section - classic
Scants - centre section - classic (p1) (if 5+)
Flat Eric - Straight through long centre section - MY03 WRX
satpink - centre section - classic ver 4 type r 3" - mate to nur spec r
NAK - decat and staight through centre pipe - my03
Plym51 - long centre section with a silencer - 2001 Bugeye wrx
Stainy - Straight through long centre section - MY04 WRX
nullfork - 3"->2.5" centre section with resonator - P1
VJ_STi - de cat centre section + Resonated centre both 3" for a 53 plate STi UK
obi - centre section with resonator - 2003 forrester xt
New_scooby_04 - Centre section for a classic MY99
Up Pipe
Blue Streak 2 - up-pipe - newage (2002 wrx)
NXG - up pipe - MY03 WRX (if 5+ 3" pipework)
Legacysti - up pipe - classic sti v2.
Flat Eric - up pipe - MY03 WRX (No boss for EGT Sensor - Thanks)
Ben v7 - up pipe - MY01 WRX
Forrester Back Box
Mark Champion - Forester Classic backbox
Mark Champion - Forester Classic backbox
obi - backbox - 2003 forrester xt
#272
That's it folks we have SHUT the GB,would like to say THANK YOU to everyone involved.Any who could FAX ( 01268 590772 )there details including SN name so we can cross off the list over would be much appriecated as i have a feeling it will be a busy day on the phone.The manifold will be a few weeks to despatch but everything else we will do deadline parts first due to being needed for maps etc ( is that OK ?? ) and then the other parts.We have lots in stock so most will get by the weekend.
Thank you
Ian
Thank you
Ian
#273
Originally Posted by Ben v7
Second that. Paid for my bits today. Thanks for making this happen mneame.
thanks to ian also.
looks like ian and the guys at h&s are going to be very busy!!!
#274
ian,
i missed this pm i had on the sidc board. it came through yesterday afternoon so was in time before the gb closed.
thanks,
matt
*De-Cat Down Pipe
*Centre Section 2.5" (with additional silencer) - presume this will be £88.13 on top of gb price as listed on H&S website (if its cheaper I would nt complain)
*Original Scooby Design Back Box 2.5"
Many thanks
Scoobyred
i missed this pm i had on the sidc board. it came through yesterday afternoon so was in time before the gb closed.
thanks,
matt
*De-Cat Down Pipe
*Centre Section 2.5" (with additional silencer) - presume this will be £88.13 on top of gb price as listed on H&S website (if its cheaper I would nt complain)
*Original Scooby Design Back Box 2.5"
Many thanks
Scoobyred
#275
Originally Posted by mneame
ian,
i missed this pm i had on the sidc board. it came through yesterday afternoon so was in time before the gb closed.
thanks,
matt
*De-Cat Down Pipe
*Centre Section 2.5" (with additional silencer) - presume this will be £88.13 on top of gb price as listed on H&S website (if its cheaper I would nt complain)
*Original Scooby Design Back Box 2.5"
Many thanks
Scoobyred
i missed this pm i had on the sidc board. it came through yesterday afternoon so was in time before the gb closed.
thanks,
matt
*De-Cat Down Pipe
*Centre Section 2.5" (with additional silencer) - presume this will be £88.13 on top of gb price as listed on H&S website (if its cheaper I would nt complain)
*Original Scooby Design Back Box 2.5"
Many thanks
Scoobyred
Ian
#284
Scooby Regular
iTrader: (1)
Join Date: Dec 2001
Location: You only live ONCE But if you do it right >>>>> ONCE is enough
Posts: 7,327
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Matt for organising the GB.
Perfect timing for me too.
Ian is paid,Xtreme are fitting on Friday & Pat is mapping on Saturday.
Then it will be off to the "Posers Cruise" Saturday night to see/hear/feel the difference.
Just been on the rollers @ Engine Advantages Witham so another trip in the not too distant future is called for.
Mark
Perfect timing for me too.
Ian is paid,Xtreme are fitting on Friday & Pat is mapping on Saturday.
Then it will be off to the "Posers Cruise" Saturday night to see/hear/feel the difference.
Just been on the rollers @ Engine Advantages Witham so another trip in the not too distant future is called for.
Mark
#286
Originally Posted by scoobyexhausts
That's it folks we have SHUT the GB,would like to say THANK YOU to everyone involved.Any who could FAX ( 01268 590772 )there details including SN name so we can cross off the list over would be much appriecated as i have a feeling it will be a busy day on the phone.The manifold will be a few weeks to despatch but everything else we will do deadline parts first due to being needed for maps etc ( is that OK ?? ) and then the other parts.We have lots in stock so most will get by the weekend.
Thank you
Ian
Thank you
Ian
#289
Matt
Some have already said it but felt I had to join them by saying 'A Big Thanks' for organising this GB
All booked in for this Saturday so role on Sunday and the drive home
VJ
Some have already said it but felt I had to join them by saying 'A Big Thanks' for organising this GB
All booked in for this Saturday so role on Sunday and the drive home
VJ
#290
i'm pleased that you are all happy with the gb. glad that it worked out well.
i need to pop up to xtreme on sat to get some more octane booster so i might see some of you up there if getting fitted on sat. also going to try to pop in and see ian so if any of you are about say hello.
i need to pop up to xtreme on sat to get some more octane booster so i might see some of you up there if getting fitted on sat. also going to try to pop in and see ian so if any of you are about say hello.
#292
i think that to back this gb up we'll need some pics in the gallery section once fitted - before and after would be good.
also if anyone can, how about some sound or even movie files so we can hear them as well. bit sad i know but i'll be wanting to show off the new noise of equal length headers so i'll try to get it sorted out.
also if anyone can, how about some sound or even movie files so we can hear them as well. bit sad i know but i'll be wanting to show off the new noise of equal length headers so i'll try to get it sorted out.
#296
Just had my centre decat and centre pipe fitted at H&S : ) Not too much noise difference when normal driving but open her up, you can hear a big difference!!
Thanks to mneame and Ian for this group buy.
Thanks to mneame and Ian for this group buy.