Thank you all for the fast payment. The supplier will be sorting out T-pieces tomorrow and then will start sending out the complete kits.

One more bit of information for those that wanted to know... The hose sizes are both 9mm and 15mm (2 sets of adaptors included)

This list is up-to date as of 7pm tonight...

Tim Dave25 ***Paid***
rooferman ***Payment Sent***
RobDon ***Paid***
IPALMER ***Paid***
julian N/W wrx my93
symon wrx
chris garner ***Paid***
NelsonUK
scooby_si ***Paid***
ralphandcarol ***Payment Sent***
alanbell ***Payment Sent***
Big T
Jazz ***Paid***
Gurj
MadGrip ***Paid***
Vulnax999 ***Paid***
rooky1 ***Payment Awaiting Clearing***
Tone Loc ***Paid***
simbo ***Paid***
CataIunya
toxwaz ***Paid***
coulty
STE.W. ***Paid***
Henning (RX-7 Club) ***Paid***
Ruben Chelvaiyah (rotaryclub) ***Paid***
*Sonic*
RB5108 ***Payment Sent***
WRX_Rich
jason4656
Graeme Durie (rotaryclub)
ben {ref rooky1}

 

Just paid by Paypal

Thanks Tim

 

paid by pay pal

thanks for all your effort


does any one know how hard this would be to fit to a my02 wrx, some noddy insturctions would not go a miss

 

paid by paypal

thanx for your work on this

 

Late arrival, yes please.

 

A mate of mine is up for one too.

Payed by paypal but with Mikes credit card.

Cheers mate.

In summary 2 for me please

STE.W.

 

+++UPDATE++++

Many thanks for all who have paid so quickly... we are nearly there

There has been a slight delay, the t-pieces which lots of people have asked about are proving difficult to source. The supplier has tried all over the place, even B&Q but no one had any.

He has placed an order for plenty to cover the group buy, but they will not be here until Monday 12th.

We would rather post everything at the same time so we don't get mixed up with who's still waiting on T-pieces etc. Delivery will be put off till they arrive which is only a few days and will be well worth it.

If this is not acceptable to anyone, please accept my apologies and I will refund your money. Simply send an e-mail to s_n_groupbuy@hotmail.com

It's only a few days wait and will be worth it as you will have all you need to install the catch can.

Many thanks for your patience.

Tim


Here is the latest list..
Tim Dave25 ***Paid***
rooferman ***Payment Awaiting Clearing***
RobDon ***Paid***
IPALMER ***Paid***
julian N/W wrx my93
symon wrx ***Paid***
chris garner ***Paid***
NelsonUK
scooby_si ***Paid***
ralphandcarol ***Payment Sent***
alanbell ***Payment Awaiting Clearing***
Big T
Jazz ***Paid***
Gurj
MadGrip ***Paid***
Vulnax999 ***Paid***
rooky1 ***Payment Awaiting Clearing***
Tone Loc ***Paid***
simbo ***Paid***
CataIunya
toxwaz ***Paid***
coulty ***Paid***
STE.W. ***Paid*** X2
Henning (RX-7 Club) ***Paid***
Ruben Chelvaiyah (rotaryclub) ***Paid***
*Sonic*
RB5108 ***Payment Sent***
WRX_Rich ***Paid***
jason4656
Graeme Durie (rotaryclub)
ben {ref rooky1}
aceman_uk
tomp

 

Hi,

Looking at the way i wnat to install the can i have no need for any t-pieces. So if people don't want these t-pieces (Demon Tweeks and Rally Design normally have them in stock btw) then can the tank be sent straight away???

Tony.

 

Hi Tony,
That is a good point. I have already asked the supplier if this is fine with him and so I will let you know once I get an e-mail back.
Cheers,
Tim

 

I assume that the kit comes with T-pieces if you don't say anything? I deffo need them for mine.

 

Hi Tony,
If you really want yours sent without the t-pieces please let me know as they are all ready to go with the baffles sorted. It would be easier for us to send everyones in one go but I understand if you need it sooner.



Everyone... thanks again for waiting, only a couple more days now

Best Regards,
Tim

 

Hi,

Don't worry about sending mine out. I can wait.... i'll be too busy to fit it at the moment now anyway

Thanks anyway.

Tony.

 

OK mate, thank you for waiting, it will be worth it

 

Payment just sent via Paypal

 

THIS GROUP BUY WILL BE CLOSING ON FRIDAY 9th JULY at MIDNIGHT

Thanks to all who have taken part Everyone has been really good and I am sure you will be very happy with the kit

Not long now people

 

Gurj has apparently emailed the addy with no response, asking if OK to send cheque & so forth but no reply......Think he's getting worried & wanted to clarify how/what to do... Worst case i can pay for him on my paypal & he can giz us the £ back but be easier if he can just confirm wot to do, is OK etc with supplier.
Lettice no yer thoughts mate it's appreciated......
Cheers
Si

 

Hi Si,
That is odd... I have just checked the mailbox and I have replied to all the e-mails in there. Just to check he is using s_n_groupbuy@hotmail.com

I have re-sent you the PM message with all the details so if you could forward them to him?

 

Si.... All sorted mate.... for some reason good old hotmail thought his mail was "junk" so I didn't see it!!!

I thought I was going mad for a minuet!!! LOL.

 

lol yeah i've dun that loads b4 although to be fair i do get lots of admirers stalking me so i have to filter the good uns out for special treatment, wots yer excuse? lol
Anyway back to reality i take it you've let him know the full SP....?
Si

 

he he... it was just that hotmail knew he wasn't from ScoobyNet so dropped him off!

He is all sorted now.. I have had a reply from him and he is sending payment.

 

Am i correctin thinking you'd prefer payment via paypal? That being the case i'll use mine to pay for Gurj & we'll sort it out between us, presume that's no problem?
Si

 

Yeah, like I said to Gurj, we would preffer paypal so that all the cans can be sent on the same day... in one shipment rather than waiting for cheques to clear.

 

i've now paid on his behalf with both mine & his to deliver to my addy & we'll sort it out between us
Si

 

Thank you

 

Just a quick up-date...

Tim Dave25 ***Paid***
rooferman ***Payment Awaiting Clearing***
RobDon ***Paid***
IPALMER ***Paid***
symon wrx ***Paid***
chris garner ***Paid***
NelsonUK ***Paid***
scooby_si ***Paid***
ralphandcarol ***Payment Awaiting Clearing***
alanbell ***Payment Awaiting Clearing***
Big T
Jazz ***Paid***
Gurj ***Paid***
MadGrip ***Paid***
Vulnax999 ***Paid***
rooky1 ***Payment Awaiting Clearing***
Tone Loc ***Paid***
simbo ***Paid***
CataIunya
toxwaz ***Paid***
coulty ***Paid***
STE.W. ***Paid*** X2
Henning (RX-7 Club) ***Paid***
Ruben Chelvaiyah (rotaryclub) ***Paid***
*Sonic*
RB5108 ***Payment Awaiting Clearing***
WRX_Rich ***Paid***
jason4656
Graeme Durie (rotaryclub)
ben {ref rooky1} ***Payment Awaiting Clearing***
aceman_uk
tomp

 

So are these being sent out today ??

 

The T-pieces should have arrived today so I expect the kits were either sent today or will be sent out tomorrow. This is assuming the t-pieces arrived ok. I have sent an e-mail to the supplier and will post once I get a response.

Everyone will be getting tracking numbers for their order.

Cheers,
Tim

 

Cheers Tim, for organising and keeping us up to date!

I'll post when I get mine..

Neil

 

Oops completly forgot about this, just realised it is now the 12th !

 

Thanks to all who have taken part Those who have paid via cheque only have a little longer to wait but it will be worth it
This has been very successful and so here are your tracking numbers for royal mail...

TimDave25 - DT 5559 4260 3GB
rooferman ***Payment Awaiting Clearing***
RobDon - DT 5559 4261 7GB
IPALMER - DT 5559 4262 5GB
symon wrx - DT 5559 4263 4GB
chris garner - DT 5559 4264 8GB
NelsonUK - DT 5559 4265 1GB
scooby_si - DT 5559 4278 4GB
ralphandcarol ***Payment Awaiting Clearing***
alanbell ***Payment Awaiting Clearing***
Jazz - DT 5559 4267 9GB
Gurj - DT 5559 4278 4GB
MadGrip - DT 5559 4268 2GB
Vulnax999 - DT 5559 4269 6GB
rooky1 ***Payment Awaiting Clearing***
Tone Loc - DT 5559 4270 5GB
simbo - DT 5559 4271 9GB
toxwaz - DT 5559 4272 2GB
coulty - DT 5559 4273 6GB
STE.W. - DT 5559 4274 0GB
Henning - DT 5559 4275 3GB
Ruben Chelvaiyah - DT 5559 4276 7GB
RB5108 ***Payment Awaiting Clearing***
WRX_Rich - DT 5559 4277 5GB
ben {ref rooky1} ***Payment Awaiting Clearing***
tomp ***Payment Awaiting Clearing***

If anyone has found a good instalation guide please let us know and the supplier with put it up on his website. He has removed the one that comes with the kit as it would confuse. The kit is univeral and so the instructions are also univeral and in really badly translated english.

Don't worry because as soon as I get mine I will take photo's and let you all know how I get on.

Should be simple... three hoses... connect together using t-pieces then feed to the tank... out-put of tank goes back to the air box.