ah what the hell, i can't resist!!

Headers
Mneame - Equal length headers - Classic
swiggi - Equal length headers - Bugeye (SIDC)
Jay_bee - UNEQUAL length headers - PAID & WRAP/SPRAY/LOCKWIRE SENT

De-cat down pipe
Mneame - decat downpipe - Classic
pwhittle - decat downpipe 93 WRX - Classic
Ricky81 sti - decat downpipe - twin scroll jdm v8 (plus resistor fix) 3"
jonnygPDV - decat downpipe - classic (tbc) (SIDC)
wrxtankie - decat downpipe open neck - JDM STI RA 02 in 3"
Dezi 240 - decat downpiepe - classic rb5
rmtypeR - decat downpipe - classic
wrx_rich - decat downpipe 3" - newage to mate to hks hiper without linkpipe
Kwaky - decat downpipe - STi4 2.5" Open Neck
satpink - decat downpipe - classic ver 4 type r- 3" to mate to nur spec r
nullfork - decat downpipe - 3" - P1
Wonder Wagon - decat downpipe open neck - classic
cts5555 - decat downpipe - classic p1
sampit - decat dp - jdm sti v8 - 3" open neck.
DRINKYWRX- decat downpipe-my01 uk 2.5"open neck
Ozzy_B - decat downpipe - classic STi 5 - 3" open neck to mate to 3" HKS Hiper centre section

Catted Down pipe
Ben v7 - catted down pipe - MY01 WRX - (if 5+)
NXG - catted down pipe - MY03 WRX (if 5+) 3" pipework
scants - catted down pipe - classic (if 5+) (p1) (SIDC)
Flat Eric - catted down pipe - MY03 WRX
ScoobyDawg - catted down pipe - classic 1998 WRX TypeR JDM - (if 5+) 3" pipework?
vj sti - catted downpipe - 53 plate STi UK (3")

Jap Back Box
NXG - MY03 WRX (if 5+ 3" pipework)
Baggers - Classic (3" pipework)
RB5 69 - Classic (2.5" pipework)
wrx-ian - MY03 WRX
vj sti - 53 plate STi UK (3")

Original Back Box
Scants - classic (p1) - if 5+ - tbc

Centre Section
frayz - centre section ( long bit only )- Newage (tbc)
Caveman - de cat centre section - forrester - classic
NXG - Straight through centre section - (if 5+ 3" pipework)
gazjenno - centre section - classic (if 5+)
rmtypeR - centre section - classic
Scants - centre section - classic (p1) (if 5+)
Flat Eric - Straight through long centre section - MY03 WRX
satpink - centre section - classic ver 4 type r 3" - mate to nur spec r
NAK - decat and staight through centre pipe - my03
Plym51 - long centre section with a silencer - 2001 Bugeye wrx
Stainy - Straight through long centre section - MY04 WRX
nullfork - 3"->2.5" centre section with resonator - P1
VJ_STi - de cat centre section + Resonated centre both 3" for a 53 plate STi UK
obi - centre section with resonator - 2003 forrester xt
New_scooby_04 - Centre section for a classic MY99

Up Pipe
Blue Streak 2 - up-pipe - newage (2002 wrx)
NXG - up pipe - MY03 WRX (if 5+ 3" pipework)
Legacysti - up pipe - classic sti v2.
Flat Eric - up pipe - MY03 WRX (No boss for EGT Sensor - Thanks)
Ben v7 - up pipe - MY01 WRX

Forrester Back Box
Mark Champion - Forester Classic backbox
Mark Champion - Forester Classic backbox
obi - backbox - 2003 forrester xt

 

That's it folks we have SHUT the GB,would like to say THANK YOU to everyone involved.Any who could FAX ( 01268 590772 )there details including SN name so we can cross off the list over would be much appriecated as i have a feeling it will be a busy day on the phone.The manifold will be a few weeks to despatch but everything else we will do deadline parts first due to being needed for maps etc ( is that OK ?? ) and then the other parts.We have lots in stock so most will get by the weekend.

Thank you

Ian

 

no problem. took off a bit more at the end than i thought it would.

thanks to ian also.

looks like ian and the guys at h&s are going to be very busy!!!

 

ian,

i missed this pm i had on the sidc board. it came through yesterday afternoon so was in time before the gb closed.

thanks,

matt

*De-Cat Down Pipe

*Centre Section 2.5" (with additional silencer) - presume this will be £88.13 on top of gb price as listed on H&S website (if its cheaper I would nt complain)

*Original Scooby Design Back Box 2.5"


Many thanks

Scoobyred

 

Is this to be added to the list ??,centre with silencer is £150.

Ian

 

yes please. i think he got the price from the website rather than reading back into the thread.

thanks,

matt.

 

Have the phone's gone quiet yet?

 

i'm choosing my time to call wisely. lunch would be a bad time i guess as everyone will try to call then.

 

I'll think I'll phone later in the week

 

i only live round the corner so could beat you all to it. take the afternoon off and pop in there

unfortunatly the chance of getting time off is slim, unlike me.

 

Just phoned up to order and pay for mine.

Many thanks to Matt for organising the GB.

Best wishes,

Paul.

 

Sorry Matt, where the hell are my manners?!

Cheers for organising a well timed GB

Jeff

 

no worries guys. my first and successful gb. i'm quite chuffed really that it worked out.

 

Cheers Matt for organising the GB.

Perfect timing for me too.

Ian is paid,Xtreme are fitting on Friday & Pat is mapping on Saturday.

Then it will be off to the "Posers Cruise" Saturday night to see/hear/feel the difference.

Just been on the rollers @ Engine Advantages Witham so another trip in the not too distant future is called for.

Mark

 

Just paid for mine, cheers for setting up this GB!!

cant wait for it to arrive even though i wont be driving the scoob for another month or two

 

Are we just ringing(or faxing) to pay or do you need us to make contact first, cos I'd rather pm/email if you need contact beforehand.

 

All paid for
A massive thanks for sorting this out

 

Paid up today myself, thanks for sorting this out mate.

Good job well done and cheap

Thanx again
Richard.

 

Matt

Some have already said it but felt I had to join them by saying 'A Big Thanks' for organising this GB

All booked in for this Saturday so role on Sunday and the drive home

VJ

 

i'm pleased that you are all happy with the gb. glad that it worked out well.

i need to pop up to xtreme on sat to get some more octane booster so i might see some of you up there if getting fitted on sat. also going to try to pop in and see ian so if any of you are about say hello.

 

Just paid for mine, looking forward to hearing it

Ta muchly for sorting this out

 

i think that to back this gb up we'll need some pics in the gallery section once fitted - before and after would be good.

also if anyone can, how about some sound or even movie files so we can hear them as well. bit sad i know but i'll be wanting to show off the new noise of equal length headers so i'll try to get it sorted out.

 

Paid up today myself, thanks for sorting this out mate.

Good job well done and cheap

remap on the 9th perfect timming all round

cheers

 

Paid and done - thanks Matt and Ian.

 

***Warning***

I will be paying tomorrow

 

Just had my centre decat and centre pipe fitted at H&S : ) Not too much noise difference when normal driving but open her up, you can hear a big difference!!

Thanks to mneame and Ian for this group buy.

 

Paid for my back box this morning .... should have it on Friday!

Big thanks to Matt and Ian .... will post some piccies when I fit it!!

 

Just paid

 

Is this group buy still on. I'm after a Decat up and downpipe. How much please? Not quite sure how these group buys work. first tim for me!

 

I also would be wanting a Decat downpipe and center sect for a classic, Any chance??