Will fitting a splitter make the car hit bumps etc
#1
Scooby Regular
Thread Starter
Join Date: Dec 2011
Location: birmingham
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
Will fitting a splitter make the car hit bumps etc
Hi guys.
Got a quick Q for you that I'm hoping a lot of you can answer easily.
I originally fitted a V-limited style front splitter on my blob eye. Since then I have lowered the car on Tien springs which are rated to lower the car around 35mm up front, because IMO the front end sat way too high. Anyway, Since then I have been too scared to fit the splitter back on because my usual route to work has a few sleeping policeman on the way.
So was just wondering If any of you guys run the v-limited front end and are lowered 35mm or more, and can still use the car practically - get over bumps etc.
The last thing I want is to fit it and the first bump I go over just rip the thing off and wreck it. If thats the case Ill just bang it on ebay before i wreck it lol.
TIA. Aaron.
Got a quick Q for you that I'm hoping a lot of you can answer easily.
I originally fitted a V-limited style front splitter on my blob eye. Since then I have lowered the car on Tien springs which are rated to lower the car around 35mm up front, because IMO the front end sat way too high. Anyway, Since then I have been too scared to fit the splitter back on because my usual route to work has a few sleeping policeman on the way.
So was just wondering If any of you guys run the v-limited front end and are lowered 35mm or more, and can still use the car practically - get over bumps etc.
The last thing I want is to fit it and the first bump I go over just rip the thing off and wreck it. If thats the case Ill just bang it on ebay before i wreck it lol.
TIA. Aaron.
#3
Scooby Regular
What size alloys you running on pal?
#4
Scooby Regular
Thread Starter
Join Date: Dec 2011
Location: birmingham
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
To say a UK impreza is tuned to handle from the factory i think is an over statement to say the least. After coming from a JDM EVO5 and STI6 in previous years, and owning 2 uk spec imprezas since, its plain to say (and i think most will agree) that the uk models handle crap in comparison. They wallow/roll about and under steer terribly. The mods I have done which are jdm sti dampers, tein springs, 22mm rear roll bar and solid drop links have ironed all them problems out and now the car handles how I expect and want it too. And it looks a hell of a lot better. Cheers for the reply though
#7
Scooby Regular
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Dec 2011
Location: birmingham
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
Generally speaking, are most speed bumps around the same height as normal kurbs? around 100mm or so?
cheers all.
#9
Scooby Regular
Haha, lovely that though mate. And to be honest, if anything the front looks slightly lower on yours than mine so i may give it a whirl. Id put a picture up of my own if i could get this damn pc to load photobucket lol
Generally speaking, are most speed bumps around the same height as normal kurbs? around 100mm or so?
cheers all.
Generally speaking, are most speed bumps around the same height as normal kurbs? around 100mm or so?
cheers all.
I do drive it easy over the bumps trick is not to brake hard when approaching but nice and easy no probs
Now get that splitter back on bro
#10
Scooby Regular
Mine and martins hawkeye which is sat on coilovers and splitter using 17" bbs's no problems there neither
#11
Scooby Regular
iTrader: (6)
In short, no it won't be a problem. The only issue you'll have is that the bumper will no longer go over a kerb so be careful not to park the front too far forward or overhang the front while turning in. It will hit the splitter every time.
Other than that no issues at all running low with a splitter.
Other than that no issues at all running low with a splitter.
#12
Scooby Regular
Thread Starter
Join Date: Dec 2011
Location: birmingham
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
In short, no it won't be a problem. The only issue you'll have is that the bumper will no longer go over a kerb so be careful not to park the front too far forward or overhang the front while turning in. It will hit the splitter every time.
Other than that no issues at all running low with a splitter.
Other than that no issues at all running low with a splitter.
And thanks everyone for the help.
Heres mine if ive sorted the link properly lol. From looking at the twos ride height above i agree i should be fine. So ill get it back on the weekend
#13
Scooby Regular
iTrader: (30)
that ride height looks spot on.
ive come from lowered on coilovers to jdm shocks and springs and a 22m rear bar with spec c 20mm front bar.
to me its spot on for our roads, feels so much more planted than on coilovers.... just my opinion
Siv
btw i gave up on splitters after destroying 2 in 6 months, again, just in my opinion an absolute waste of money
ive come from lowered on coilovers to jdm shocks and springs and a 22m rear bar with spec c 20mm front bar.
to me its spot on for our roads, feels so much more planted than on coilovers.... just my opinion
Siv
btw i gave up on splitters after destroying 2 in 6 months, again, just in my opinion an absolute waste of money
Last edited by sivo; 18 October 2016 at 07:12 PM.
#14
Scooby Regular
#15
Scooby Regular
Thread Starter
Join Date: Dec 2011
Location: birmingham
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
We will see how long it lasts. To be homest i dont mind too much if i knock the splitter and kill that, i just dont want it carrying damage through to the bumper etc. if i can get away with it though its going on cos the front end looks a hell of alot meaner with it on in my opinion.
Cheers guys.
Cheers guys.
#17
Scooby Regular
#18
Scooby Regular
i wanna put some coilovers on my hatchback also.
for all you guys with hatchbacks, whats the ideal height for it too get lowered by without messing up handling etc ?.
im running 18's and the suspension is still as standard.
cheers
for all you guys with hatchbacks, whats the ideal height for it too get lowered by without messing up handling etc ?.
im running 18's and the suspension is still as standard.
cheers
#19
rubber strip accross lower front bumper
do any of u lads know any info on them ? usually attached to circuit cars etc or time attack cars. and fitted with pot rivets by the looks of it.was thinking of getting something similar to hide a bad crack I have in my p1 style splitter.
#20
Scooby Regular
Thread
Thread Starter
Forum
Replies
Last Post
Paul C
Full Cars Breaking For Spares
28
09 October 2016 09:18 PM