Oil Catch Can/Tank Kit by Greddy
14 July 2004, 03:25 PM
#126
Scooby Regular
Join Date: Oct 2002
Location: from the planet Omicron Persei 8. What is this emotion "Wuv" you puny Earthlings speak of ??
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
Please can you reconfirm my tracking number, Royal Mail wont have any of it!!
Cheers,
Ste.w.
Cheers,
Ste.w.
15 July 2004, 12:12 AM
#129
I think it might be worth putting a pipe from the inlet connector into the steel wool ( is it stainless ... it is going to have to see wet hot acid gas! ) to better seperate the inlet and outlet gas.
And as Tim's pic at the top of this page shows, some scrubbing / seperation to knock out the oil helps, so maybe insert a divider ( attached at bottom and sides with araldite or similar ? ) between the inlet and outlet pipes?
I was myself wondering if I should drill and tap a 3rd hole ( is it 3/8 BSP thread ? ) so the cam covers get 1 inlet, crankcase gets it own and air out has the 3rd ?
Any ideas guys who know these things ?
And as Tim's pic at the top of this page shows, some scrubbing / seperation to knock out the oil helps, so maybe insert a divider ( attached at bottom and sides with araldite or similar ? ) between the inlet and outlet pipes?
I was myself wondering if I should drill and tap a 3rd hole ( is it 3/8 BSP thread ? ) so the cam covers get 1 inlet, crankcase gets it own and air out has the 3rd ?
Any ideas guys who know these things ?
15 July 2004, 09:47 PM
#132
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: Reading
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Hi Bryan,
I have asked for you and will you (and the other people that paid via cheque) know what the current status is.
Everyone,
Sorry I have not posted any pic's yet... I have been really busy working this week. I plan to install the can at the weekend so will let you know how I get on.
Thanks again for taking part
I have asked for you and will you (and the other people that paid via cheque) know what the current status is.
Everyone,
Sorry I have not posted any pic's yet... I have been really busy working this week. I plan to install the can at the weekend so will let you know how I get on.
Thanks again for taking part
16 July 2004, 11:13 AM
#134
Any chance you may be doing a second G/B on these as i missed out on the first one 
If any one has brought one and has changed there mind and wants to sell it let me know
Gary
If any one has brought one and has changed there mind and wants to sell it let me know
Gary
17 July 2004, 12:14 AM
#139
Scooby Regular
Join Date: Nov 2003
Location: in my rally car
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NelsonUK
Got mine yesterday - looks the business, many thanks for this GB
Just waiting for the pics to give me some pointers on how to fit it
Just waiting for the pics to give me some pointers on how to fit it
17 July 2004, 08:18 AM
#140
Scooby Regular
just got home from working away all week ,and I've got a little card telling me that a parcel is at the post office for me 
I found these installation pics and instructions.
hope these help
http://www.scoobymods.com/forums/sho...=&threadid=693
Phil
I found these installation pics and instructions.
hope these help
http://www.scoobymods.com/forums/sho...=&threadid=693
Phil
17 July 2004, 05:37 PM
#141
Scooby Regular
well, picked it up and seems ok for the money, thanks for sorting out the group buy.
no instructions at all though ,which would've helped a bit
thanks again
Phil
no instructions at all though ,which would've helped a bit
thanks again
Phil
17 July 2004, 09:39 PM
#147
Anybody install theirs yet? Mines in... but not attached to anything. The size of the hoses on the crankcase vent are 15mm but we have 12mm hoses and connectors on the can. So think i'm going to get some 15mm hose (the stuff you get is far too short for me to use anyway).
What solution have other people used?
Tony.
What solution have other people used?
Tony.
17 July 2004, 09:54 PM
#148
Scooby Regular
I thought this was going to be the "complete" kit ??
I also have no "T" peices , and no instructions. I bought this thinking it would contain everything I'd need.
also the can is a different size from mentioned
not very pleased or impressed
I also have no "T" peices , and no instructions. I bought this thinking it would contain everything I'd need.
also the can is a different size from mentioned
not very pleased or impressed
17 July 2004, 10:44 PM
#149
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: Reading
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Sorry I have not found the time to fit mine yet but I will and I will post some pics
All the cheques have cleared and so the last lot of can's will be sent out on Monday (sorry for the delay in clearing them)
OK... So there seems to have been a mix-up with the t-bits, I will be e-mailing the supplier to get this sorted. Please could you check your kits and let me know what you are missing.
simbo - Two Big, Two Small
scooby_si - Four Big, Two Small
IPALMER - One Small
MadGrip - Two Big, Two Small
All the cheques have cleared and so the last lot of can's will be sent out on Monday (sorry for the delay in clearing them)
OK... So there seems to have been a mix-up with the t-bits, I will be e-mailing the supplier to get this sorted. Please could you check your kits and let me know what you are missing.
simbo - Two Big, Two Small
scooby_si - Four Big, Two Small
IPALMER - One Small
MadGrip - Two Big, Two Small
17 July 2004, 11:01 PM
#150
Scooby Regular
Join Date: Nov 2001
Location: the middle bit
Posts: 8,238
Likes: 0
Received 0 Likes
on
0 Posts
erm well all i have was 1 small one as pikky per kit if that means i'm missing 4 big & 2 small then bring it on...although anyone wana throw me a bone as to where they need to go then as i still cant fathom where they're needed with the previous drawing?
Cheers
Si
Cheers
Si