Oil Catch Can/Tank Kit by Greddy
#151
Got 2 large T's but no small ones.
Tone Loc - did you get 2 each of a large and a small can connector? One for each size of hose. I did. Same problem with hose, also was badly kinked but running if for 2 days has straightened it out ( heat I guess. )
I too will be buying longer hose for a decent proper install, currently plugged into ends of pipes at inlet pipe to catch can, vent to atmos, used a bit of hose to join the2 inlet pipe holes!
Not sure who useful mounting bracket is!
Any hope of some bungs for the 2 inlet pipe holes please?
Can is Ok though, and for the price a good shot!
Tone Loc - did you get 2 each of a large and a small can connector? One for each size of hose. I did. Same problem with hose, also was badly kinked but running if for 2 days has straightened it out ( heat I guess. )
I too will be buying longer hose for a decent proper install, currently plugged into ends of pipes at inlet pipe to catch can, vent to atmos, used a bit of hose to join the2 inlet pipe holes!
Not sure who useful mounting bracket is!
Any hope of some bungs for the 2 inlet pipe holes please?
Can is Ok though, and for the price a good shot!
#152
Originally Posted by scooby_si
erm well all i have was 1 small one as pikky per kit if that means i'm missing 4 big & 2 small then bring it on...although anyone wana throw me a bone as to where they need to go then as i still cant fathom where they're needed with the previous drawing?
Cheers
Si
Cheers
Si
Join these 2 hoses using a T and send to 1 connector on can. Other can connector either vert to amos the clean ( but likely part burnt air? ) or pipe back to one of the 2 holes you now have on the inlet. Block other hole on inlet.
Mount can somewhere
Done!
#156
Scooby Regular
iTrader: (1)
Originally Posted by vulnax999
On standard car there are 2 hoses going into the air inlet before the turbo about 12mm and 15 mm - 1 of each. The larger one is crankcase vent, smaller ( hard plastic for last 12 incheson mine ) is the combined cam covre vents.
Join these 2 hoses using a T and send to 1 connector on can. Other can connector either vert to amos the clean ( but likely part burnt air? ) or pipe back to one of the 2 holes you now have on the inlet. Block other hole on inlet.
Mount can somewhere
Done!
Join these 2 hoses using a T and send to 1 connector on can. Other can connector either vert to amos the clean ( but likely part burnt air? ) or pipe back to one of the 2 holes you now have on the inlet. Block other hole on inlet.
Mount can somewhere
Done!
I would take the crankcase to the can and either leave the cam cover breather as is or have it open to atmos via a small K+N. Or drill nad tap another input to the catch can.
Tony.
#158
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: Reading
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Appologes for the mix up with t-bits. The supplier has said he will sort them out once we all know what we need.
Please remember this is a univeral catch can kit and it is imposible to guess how much hose each person will want to use. It depends on where you mount the can etc.
I have been doing some planning and made a little trip to B&Q... If anyone is looking for extra hose, more t-pieces, alu pipe then B&Q have it all...
Alu tube = £2.60
Poly Tubing = £2.31 per meter
Poly Tubing Connectors (aka T-pieces) = £3 for two
Hose Clips = £6.26 for 20
This will give me enough parts to fit two cantch tanks with all ends connected up (not to atmospher)
I will be fitting my can as soon as I find some time to do a propper job and take pics for everyone.
Cheers,
Tim
Please remember this is a univeral catch can kit and it is imposible to guess how much hose each person will want to use. It depends on where you mount the can etc.
I have been doing some planning and made a little trip to B&Q... If anyone is looking for extra hose, more t-pieces, alu pipe then B&Q have it all...
Alu tube = £2.60
Poly Tubing = £2.31 per meter
Poly Tubing Connectors (aka T-pieces) = £3 for two
Hose Clips = £6.26 for 20
This will give me enough parts to fit two cantch tanks with all ends connected up (not to atmospher)
I will be fitting my can as soon as I find some time to do a propper job and take pics for everyone.
Cheers,
Tim
#159
Scooby Regular
I found these pics of a catch can install the other day
http://bbs.scoobynet.co.uk/showthread.php?t=345530
http://bbs.scoobynet.co.uk/showthread.php?t=345530
#160
Found some plugs for the inlet pipe now. Not sure how many I can get or how much each they are but could be useful. I'll try and put up a pic tomorrow!
Update : The plugs are called Suba seal, used in labs for sealing glassware for needle injections.
Seal tightly and fit well, size 33 and 24 I got fit the 2 holes just nice, clipped the roll back double seal to make extra sure they are air tight.
Update : The plugs are called Suba seal, used in labs for sealing glassware for needle injections.
Seal tightly and fit well, size 33 and 24 I got fit the 2 holes just nice, clipped the roll back double seal to make extra sure they are air tight.
Last edited by vulnax999; 21 July 2004 at 11:17 PM.
#161
Scooby Regular
Join Date: Oct 2002
Location: from the planet Omicron Persei 8. What is this emotion "Wuv" you puny Earthlings speak of ??
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
simbo - Two Big, Two Small
scooby_si - Four Big, Two Small
IPALMER - One Small
MadGrip - Two Big, Two Small
toxwaz - One Big, One Small
Jazz- Two Big
STE.W. - No Tees at all for two kits purchased!
scooby_si - Four Big, Two Small
IPALMER - One Small
MadGrip - Two Big, Two Small
toxwaz - One Big, One Small
Jazz- Two Big
STE.W. - No Tees at all for two kits purchased!
#162
Here's some interesting links on catch can installations, hope they help:
http://www.c-speedracing.com/howto/c...n/catchcan.php
http://cjsupra.kendra.com/PCV-Can.html
http://www.integra.orcon.net.nz/catchcan
http://www.lotusespritworld.co.uk/EM...CatchTank.html
http://www.c-speedracing.com/howto/c...n/catchcan.php
http://cjsupra.kendra.com/PCV-Can.html
http://www.integra.orcon.net.nz/catchcan
http://www.lotusespritworld.co.uk/EM...CatchTank.html
#164
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: Reading
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by alanbell
When should I get mine ?????? cheers Alan,
As per my post "All the cheques have cleared and so the last lot of can's will be sent out on Monday (sorry for the delay in clearing them)"
I have not got the tracking numbers from the supplier yet but will post when I do.
Cheers,
Tim
#166
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: Reading
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
This is the last batch to be sent out. VERY sorry for the delay...
rooferman - DT 5559 4288 6GB
ralphandcarol - DT 8147 8135 7GB
alanbell - DT 8147 8134 3GB
rooky1 - DT 8147 8136 5GB
RB5108 - DT 8147 8133 0GB
ben {ref rooky1} - DT 8147 8132 6GB
tomp - DT 5559 4287 2GB
I am also had this back from the supplier for the t-pieces...
"If anyone requires more t-pieces let me know mate, I know some have went out
without some, so I will ether send more out or give a couple quid refund to
anyone who wants to get their own"
...if you could update the list to let me know if you would like t-pieces or if you have a B&Q near you:
toxwaz needs - 1 Big, 1 Small
simbo needs - 2 Big, 2 Small
scooby_si needs - 2 Big, 1 Small
IPALMER needs - 1 Small
MadGrip needs - 2 Big, 2 Small
Jazz needs - 2 Big
STE.W needs - 4 Big, 4 Small
rooferman - DT 5559 4288 6GB
ralphandcarol - DT 8147 8135 7GB
alanbell - DT 8147 8134 3GB
rooky1 - DT 8147 8136 5GB
RB5108 - DT 8147 8133 0GB
ben {ref rooky1} - DT 8147 8132 6GB
tomp - DT 5559 4287 2GB
I am also had this back from the supplier for the t-pieces...
"If anyone requires more t-pieces let me know mate, I know some have went out
without some, so I will ether send more out or give a couple quid refund to
anyone who wants to get their own"
...if you could update the list to let me know if you would like t-pieces or if you have a B&Q near you:
toxwaz needs - 1 Big, 1 Small
simbo needs - 2 Big, 2 Small
scooby_si needs - 2 Big, 1 Small
IPALMER needs - 1 Small
MadGrip needs - 2 Big, 2 Small
Jazz needs - 2 Big
STE.W needs - 4 Big, 4 Small
#167
Originally Posted by TimDave25
I am also had this back from the supplier for the t-pieces...
"If anyone requires more t-pieces let me know mate, I know some have went out
without some, so I will ether send more out or give a couple quid refund to
anyone who wants to get their own"
...if you could update the list to let me know if you would like t-pieces or if you have a B&Q near you:
toxwaz needs - 1 Big, 1 Small
simbo needs - 2 Big, 2 Small
scooby_si needs - 2 Big, 1 Small
IPALMER needs - 1 Small
MadGrip needs - 2 Big, 2 Small
Jazz needs - 2 Big
STE.W needs - 4 Big, 4 Small
#168
Mine arrived this morning....cheers guys...
p.s didnt get any t-pieces,but havent looked into fitting yet so dont know which t-pieces are required...
Think i will wait till ther are sum pics of install on a classic before atempting
p.s didnt get any t-pieces,but havent looked into fitting yet so dont know which t-pieces are required...
Think i will wait till ther are sum pics of install on a classic before atempting
#169
Originally Posted by STE.W.
simbo - Two Big, Two Small
scooby_si - Four Big, Two Small
IPALMER - One Small
MadGrip - Two Big, Two Small
toxwaz - One Big, One Small
Jazz- Two Big
STE.W. - No Tees at all for two kits purchased!
scooby_si - Four Big, Two Small
IPALMER - One Small
MadGrip - Two Big, Two Small
toxwaz - One Big, One Small
Jazz- Two Big
STE.W. - No Tees at all for two kits purchased!
#171
Scooby Regular
Join Date: Nov 2001
Location: the middle bit
Posts: 8,238
Likes: 0
Received 0 Likes
on
0 Posts
i know one of the chaps whse bort one for his RX7 is on holiday ATM so if you want to send me money & T's i'm game lol otherwise OK if he/they get back at a later date?
Si
Si
#172
Scooby Regular
Join Date: Oct 2002
Location: from the planet Omicron Persei 8. What is this emotion "Wuv" you puny Earthlings speak of ??
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
Will need more hose and also have a B&Q or two round here to get the tees from.
Please refund a sensible amount for the kits I ordered.
Cheers mate.
Ste.
Please refund a sensible amount for the kits I ordered.
Cheers mate.
Ste.
#173
Scooby Regular
iTrader: (1)
Join Date: Jul 2002
Location: Berkshire
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Tim, I misread the post. I though people were asking what they got with their kit. I have 2 large T's. Won't know if I require any more until I come to fit it, at which time I will pay B&Q a vist if need be.
Sorry for the mix up.
Cheers for putting this together.
Jazz
Sorry for the mix up.
Cheers for putting this together.
Jazz
#174
Scooby Regular
Join Date: Mar 2000
Location: Hampshire
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
simbo - Two Big, Two Small
scooby_si - Four Big, Two Small
IPALMER - One Small
MadGrip - Two Big, Two Small
toxwaz - One Big, One Small
Jazz- Two Big
STE.W. - No Tees at all for two kits purchased!
Rooferman-no tees in kit
Tomp -- no tees in kit (but looks good thank you )
scooby_si - Four Big, Two Small
IPALMER - One Small
MadGrip - Two Big, Two Small
toxwaz - One Big, One Small
Jazz- Two Big
STE.W. - No Tees at all for two kits purchased!
Rooferman-no tees in kit
Tomp -- no tees in kit (but looks good thank you )
#177
Scooby Regular
iTrader: (1)
Spent the day looking around the local B+Q Superstore for some 15mm tubing like what is supplied with the kit.....nothing. Asked them too and they looked at me as if i was stupid. They had some reals of blue and green stuff @ £10
I can get some 15mm from Demon Tweeks etc but that with postage will set me back near £10 too..... i really thought this was descibed as a full kit for the Impreza. So we have a 15mm cankcase breather and are supplied with 12mm hose . I could try to force it on but it's hard enough trying to get it on the 12mm tails on the can.
Not impressed really..... we could have been warned that extra expense was needed and it was NOT a full kit for the scooby. Not a gripe at you Tim as you have done a great job of organising.
Tony.
I can get some 15mm from Demon Tweeks etc but that with postage will set me back near £10 too..... i really thought this was descibed as a full kit for the Impreza. So we have a 15mm cankcase breather and are supplied with 12mm hose . I could try to force it on but it's hard enough trying to get it on the 12mm tails on the can.
Not impressed really..... we could have been warned that extra expense was needed and it was NOT a full kit for the scooby. Not a gripe at you Tim as you have done a great job of organising.
Tony.
#180
Scooby Regular
Join Date: Mar 2003
Location: Scoobless :(
Posts: 1,210
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MadGrip
also another note that the cans have no baffles which we were told there would be. Again not a go at you Tim but I wouldn't use this supplier again
Cheers
Stuart