Jay m A

iTrader: (2)

Garry

Put me down for the 308mm kit - Grooved disks, silver calipers, Mintex 1144's.

Cheers

Justin

RLE

iTrader: (2)

GAZK

Stick me down as a definite. I will confirm the details this afternoon.

Ed Hodgson

I'm after a 283mm disc kit + carbon metallic pads for my XR4i track car, so if the group buy can improve on the £250 Ian quoted me, I'm in if that will help

Ed

555-Shaggy

I could be interested..

I'm looking for disks / pads for definate for MY97 two pots.
Could be tempted by 4 pot calipers too if the price is right, and my main concern, if they will fit under my wheels. (16" speedline - I think)

Any idea on prices etc?

RLE

iTrader: (2)

Shaggy, prices are on page 1 mate. I wouldn't waste my time going for the pads and discs, I did this and barely got any improvement on MY97 Turbo. A Waste of a couple of hundred quid. Get straight in with the 4 pots!! I'm also concerned about them fitting behind my 17" Speedlines but I've mailed Ian @ Godspeed direct for confirmation.

Garry, assuming Ian comes back to me and gives the thumbs up, I'll be a definite for the 325mm 4 pot kit, drilled discs and mintex pads. Callipers to be coloured blue. I'll also have the braided hoses and a litre of the 5.1 fluid. Will you confirm where and when we need to send the cheques on this thread?????

nickwrx

I'm a bit concerned what ron has said about the disc cracking on a drilled hole .

Has anyone else had this problem with the grooved and drilled disc's ?

nick.

p.s just to confirm what brake fluid doe's ian sell and how much is it in the group buy ?

gazk

Ok nearly there

these are the confirmed/absolutes/no going back....i mean forwards

Me
jay m a
RLE
Nathan L
Nick WRX
MKYboy
Big goon
Ed hodgson (subject to OK with Ian....Help Ian!!!!!!)

These are unconfirmed, i will mail them offline, unless they post/mail me first:

555shaggy, ustolemynamestevieturbo, ninja, tone loc, catalunya pete

Address is

Godspeed
Gees Yard
Coychurch road
Bridgend
CF31 3AP

Cheques payable to I Godney (put in a covering note saying Garry Kennedy Group Buy with your exact SET requirements). Dont send these till we got confirmed 10 though. (Ian do i get extra discount for all this xtra sh*te !!!)

Regards

GK

mkyboy

Sorry Guys

Something come up which might put my buy back a few weeks! (Gutted)

Still might only be a few weeks so if you can wait????

GUTTED mkyboy

gazk

Nick

I had Godspeed Drilled & grooved front discs on my MY99 and there was NO problems whatsoever under SERIOUS and i mean Serious track braking. Whydya think im going for an alround set this time!!....return customer speaks volumes m8

GK

gazk

mkyboys spot stays open long as poss. being one of the 1st 2 confirm. some people need brakes need soon so if we get ten we'll move........hold up your post office or sweetalk ian godney mike

GK

Ed Hodgson

Ian won't want to sell you drilled discs if you do a lot of trackdays - he recommends just grooved

RON

'Ian won't want to sell you drilled discs if you do a lot of trackdays - he recommends just grooved'


Why I wonder, cos they crack?????
Mine stil work well, and Ian says there's not a problem running with cracked discs, but thats not what my main dealer said!

Big Goon

Well I need to know a price for discs/pads(ds2500's)/hoses/dot5.1 + fitting (all in basically) before I commit.
Need an answer on here soon or will have to look at alternatives.

gazk

Ian
Help out with prices and doubters please

Again confirmed people are

Me
jay m a
RLE
Nathan L
Nick WRX
MKYboy (funds ready in 2-3 weeks)
Big goon (subject to price.....ian help)
Ed hodgson (subject to OK with Ian....Help Ian!!!!!!)
ustolemynamestevieturbo(funds ready in 2-3 weeks)

These are unconfirmed,

555shaggy, ninja, tone loc, catalunya pete

Come on fellaz

GK

Scoob_Tube

On the web site it says £550, not £575 for the 308 kit.

I would go in on this anyway but i went metal to metal today(doh!) and need to order tomorrow (Wed)

RS1800

X SOOOBY

i hve the standard 4 pots is it worth going for the disks and calipers would they work better or should i go for the disks

i have seen the disks with the standard calipers and i am not sure if i like the look of them as the pads overhang the calipersand so i dont think they look that neat and so do the supplied calipers look and fit better

Godspeed Brakes

iTrader: (259)

If you are doing track days or a hard driver you will eventually get heat crazing/cracks in your discs , it doesn't matter what make they are it will happen , it may take a while to appear , if you have cross drilled discs the cracks will be bigger around the holes , this is why I recommend grooved only for hard use or track days , small cracks in the discs will not give you any problems but if they crack across the face of the discs they need changing ,

We were going to offer the group buy for kits only and not standard sized discs but if you are short on numbers , you can make up the numbers with discs , sorry subaru only .

Front discs
277mm discs retail £150 group buy £135
294mm discs retail £175 group buy £160

rear discs
Solid discs retail £125 group buy £110
vented discs retail £145 group buy £130

XSOOOBY , on the 335mm kit you have seen the pads we supply in this kit are not pads designed for the subaru caliper , we use a much bigger pad , because the pad is much bigger it is in fact slightly too big which is why the pads overhang slightly on the outer edge , we have looked into having a pad specially made to suit this kit perfectly but it would add £75 to the set of pads !!

For those wanting fitting we can offer this as well.

Cheers Ian

Mr J

What's the biggest kit that will fit under a set of 16" wheels ??

/Jan

NINJA

ian what is the price for a blue anodised bell and grooved and drilled disc to replace the alcon i think it has to be 330x28mm.also what can u do for the rears on a p1

gazk

confirmations please. u heard Ian, doesnt have to be a kit to get this group buy going. Come on people before the previous posters lose interest

GK

Ed Hodgson

no Fords allowed then

as it's awaiting a new back axle, I'm not in a rush for the discs, just thought I might help you get the numbers up

I don't need discs for my Subaru right now - got a spare set in the garage

Ed

gazk

update

confirmed people are

Me
jay m a
RLE
Nathan L
Nick WRX
MKYboy (funds ready in 2-3 weeks)
Big goon (subject to price.....ian help)
ustolemynamestevieturbo(funds ready in 2-3 weeks)

These are unconfirmed,

555shaggy, ninja, catalunya pete

Out??
Ed hodgson (Ford gear reqd}
tone loc (time?)

Keep them comin, only need TWO more people, nearly there

GK

gazk

jan/mr j

biggest kit on 16s is the 308 kit which i had on my my99. Excellent sdtopping power!

Ninja

Id speak direct to ian bout the blue anodised stuff as he appears to be missin ur post

Big goon

525 kit + 20 4 2litres of 5.1 + 50 for the hoses + %(%, as per page 1 of post

X scooby

My m8 has got the same set up ur looking at & has no chew at all with them (which is why im gettin the same!). He'll post a pic up + opinion later today

GK

Nathan L

GK

Sorry mate, I've got to pull out for the time being.

Need to spend the money on a problem with the car. Mega ££££'s

Nathan..

gazk

Latest interest below.... only needs couple more takers

Me
jay m a
RLE
Nathan L (funds 3 weeks)
Nick WRX
MKYboy (funds ready in 2 weeks)
Big goon
ustolemynamestevieturbo(funds ready in 2 weeks)

Nathan L

Gaz

Think you need to read my post above mate.

My Impreza needs some money spent on it which is going to prevent me from taking part in the group buy.

Sorry, but not a lot I can do about it. Car or brakes without car?

Nathan..

gazk

lets have more interest please or this is gonna drag on and on.....OR people will start 2 pull out

GK

nickwrx

C'mon people only need another two or three people , i'm in urgent need of some decent brakes !!!!
it all make's sense, i save some money, you save some money , there's no catch .

nick.

Forester_GP

I'm in for the 308mm kit, grooved, gold calipers.

Ian, i had inquired about this kit for my Forester during summer but i kind of neglected it due to summer vacation etc.etc. Just confirm me the payment method (i do have your bank details) for shipping to Greece. Details will follow.

Regards,

George

JonW

Go for it guys! I've had Ians 294mm std disks (drilled and grooved) and mintex 1144 pads (now doing sterling service on another Scoobynetter's car) and now the huge 335kit with Greenstuff pads and have to say Ian's kit is just what my car needed! Dinner plates anyone?!?!? :-)

I'm tempted to get new grooved rears to match my fronts but funds are short now, shame really.

Anyway - get these.... you wont be dissapointed, also I had mine fitted at Ian's - I'm sure someone will put a link in to my post on my thoughts about the whole process, was posted late August this year if you wanna search for it.

Jon.